• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.138-151
• /
• 2021

The effect of a reactant ratio on the growth of a buoyancy-driven instability in an irreversible A+B→C reaction system is analyzed theoretically and numerically. Taking a non-stoichiometric reactant ratio into account, new linear stability equations are derived without the quasi-steady state assumption (QSSA) and solved analytically. It is found that the main parameters to explain the present system are the Damköhler number, the dimensionless density difference of chemical species and the ratio of reactants. The present initial grow rate analysis without QSSA shows that the system is initially unconditionally stable regardless of the parameter values; however, the previous initial growth rate analysis based on the QSSA predicted the system is unstable if the system is physically unstable. For time evolving cases, the present growth rates obtained from the spectral analysis and pseudo-spectral method support each other, but quite differently from that obtained under the conventional QSSA. Adopting the result of the linear stability analysis as an initial condition, fully nonlinear direct numerical simulations are conducted. Both the linear analysis and the nonlinear simulation show that the reactant ratio plays an important role in the onset and the growth of the instability motion.

• 한국지반공학회논문집
• /
• 제32권9호
• /
• pp.37-50
• /
• 2016

쇄석다짐말뚝(GCP)은 연약지반의 지지력 증가와 침하량의 감소를 실현할 수 있어 연약지반 개량에 활발하게 사용되고 있다. GCP 설계에 필요한 응력분담비는 치환율, 상재하중, 깊이 등에 따라 달라진다. 많은 연구자들이 현장실험, 실내실험, 수치해석 연구를 통해 쇄석으로 이루어진 GCP에 대해 치환율에 따른 응력분담비를 제시하였으나, 쇄석과 모래의 배합비에 따른 응력분담비에 관한 연구는 전무한 실정이다. 따라서 본 연구에서는 선행연구 분석과 수치해석을 통해 배합비와 치환율에 따른 응력분담비를 명확히 규명하고자 하였다. 이를 위해 유한요소해석 프로그램인 ABAQUS 6.12-4를 사용하여 GCP가 시공된 복합지반을 모델링하여 배합비와 치환율에 따라 복합지반의 과잉간극수압과 응력분담비를 분석하였다. 선행연구 분석결과, GCP 복합지반의 응력분담비에 관한 연구에서 일반적으로 현장에서 정재하시험, 실내시험, 수치해석을 통해 얻은 응력분담비는 각각 1.7~3, 2~7.5, 2~6.5 범위로 나타났으며, 쇄석과 모래의 배합비에 관한 연구에서는 일반적으로 클로깅현상을 저감시키기 위해 실내실험 한 결과로 쇄석과 모래의 최적배합비가 70:30으로 나타났다. 수치해석결과, 일반적인 GCP 복합지반의 치환율이 증가함에 따라 응력분담비가 치환율 30%까지는 증가하다가 40%에서는 다시 감소하는 경향이 나타났으며, 쇄석과 모래의 배합비에 따른 응력분담비는 일반적으로 모래의 함유량이 증가함에 따라 쇄석과 모래의 배합비가 70:30까지는 증가하다가 60:40 이후에 다시 감소하는 경향이 나타났다.

• 서비스연구
• /
• 제4권1호
• /
• pp.71-81
• /
• 2014

전체 경제활동참가율을 비롯하여 남녀별 경제활동참가율에 대한 각 지역별 비교분석결과는 중앙 및 지방정부의 정책 자료로서 중요하다. 이러한 비교분석결과를 통하여 중앙 및 지방정부는 지역별 차별정책의 사용이 가능해 지는 동시에 세부적인 정책적용의 효율성도 제고시킬 수 있게 된다. 본 논문은 국내 16개 시 도 지역에 대한 경제활동인구조사 자료를 토대로 수도권, 강원권, 충청권, 영남권, 호남권 등 5개 광역권으로 분류하여 이들 지역에 대한 남녀별 경제활동참가율을 비교분석한 것이다. 지역별 비교를 위해서 사용한 자료는 2000년부터 2012년 동안 최근 13년간의 국내 경제활동인구조사 자료이며, 이 자료를 통해 5개 지역에 대한 전체 경제활동참가율과 남녀별 경제활동참가율을 계산하였다. 그리고 남성에 대한 여성 경제활동참가율의 상대비율에 대해 지역별로 비교분석하였으며 또한, 각 지역에 대해 남녀별 경제활동참가율을 비교분석하였다.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.186-192
• /
• 2015

This paper describes the electromagnetic and mechanical characteristics of coaxial magnetic gear (CMG) with a low gear ratio. The analysis models are restricted to a CMG with a gear ratio of less than 2. The electromagnetic characteristics including transmitted torque and iron losses are presented according to the variation of the gear ratio. The pole pairs of high speed rotor are chosen as 6, 8 and 10 by considering the torque capability. As the gear ratio approaches 1, both iron losses on the ferromagnetic materials and eddy current losses on the rotor permanent magnets are increased. The radial and tangential forces on the modulating pieces are calculated using the Maxwell stress tensor. When the maximum force is exerted on the modulating pieces, the mechanical characteristics including stress and deformation are derived by structural analysis. In CMG models with a low gear ratio, the maximum radial force acting on modulating pieces is larger than that in CMG models with a high gear ratio, and the normal stress and normal deformation are increased in a CMG with a low gear ratio. Therefore, modulating pieces should be designed to withstand larger radial forces in CMG with a low gear ratio compared to CMG with a high gear ratio.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.227-234
• /
• 2003

This study presents the stress evaluation equations of circular column-box beam connection in steel frame piers. FEM analysis were carried out for circular column-box beam connection. Analysis models were made for design parameters such as joint angle, span length-width ratio(L/B), sectional-area ratio(S=A/sub w/A/sub f/), and circular column-box beam stiffness ratio(Ic/Ib). Analysis results were compared to the existing equation. Based on analysis results the stress evaluation equations of circular column-box beam connection are proposed by regression analysis.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.40-48
• /
• 2012

In this study, economic analysis of five desalination technologies for saline agricultural land was carried out. The analysis was comprehensively evaluated by calculating changes in crop production and benefit/cost (B/C) ratio. The analysis of crop production was in the order of tomato > cucumber > a (musk) melon > watermelon > cabbage, and economical efficiency for desalination technology was in the order of soil exchange > soil addition > electrokinetics > under-drainage > subsoil reversal. In cost benefit analysis, B/C ratio was in the order of under-drainage > soil exchange > electrokinetics > soil addition > subsoil reversal, and all desalination technologies used in this study have the ratio higher than 1, which means economical efficiency was high. Based on the net production considering B/C ratio, the general economic analysis was exactly order from that of crop production analysis. As a result, economical efficiency of soil exchange was highest, and economical efficiency of soil addition and electrokinetic was relatively higher than others.

• 한국유기농업학회지
• /
• 제26권4호
• /
• pp.599-607
• /
• 2018

This study analyzed the management situation of two organizations that have produced environmentally friendly agricultural and livestock products. One organization sells and processes environmentally friendly agricultural products like as grains, vegetables, fruits and processing foods. Another organization processes and sells environmentally friendly livestock products, specially beef products. Indices of management analysis are stability ratio, activity ratio and profitability ratio. Stability ratio indices are debt ratio, net worth ratio, fixed ratio and current ratio. Activity ratio ones include fixed assets turnover and net worth turnover. And profitability ratio is showed through return on investment, net return on sales and return on equity.

• 한국유기농업학회지
• /
• 제30권4호
• /
• pp.471-483
• /
• 2022

This study analyzed management situations of two organizations that have produced environment-friendly agricultural and processed meat products. 'A' farming corporation sells environment-friendly agricultural products like as grains, vegetables, fruits and processing foods. 'B' agricultural corporation processes and sells environment-friendly processed meat products, specially organic and antibiotic-free beef products. Recently, members and production areas of 'A' farming corporation have decreased because of their aging and labor shortage. And Indices for the management analysis are stability ratio, activity ratio and profitability ratio. Stability ratio indices are debt ratio, net worth ratio, fixed ratio and current ratio. Activity ratio ones include fixed assets turnover and net worth turnover. And profitability ratio is showed through return on investment, net return on sales and return on equity.

• 대한영양사협회학술지
• /
• 제6권1호
• /
• pp.33-43
• /
• 2000

Environmental pressures from such sources an economic condition, the government and inter-institutional competition create managerial challenges. Economic pressures may be forcing dietetic dept, in hospital to utilize cost∙benefit analysis to assist them in their problem solving. Cost∙benefit analysis have been widely used in business, industry and many other fields with only limited application to foodservice. Due to the lack or this information the purposes of this study were to identify use of cost∙benefit analysis in hospital foodservice system to evaluate the economic efficiency of alternatives, and to make recommendation for operation system change. Using the cost∙benefit method, cash flows are separated into cost and benefits. For an alternative to be selected, indicators, such as NPV, benefit-cost ratio (B/C ratio) with 5% discount rate per annum. The sensitivity analysis was also conducted with difference rate 3%, 7% respectively and reduced employee payroll change. The result of this study can be summarized as follows : 1. The total cost of investment for operation system change was 390,570 thousand won and the total benefit through operation system change was 865,808 thousand won. 2. Net present value(NPV) for 5 years was 475,239 thousand won and benefit-cost ratio was 2.22. 3. In sensitivity analysis with different discount rate 3%, 7%, benefit-cost ratio was 2.25, 2.18 respectively, with total reduced employee payroll change, benefit-cost ratio was 2.86. In conclusion, total benefits were exceeded total costs. Therefore, the project of operation system change in hospital foodservice was found to be economically efficient.

• Tribology and Lubricants
• /
• 제17권1호
• /
• pp.22-27
• /
• 2001

This paper presents an analysis of eccentricity ratio of rolling piston using mobility method which is a powerful tool for analyzing dynamically-loaded journal bearings with efficiency and applicability. And, we investigate influences of design parameters (discharge pressure, radial clearance, rotational velocity of shaft, and eccentricity of compressor) on bearing load and eccentricity ratio. The results show that the discharge pressure, radial clearance and rotational velocity of shaft have significant influence on eccentricity ratio, and the discharge pressure and eccentricity of compressor have influence on bearing load.