• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.121-128
• /
• 1991

In order to use viscoelastic materials efficiently for noise and vibration control, or th qualify newly developed materials, knowledge of the Young' s modulus and loss factor is essemtial. These material properties, the so-called complex Young' s modulus, are frequently treated as dynamic charicteristics because of their dependence upon the frequency. Many techniques have been developed and verified for measuring complex Young' s modulus of viscoelastic materials. Among them, the impedance method is preferable in order to obtain the frequency information in detail. In this method, a cylindrical or prismatic specimen is excited into longitudinal harmonic vibration at one end, the other being fixed, and the resulting force is measured at the driving or fixed end. The amplitude ratio of the two signals and phase angle between them are then used to compute the material properties using various mathematical models. In this paper, the impedance method is investigated theoretically and experimentally. A way to determine the specimen geometry which is most appropriate for the identification of complex Young' s modulus using the lumped mass model is presented and discussed. Then experimental results supporting the theoretical predictions are presented.

• Smart Structures and Systems
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2018

A method is proposed to detect structural damages in the presence of damping using noisy data. This method uses Frequency Response Function (FRF) and Mode-Shapes as the input parameters for a system of Couple Sparse Coding (CSC) to study the healthy state of the structure. To obtain appropriate patterns of FRF for CSC training, Principal Component Analysis (PCA) technique is adopted to reduce the full-size FRF to overcome over-fitting and convergence problems in machine-learning training. To verify the proposed method, a numerical two-story frame structure is employed. A system of individual CSCs is trained with FRFs and mode-shapes, and then termed ensemble to detect the health condition of the structure. The results demonstrate that the proposed method is accurate in damage identification even in presence of up to 20% noisy data and 5% unconsidered damping ratio. Furthermore, it can be concluded that CSC ensemble is highly efficient to detect the location and the severity of damages in comparison to the individual CSC trained only with FRF data.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.679-697
• /
• 2014

The strain data acquired from structural health monitoring (SHM) systems play an important role in the state monitoring and damage identification of bridges. Due to the environmental complexity of civil structures, a better understanding of the actual strain data will help filling the gap between theoretical/laboratorial results and practical application. In the study, the multi-scale features of strain response are first revealed after abundant investigations on the actual data from two typical long-span bridges. Results show that, strain types at the three typical temporal scales of $10^5$, $10^2$ and $10^0$ sec are caused by temperature change, trains and heavy trucks, and have their respective cut-off frequency in the order of $10^{-2}$, $10^{-1}$ and $10^0$ Hz. Multi-resolution analysis and wavelet shrinkage are applied for separating and extracting these strain types. During the above process, two methods for determining thresholds are introduced. The excellent ability of wavelet transform on simultaneously time-frequency analysis leads to an effective information extraction. After extraction, the strain data will be compressed at an attractive ratio. This research may contribute to a further understanding of actual strain data of long-span bridges; also, the proposed extracting methodology is applicable on actual SHM systems.

• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.569-576
• /
• 2020

Employment of the wave propagation approach with the combination of Pasternak foundation equation gives birth to the shell frequency equation. Mathematically, the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. A cylindrical shell is placed on the elastic foundation of Pasternak. For isotropic materials, the physical properties are same everywhere, whereas the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. The influence of the elastic foundation, wave number, length and height-to-radius ratios is investigated with different boundary conditions. The frequencies of length-to-radius and height-to-radius ratio are counter part of each other. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down for the variations of wave number. It is found that due to inducting the elastic foundation of Pasternak, the frequencies increases. It is also exhibited that the effect of frequencies is investigated by varying the surfaces with stainless steel and nickel as a constituent material. MATLAB software is utilized for the vibration of functionally graded cylindrical shell with elastic foundation of Pasternak and the results are verified with the open literature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.175-184
• /
• 2022

This study analyzed the allocation of the skipper's attention during fishing operation in the wheelhouse of a Korean coastal composite fishing vessel by using video observation. To summarize the results, the ratio of lookout, radar and GPS monitoring, which is essential for prevention of collision at sea, was significantly lower than that of other fishing operation due to the attention concentration on the work place during hauling line. In order to reduce exposure to risk of collisions due to concentration of attention to certain tasks such as line hauling, it is necessary to develop an alert system that can notify the approach of other ships or obstruction throughout the ship using information from radar or the automatic identification system. In addition, the order of attention allocation to devices and facilities obtained in this study is expected to be used as basic data for device or facility layout based on the principle of usage frequency in designing wheelhouse for coastal composite fishing vessels in the future.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.5 s.51
• /
• pp.107-115
• /
• 2006

The power supply system is one of the most important infrafacilities which should maintain their inherent function during and after earthquakes. This study was performed to analyze dynamic characteristics and seismic performance of Korean typical 154kV transformer porcelain bushing. For the purpose of this study, actual 154kV porcelain bushings were selected and tested on the shaking table. The vibration tests consist of modal identification tests, seismic performance tests, and fragility tests. The sine sweep waves, artificial earthquake waves, and continuous resonant sine waves were used as shaking table motions. This paper describes the test specimens, shaking facilities, and test methods. Natural frequencies and damping ratios of the bushing have been evaluated from the experimental data. The failure mode and the performance level of the Korean transformer bushing have been first identified in this study.

• The Journal of Korean Medicine
• /
• v.34 no.1
• /
• pp.179-191
• /
• 2013

Kleine-Levin syndrome is a rare disorder characterized by recurrent episodes of hypersomnia, hyperphagia, hypersexuality and delusion and hallucination with spontaneous recovery. A 17-year-old female suddenly showed hypersomnia, severe fatigue, and compulsive hyperphagia. She was diagnosed with suspected Kleine-Levin Syndrome. The precipitating factor was an upper respiratory tract infection that the patient had undergone 2 weeks prior. Past psychiatric history included somnambulism and ADHD; her symptoms of ADHD included attention deficit, impulsiveness, hyperactivity, and irritability. This was her third episode. Her hypersomnia was longer in duration but lower in frequency compared with usual KLS. Her low LF/HF ratio in heart rate variability measurement showed high parasympathetic nerve activity. A MMPI report showed some psychological problem. The patient was diagnosed of gastric fever by pattern identification. Her hypersomnia episode improved 6 weeks after onset. This is the first reported case of suspected Kleine-Levin Syndrome in the field of Oriental Medicine in Korea.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.51-54
• /
• 2000

차세대 초고속 무선 전송을 위한 OFDM (orthogonal frequency division multiplexing) 방식에서는 전송 신호의 진폭이 큰 PAPR (peak-to-average power ratio)을 갖게 되어 송신기에서 사용되는 고출력 증폭기의 비선형성에 의해 큰 왜곡을 받게 된다. 이러한 왜곡의 보상을 위하여 우리는 고정점 반복 (fixed point iteration)에 기반한 사전왜곡기 (predistorter)를 제안하였으나, 이는 고출력 증폭기의 특성이 변화하지 않는다는 가정에서 구현되었다. 본 논문에서는 구간 선형 근사에 기반하여 고출력 증폭기의 시변 특성을 추종하는 새로운 기법과 이렇게 근사된 고출력 증폭기 특성을 이용하는 적응적인 고정점 반복 사전왜곡기의 구현을 제안한다. 모의실험 결과, 제안된 고출력 증폭기 근사 방법은 랜덤한 증폭기 특성 변화를 매우 효과적으로 추종하며 이러한 근사 결과를 이용한 고정점 반복 사전왜곡기는 우수한 성능을 보임을 확인하였다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.552-555
• /
• 2007

In this study, the MODIS NDVI for the period of $2000{\sim}2007$ was collected and processed to obtain VCI and SVI which are the quantitative indexes of drought. The VCI and SVI based on NDVI can be used for understanding seasonal pattern of vegetation, drought identification and quantitative analysis of drought. VCI and SVI compared with monthly precipitation ratio to average, Standardized Precipitation Index(SPI), and etc., which are used to identify spring drought, to analyze drought region, similarity and difference in drought severity. In addition, frequency of Spring droughts were calculated for the period of $2000{\sim}2007$, and the usability of the MODIS images as a tool for establishing countermeasures against drought was presented by analyzing drought frequently areas.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.216-218
• /
• 2006

This letter presents the design for a low-profile planar inverted-F antenna (PIFA) that can be stuck to metallic objects to create a passive radio frequency identification (RFID) tag in the UHF band. The designed PIFA, which uses a dielectric substrate for the antenna, consists of a U-slot patch for size reduction, several shorting pins, and a coplanar waveguide feeding structure to easily integrate with an RFID chip. The impedance bandwidth and maximum gain of the tag antenna are about 0.3% at 914 MHz for a voltage standing wave ratio (VSWR) of less than 2 and 3.6 dBi, respectively. The maximum read range is about 4.5 m as long as the tag antenna is on a metallic object.