• 제목/요약/키워드: Rated Power

검색결과 755건 처리시간 0.031초

Prototype Development of a Three-wheel Riding Cultivator and Its Basic Performance

  • Lee, Beom Seob;Yoo, Soonam;Lee, Changhoon;Choi, Il Su;Choi, Yong;Yun, Young Tae
    • Journal of Biosystems Engineering
    • /
    • 제43권4호
    • /
    • pp.285-295
    • /
    • 2018
  • Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

간호사 이미지에 관한 연구 (A Study on Image of the Nurse)

  • 김형자;김현옥
    • 간호행정학회지
    • /
    • 제7권1호
    • /
    • pp.97-110
    • /
    • 2001
  • An image exists in the thought of every subjective person and it exercises its influence over everything, having a great power in the real world. An positive image of the nurse has an influence on her faith, value and confidence, therefore increasing her job satisfaction, helping to upgrade her level of profession of nursing through qualitative nursing service as a result, considering the necessity of such an image when it comes to improvement of the profession, the confirmation of the image is indispensable to its evaluation of a speciality in nursing. This study is intended to help that improvement of the nursing profession in the present so that the total effort in every field of nursing is made and to offer basic material for developing a strategy to improve the image of nurses. This study is designed to investigate such an image descriptively. The subjects include 105 nurses, 60 doctors, 68 office workers, 88 medical engineers, 127 patients and there protectors with a total of 448 adapted with accidental sampling, who work at Y and W general hospital in Chonju. The measuring instrument consists of 40 question, with the researcher amended and made from on of Inja Song(1993), Donsoon Lee(1995), Ilsim yang(1998), and its Cronbach's alpha coefficient is .95. Data were collected from March 1 2000 to March 20, 2000 using self-reported questionnairs, analyzed with SPSS WIN 7.5 after encoding. The results are as follows: 1. Most of the subjects thinks the nursing as a hard, stressful, always busy job(more than 75%), and consider nurses as good-looking, supportive and responsible to co-workers to above average degree($50.0{\sim}74.9%$), especially it shows the idea that nursing is independently academic job and has come to fasten itself upon the public. But it shows below the everage($25.0%{\sim}49.9%$) in regard to self development as a specialist, affection for there job, an association activity, service to the community, high intelligence level and direct given patient nursing service. It also rated low as a recommendable job, independently nursing accomplishment, social position. 2. The nurses, patients and there protectors expressed more positive opinions than doctors, medical engineers, office workers about the image of the nurse(F=18.80, p=.00). This fact indicates that the former group evaluated the image similarly contrary to lowness of the latter. 3. In the study on what influenced upon the image, it defines to 79.8% by direct contact in the hospital or acquaintance with nurses, and 16.3% by mass media. 67.3% answered that they saw the image in a new light through hospitalization, which suggests an important source for the image management originates from caring for the quality of nursing service. Considering the evaluation of the image above, we need strategies to lead a unique professional knowledge and technological development, insurance of professional self-determination, high social position, participation in group activities, dedication to lifetime job, in order that nursing comes to expand as a professional occupation. Also, as for generating more positive images, we must take the quality of nursing service into account and offer and monitor correct information about the expanded role and function of the nurse continuously so that mass media reflect a more accurate image of nurses in general.

  • PDF

빙축열냉방시스템의 운전효율에 관한 조사연구 (Study and Survey of Operating Efficiency with Cool Storage System)

  • 손학식;심창호;김강현;김재철
    • 에너지공학
    • /
    • 제11권1호
    • /
    • pp.1-9
    • /
    • 2002
  • 우리나라에 보급된 축냉시스템 이용효율 향상과 전력사용 합리화 방안을 제시함으로써 빙축열 시스템의 보급활성화를 통한 하절기 피크부하 경감에 기여코자 빙축열 설비의 성능시험을 실시한 결과 COP주간 3.8, 축열 3.0대비 30% 이상 성능이 감퇴한 주간 2.6∼3.4, 축열 2.1∼3.0정도로 냉동기가 가동되고 있으며, 축열율은 15개 건물 중 3개 건물(21.4%)만이 축열능력 대비 40% 이상의 축열을 실시하고 있는 것으로 분석되었다. 이처럼 운전성능 감퇴를 개선하기 위하여는 축냉(빙축열)설비 운전시 빈번히 발생하는 3-Way 밸브오동작, 냉각능력 감소, 팽창밸브 동작 부적절, 운전모드별 제어설정 오류 등에 의한 축냉능력 감퇴현상을 시정하고, 냉동기의 브라인배관 By-pass, Ice Slurry system운전모드별 배관분리, 냉온수펌프의 회전수제어 등의 배관계통 개선검토가 필요하며, 축냉(비축열) 시스템특징 별로는 Ice on Coil system은 냉방부하 확장성에 제약, Ice Ball system은 축열조의 수밀유지, Ice lens system의 제빙운전시 COP 저하, Ice Slurry system은 주간 운전시 저온운전에 따른 낮은 COP, Ice Harvest system은 Hot Gas 탈빙으로 동력손실증가 등에 대한 개선이 향후 축냉(빙축열)시스템의 운전성능 향상을 위해 필요한 것으로 도출되었다.

덮밥류 편의식에 대한 효과적인 소비자 조사 기법 비교연구 (Investigating the Efficiency of Various Consumer-acceptance Testing Methods while Developing a Ready-to-eat Meal)

  • 신원선;김지나;김경미;박진희;정진아;정서진
    • 한국식품조리과학회지
    • /
    • 제24권6호
    • /
    • pp.763-770
    • /
    • 2008
  • 전반적으로 모든 소비자 군에서 카레덮밥을 가장 선호 하였으나 불고기덮밥은 20대 남자 소비자가, 해물덮밥의 경우 30대 여자 소비자가 선호하는 것으로 나타나 소비자 군에 따라 수용도의 차이를 보였다. 특히 곤약잡채와 해물 덮밥에 대한 소비자 평가는 연령에 따라 상이한 것으로 분석되었다. 9점 기호척도와 BWS의 결과가 유사하였으나 BWS의 경우 시료간의 선호도 차이를 더 확연히 나타냈다. 주관식 응답 설문 기법은 정량화하기는 어려우나 구체적인 개선 방안을 제시하기도 하여 의사 결정의 자료로 사용하기 보다는 제품의 개선 시 개선 방향에 대한 참고 자료로 유용할 것이라 판단된다.

Digital Radiography System에서 X선 광자 검출 방식에 따른 선량 및 화질 특성에 관한 연구 (A Study on Dose and Image Quality according to X-ray Photon Detection Method in Digital Radiography System)

  • 홍선숙;김호철
    • 전자공학회논문지
    • /
    • 제50권12호
    • /
    • pp.247-253
    • /
    • 2013
  • 본 연구의 목적은 Direct DR(Digital Radiography), Indirect DR, I.I(Image Intensifier) DR에서 X선 광자 검출 방식에 따른 선량측정 및 획득된 영상을 정량적이고 객관적인 측정을 통해 DR System을 비교 평가 하는 것이다. Rando phantom을 사용하여 입사표면선량을 측정하였으며, 측정된 입사표면선량 값을 통해 PCXMC 프로그램을 사용하여 유효선량과 방사선 조사로 인한 위험을 평가하였다. 21cm 아크릴 phantom을 사용하여 SNR(Signal to Noise Ratio), NPS(Noise Power Spectrum), CNR(Contrast to Noise Ratio)을 측정하였으며, 측정값은 통계학적 분석기법을 사용하여 유의성을 평가하였다. 입사표면선량, 주요장기선량, 유효선량 모두 direct DR이 가장 낮게 측정되었으며, direct DR 선량을 기준으로 I.I type DR은 약 1.3배, indirect DR은 약 2.4배 높은 선량 비율로 측정되었다. 방사선량에 따른 위험도 역시 동일한 비율로 측정되었다. SNR 측정 결과 direct DR측정값을 기준으로 I.I DR은 약 7.25배, indirect DR이 약 1.48배 낮은 비율로 측정되었다. CNR 측정 결과 direct DR 측정값을 기준으로 I.I DR은 약 1.16배 높고, indirect DR이 약 0.87배 낮은 비율로 측정되었다. 따라서 a-selenium 검출소자를 사용하여 X선 광자를 검출하는 방식인 direct DR은 적은 선량으로 우수한 화질의 영상을 구현함으로써 선량에 민감한 소아나 생식선이 포함된 검사 등에 유용할 것으로 사료된다. 또한 많은 진단 정보를 위한 영상 평가가 요구되는 경우에는 indirect DR이 유용할 것으로 판단된다.

Development of Life Test Equipment with Real Time Monitoring System for Butterfly Valves

  • Lee, Gi-Chun;Choi, Byung-Oh;Lee, Young-Bum;Park, Jong-Won;Nam, Tae-Yeon;Song, Keun-Won
    • International Journal of Fluid Machinery and Systems
    • /
    • 제10권1호
    • /
    • pp.40-46
    • /
    • 2017
  • Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

국가 경쟁력 강화를 위한 중학교 영재 학생들의 과학, 수학, 기술 및 공학에 대한 인식 조사 (A Study on the Science Gifted Students Awareness of Science, Mathematics and Technology/Engineering to Enhance National Competitive Power)

  • 박경숙;이효녕;전재돈
    • 영재교육연구
    • /
    • 제25권3호
    • /
    • pp.363-380
    • /
    • 2015
  • 우리나라의 영재 교육 기관에서는 우수한 인재 양성과 이공 계열 기피로 인해 발생한 이공계 위기를 해결하기 위해 융합인재교육(STEAM)을 포함하여 다양한 융합형 교육을 시행하고 있다. 이 연구의 목적은 융합형 교육을 시행하고 있는 대학 부설 과학영재교육원 소속 영재 학생들의 과학, 수학 및 기술/공학 영역에 대한 인식을 조사하는 것이다. 연구 대상은 영재교육원 소속 중학교 영재 학생 86명이며, 3개 영역의 97문항으로 구성된 검사지를 활용하여 자료를 수집하였다. 연구 결과를 정리하면 다음과 같다. 첫째, 중학교 영재 학생들은 수학이나 기술/공학보다 과학을 흥미롭게 생각하고 있었으며, 둘째, 진로 선택에서도 과학 영역이 높게 나타났다. 셋째, 과학자는 상상력이 풍부하고 재미있지만, 정확하지 않고 배려심이 부족한 직업이라고 생각하고 있었다. 수학자는 다른 직업에 비해서 영리하다고 생각하였으며, 공학자는 부지런한 직업이라고 생각하고 있었다. 넷째, 흥미와 진로 선택의 상관관계를 분석한 결과 과학과 수학 및 기술/공학은 서로 상관관계가 높게 나타났다. 이러한 결과를 토대로 영재 교육에서 융합형 영재 교육의 강화 및 체계적인 진로 교육 확립의 필요성과 수학 및 기술/공학의 상관관계에 대한 체계적인 연구의 필요성을 제언하였다.

감성평가를 이용한 선교알람관리시스템의 청각아이콘 평가 (Selection of Auditory Icons in Ship Bridge Alarm Management System Using the Sensibility Evaluation)

  • 오승빈;장준혁;박진형;김홍태
    • 한국항해항만학회지
    • /
    • 제37권4호
    • /
    • pp.401-407
    • /
    • 2013
  • 선박 기술 발전에 따라 다양한 장비가 개발되고 있지만 인적요인에 의한 해양사고는 여전히 지속적으로 발생하고 있다. 이러한 상황에서 인적요인에 의한 사고 감소를 위하여 선교 내 항해장비의 인간공학적 설계가 많은 관심의 대상이 되고 있다. 선교에는 항해 및 통신장비로부터 나오는 음향 신호 등 항해사에게 정보를 전달하기 위한 다양한 청각 신호들이 존재한다. 하지만 이러한 청각 신호, 청각 경고음에 대한 인간의 인지능력에 관한 연구는 미흡한 실정이다. 청각 경고음은 크게 음성(speech), 함축적 소리(abstract sound), 청각 아이콘(auditory icon)으로 구분 할 수 있다. 본 연구에서는 청각 경고음 중 청각아이콘을 활용하여 5가지의 경보상황(엔진, 화재, 조타, 전기, 충돌)에서 청각아이콘에 대한 감성평가를 통해 각 상황에 적합한 청각아이콘을 선별하였다. 5가지 경보상황 중 뚜렷한 경향이 나타난 2가지 경보상황(엔진, 충돌)에 대하여 분석을 하였다. 본 연구 결과는 선교 내 청각표시장치와 통합선교알람관리시스템을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

선박용 저속디젤엔진 적용을 위한 PM-NOx 동시저감 배출저감설비 해상실증 연구 (Study on the On-Board Test of After-Treatment Systems to Reduce PM-NOx in Low-Speed Marine Diesel Engine)

  • 고동균;정석영;김인섭;안계원;남연우
    • 해양환경안전학회지
    • /
    • 제29권5호
    • /
    • pp.497-504
    • /
    • 2023
  • 본 연구에서는 소형선박용 중·고속 디젤엔진에 적용하여 연구 중인 SCR+DPF 기술을 저속엔진이 설치된 선박에 탑재하여 해상 실증 시험을 수행하였다. 대상 선박(총 톤수 2,881 톤, 정격출력 1,470kW@240rpm ×1)은 국내 연해를 운항하는 일반화물선으로 배출저감설비의 선박 탑재를 위해 도면 개발, 승인 및 선박 임시검사를 수행하였다. 저감성능 확인을 위해서 가스상물질 측정장비는 NOx technical code 및 ISO-8178의 분석방법을 준용하는 장비를 사용하였으며, 입자상물질 측정장비는 국제해사기구(IMO)에서 논의하고 있는 블랙카본 측정 방법 중 하나인 스모크미터를 사용하였다. 시험은 황 함유량 따라 MGO(0.043%), LSFO(0.42%) 2종의 연료를 사용하였으며 실제 운항하는 엔진회전수(130, 160 및 180 rpm)를 고려하여 시험 조건을 설정하였다. 시험 조건에 따라 배출저감설비의 전·후단에서 가스상 및 입자상(매연) 물질을 측정하여 배출저감설비의 저감효율을 확인하였으며 모든 시험 조건에서 NOx의 경우 90% 이상, 입자상물질(매연)의 경우 95% 이상의 저감효율을 확인하였고 엔진 성능의 영향을 줄 수 있는 배기가스 압력은 허용배압 기준인 50mbar 이하를 만족하였다. 본 연구를 통해 해상실증 연구의 중요성과 중소형 저속엔진 선박의 질소산화물 및 입자상물질의 동시 저감을 위한 대응 기술로 SCR+DPF 설비 적용 가능성을 확인할 수 있었다.

토출압력(吐出壓力) 및 호오스길이가 도달성(到達性)에 미치는 영향(影響)에 관(關)한 연구(硏究) (The Effect of Pressure and Hose Length on the Travelling Distance of Particles in Power Sprayer)

  • 권순홍;최규홍
    • Journal of Biosystems Engineering
    • /
    • 제7권2호
    • /
    • pp.30-35
    • /
    • 1983
  • 동력분무기(動力噴霧機)의 능률적(能率的)인 방제작업(防除作業)을 실시(實施)하기 위하여 호오스 길이 및 토출압력별(吐出壓力別)로 도달성(到達性)에 영향(影響)을 미치는 제인자(諸因子)를 구명(究明)하고자 균등분포율(均等分布率) 10%이상(以上)의 최대도달거리(最大到達距離), 균등분포율(均等分布率) 50%이상(以上)의 유효도달거리, 균등분포율(均等分布率)에 의한 최다낙하량분포중심위치(最多落下量分布中心位置)및 분무입자(噴霧粒子), 압력(壓力)의 변화등(變化等)을 측정(側定)하여 분석(分析)한 결과(結果)를 종합(綜合)하면 다음과 같다. 1. 분무(噴霧)호오스의 길이가 증가(增加)함에 따라 관마찰(管摩擦)에 의한 손실(損失)로 최다낙하량분포중심위치(最多落下量分布中心位置)가 100m 길이에서 0.5m 짧아지는 경향을 보였고, 최대도달거리(最大到達距離)는 100m 길이에서 13mm 호오스가 0.5m, 8.5mm 호오스가 1.0m, 유효도달거리는 각각(各各) 0.5m 감소(減所)하였다. 2. 상용압력(常用壓力)(28kg/$cm^2$)하(下)에서 분무(噴霧)호오스의 길이를 최소(最小)로 하더라도 유효도달거리는 14m이상(以上) 초과(超過)하기 어려울 것으로 판단(判斷)되며, 13mm 호오스가 8.5mm 호오스에 비(比)하여 1.0m정도(程度) 도달거리(到達距離)가 증가(增加)하였다. 3. 13mm 호오스에서는 토출압력(吐出壓力)이 8kg/$cm^2$ 상승(上昇)함에 따라 최다낙하량분포중심위치(最多落下量分布中心位置)가 0.5m(1kg/$cm^2$당(當) 약(約) 0.06m) 연장(延長)되었고 최대도달거리(最大到達距離)는 2.0m, 유효도달거리는 0.5m 증가(增加)하였다. 또 8.5mm 호오스에 있어서는 토출압력(吐出壓力) 변화(變化)가 도달성(到達性)에 거의 영향(影響)을 미치지 않았다. 4. 분무(噴霧)호오스 길이의 감소(減少) 및 토출압력(吐出壓力)의 증가(增加)가 분무입자(噴霧粒子)의 미립화효과에 크게 기여(寄與)하고, 분무입경(噴霧粒徑)은 분무압력(噴霧壓力)과 호오스 내경(內徑)의 크기에 상호관련성(相互關聯性)이 있는 것으로 생각된다. 5. 토출압력(吐出壓力) 25~33kg/$cm^2$에 대(對)한 분무(噴霧)호오스 끝에서의 압력강하(壓力降下)는 13mm 호오스가 100m 길이에서 3~7kg/$cm^2$로 10m 길이당(當) 2%정도(程度)의 비율(比率)로 압력(壓力)이 강하(降下)하였다.

  • PDF