• 유공압시스템학회논문집
• /
• 제8권1호
• /
• pp.19-25
• /
• 2011

This study presents the design of digital amplifier.controller for a proportional control valve and the development of PID discrete control scheme by using RCP(Rapid Controller Prototyping) system. RCP system is the device to embed the control code developed in PC into the microcontroller on-site. Ramp input test using the digital amplifier.controller developed in this study was carried out for the proportional control valve of domestic production and Bosch Rexroth respectively. The instability problem occurred around maximum displacement of localized valve spool at ramp input test was solved by supplementing offset current to the duty ratio of PWM(Pulse Width Modulation) driving signal to the solenoid. The comparison of test results between localized proportional control valve and Bosch Rexroth's product shows that the characteristics obtained by ramp input test and static flow gains are alike each other. Two valves are about the same in dead bands and hysteresis characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.504-504
• /
• 2000

The flow ratio in the industrial process is usually accomplished by using PID controller with series type ratio. But always the large overshoot and a long rise time may be achieved from this conventional control. These problems are involved to the inexact flow ratio control. In order to avoid this poor performance. the paper presents a designing of the two controller modes for the flow ratio plants. This proposed controller combine the lookup table technique and the well-known PID controller to obtain the fast response and low overshoot of flow ratio control. The PID controller mode will be operated when the flow ratio reaches the preset value while the lookup table technique mode is applied for initial operation. The data in tile table is calculated by the valve sizing equation and convened to the valve position control signal. The experimental results show that the transient and steady state responses of the control systems using the proposed technique can be efficiently obtained when compared with tile conventional controller.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.10-17
• /
• 2007

자동차 미끄럼방지 장치의 최적 제어를 위해서는 유압 모듈레이터 특히, 솔레노이드 밸브에 대한 정확한 동특성 해석이 필요하다. 그러나, 현재까지 진행된 대부분의 연구들은 솔레노이드 밸브 자체만을 고려하였기 때문에 실제 자동차 미끄럼방지 장치에 제한적으로 적용되었다. 본 연구에서는 유압 모듈레이터에 작용하는 압력을 고려한 솔레노이드 밸브의 동특성 해석을 위하여 실험과 이론 해석을 실시하였다. 작동 압력이 솔레노이드 밸브의 동특성에 끼치는 영향을 정량적으로 해석하였고 설계인자를 변화시키면서 성능향상 방안을 제안하였다. 따라서, 본 연구에서 수행한 솔레노이드 밸브 동특성 해석결과는 자동차 미끄럼방지 장치의 최적 제어 기준으로 활용할 수 있을 것이다.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1692-1701
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.110-118
• /
• 2008

It is essential for the valid design of a marine flow-control valve to exactly know its flow characteristics. The present study has numerically investigated the flow characteristics inside a marine throttle-type globe valve using a kind of commercial CFD code, CFX10.0, with an adoption of the SST (Shear-Stress Transport) turbulence model. To validate the numerical approach, the flow coefficients are compared with the experimental ones. Results show that the globe valve is effective in the control of flow rate according to the opening ratio in case of the forward-direction flow, whereas it is effective in the flow shutoff in case of the reverse-direction flow. Around the inlet of the valve, a recirculation region is formed due to the blunt body shape, the turbulence intensity becomes strengthened and then an abrupt pressure loss occurs.

• 항공우주기술
• /
• 제5권2호
• /
• pp.126-133
• /
• 2006

본 논문에서는 제어밸브에 대한 유공압적, 기계적, 전기적 부분에 대하여 전반적인 기술적인 사항 및 설계 기술들을 다루었다. 특히 제어밸브를 이용한 시험으로부터 도출하기 어려운 많은 요소의 동특성을 시스템 모사코드인 AMESim을 이용하여 예측해보았고, 일반적인 물리적 동특성도 또한 실제 시험결과와 비교 검토하였다. 또한 제어밸브의 단품 상태에서의 동특성 외에 시스템 연계 상황에서의 특성도 예측하고자 하였고, 이를 근간으로 하여 발사체 엔진 추진제공급시스템의 제어 관련 분야에 응용하였다.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.74-84
• /
• 2005

본 논문에서는 AMESim(상용 소프트웨어)을 이용, 개방형 터보펌프식 엔진시스템을 모델로 하여 산업용 제어밸브를 적용한 시스템의 특성을 미리 확인하였다. 그 결과물을 토대로 하여 앞으로 발사체 제어밸브 개발할 계획이며, 밸브와 연계된 제어 및 밸브시험을 위한 설비 특성을 예측해 보았다. 시스템시험을 위해 장착할 각 산업용 제어밸브의 PID 값을 찾고자 하였으며, PI 및 PID 제어 방식을 이용하여 제어밸브의 과도 및 정상상태의 유동특성을 비교분석하였다. 제어밸브를 이용하여 추력제어 및 TDS 구현을 목적으로 하는 밸브설계와 시스템의 종합 모사시험을 위한 설비의 설계 조건을 또한 제시하였다.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.88-94
• /
• 2005

A swirl ratio of a charge in the cylinder could be calculated by measuring both the rotary speed of paddle and the intake air flow rate in the swirl measurement apparatus fur several positions of valve lift. The automation of the swirl ratio measurement for a cylinder head is achieved by controlling both the valve lift of cylinder head and a suction pressure of the surge tank, instead of controlling them manually. PID control of the surge tank pressure and positioning a valve lift of the cylinder head are also achieved by using two step motors, respectively. Rotating speed of a paddle are measured using an optical sensor and a counter. Flow rate are measured from ISA 1932 flow nozzle by reading a differential pressure gauge position using IEEE-1394 camera. Time to measure the swirl ratio for a port in the cylinder head is drastically reduced from an hour to 3 minutes by automation control of the apparatus.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.680-683
• /
• 1996

The dynamics of the vehicle system has highly nonlinear components such as an engine, a torque converter and variable road condition. This thesis proposes a Fuzzy Logic Algorithm that shows better control performance than Antiwindup PI in the highly nonlinear vehicle system. Traction Control System(TCS), which adjusts throttle valve opening by Fuzzy Logic Algorithm improves vehicle drivability, steerability and stability when vehicle is starting and cornering. When a throttle valve is opened at large degree, Fuzzy Logic Algorithm shows better performances like a small settling time and a small oscillation than Antiwindup PI in simulation. The decreased desired slip ratio improves steerability in the simulation when a vehicle is cornering. The Fuzzy Logic Algorithm has been tested by a 1/5-scale vehicle for tracking the constant desired velocity.