• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.43-50
• /
• 2021

Pump-cap is a device for discharging the contents stored inside a container to the outside of the container by a simple operation by a certain amount. In particular, in recent years, as the number of cosmetic products made of functional materials has rapidly increased, the development of convenient containers for functional materials is being actively conducted. Among these, there are a growing number of products that show their efficacy only by mixing two components, so the development of a dual pump cap container is necessary. However, the conventional dual pump cap container has a problem in that it is difficult to implement a quantitative discharge as solutions having different viscosities are used. Therefore, in this study, a discharge port of a dual pump cap that can apply an optimal ratio was designed by analyzing the discharge amount of two components with different viscosities through computational fluid dynamics. Since the discharge amount is affected by the size of the discharge port, the higher the viscosity of the solution, the larger the discharge port should be set. Conversely, the lower the viscosity, the smaller the discharge port should be. Through this, it is possible to dispense a fixed amount of a heterogeneous solution by one pumping, and it is determined that the user's convenience will increase.

• Journal of Korean Port Research
• /
• v.9 no.2
• /
• pp.39-49
• /
• 1995

Recently, the traffic volume has been greatly increased partly because of high growth rate of domestic and world economy, and partly because of increased transhipment demand resulting from the destruction of Kobe port by earthqwake early this year. So, container facilities in Pusan Port are under serious congestion. The congestion costs in connection with container traffic in Pusan Port is estimated to be 29.3 billion won in 1994. In 1995 the situation is still worsening. PECT has continued to grow annually by 35% in cargo handling exceeding more than 31% of the total container volumes handled in Korea. The BOR of container berths in PECT in 1994 is 75% reflecting extreme congestion in container traffic. The reason for such serious congestion in PECT is the shortage of container handling facilities in comparison with ever-increasing cargo traffic. In order to solve the provisional problem, the shortage of handling capacity, a model developed to optimize the operation of PECT is described and demonstrated. The model minimizes total port costs, including the costs of dock labour, facilities and equipment, ship, containers, and cargo. The object of this study is, through the model results, mainly to determine the optimal combination of berths and cranes under various circumstances and to show that total costs per ship or unit of cargo served can be reduced by increasing the number of cranes per berth and berth utilization above present levels. Eventually, the results obtained with this model in PECT suggest that increase to 3 in the number of cranes per existing berth could reduce the need for major investments in berths and even reduce operating costs.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.3
• /
• pp.167-173
• /
• 2010

Repeated oral administration of hydrochlorothiazide, a loop diuretic, due to transient high blood levels, may cause adverse effects such as gastric disturbance, nausea, high blood sugar, and hyper lipidemia. Transdermal administration could avoid some of these systemic side effects and gastric disorders. We have developed a matrix using ethylene-vinyl acetate (EVA), a heat-processible and flexible material, for transdermal delivery of hydrochlorothiazide. Drug solubility was highest at 40% PEG-400 volume fraction. Drug release increased as concentration increased with a linear relationship between the release rate and the square root of loading dose. Increasing temperature increased drug release from the EVA matrix. The activation energy, measured from the slope of log P versus 1000/T, was 11.9 kcal/mol for a 2.5% loading dose from EVA matrix. Diethyl phthalate had the highest plasticizing effects on the release of hydrochlorothiazide. To increase the skin permeation of hydrochlorothiazide from the EVA matrix, enhancers such as the saturated fatty acids, the unsaturated fatty acids, and the non-ionic surfactants were added to the EVA matrix, and skin permeation was evaluated using a modified Keshary-Chien diffusion cell fitted with intact excised rat skin. Polyoxyethylene 23-lauryl ether showed the highest enhancing effects. In conclusion, transdermal delivery of hydrochlorothiazide could be improved from an EVA matrix containing plasticizer and permeation enhancer.

• The Korean Journal of Pain
• /
• v.23 no.2
• /
• pp.142-146
• /
• 2010

Background: Stellate ganglion block (SGB) is known to increase blood flow to the innervations area of the stellate ganglion. Near infrared spectroscopy reflects an increased blood volume and allows continuous, non-invasive, and bedside monitoring of regional cerebral oxygen saturation ($rSO_2$). We investigated the influence of SGB on bilateral cerebral oxygenation using a near infrared spectroscopy. Methods: SGB was performed on 30 patients with 1% lidocaine 10 ml using a paratracheal technique at the C6 level and confirmed by the presence of Horner's syndrome. The blood pressure (BP), heart rate (HR) and rSO2 were measured before SGB and 5, 10, 15 and 20 minutes after SGB. Tympanic temperature of each ear was measured prior to SGB and 20 minutes after SGB. Results: The increments of the $rSO_2$ on the block side from the baseline were statistically significant at 5, 10, 15 and 20 minutes. The $rSO_2$ on the non-block side compared with the baseline, however, decreased at 15 and 20 minutes. The difference between the block and the non-block sides was significant at 15 and 20 minutes. The BP at 10, 15 and 20 minutes was increased and the HR was increased at 10 and 15 minutes. Conclusions: We observed an increment of the $rSO_2$ on the block side from the baseline; however, the $rSO_2$ on the non-block side decreased.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.800-808
• /
• 2005

It is required to propose an alternatives for appropriate sludge treatment owing to persistent construction of sewage treatment plant and increase of sewage sludge quantity. In order to treat sludge more efficiently, the methods which reduce the cost of sludge treatment have been studied such as sludge reduction and conditioning. Especially ozone treatment reduces solid quantity and improves separation of solid-liquid at the same time. Therefore ozone treatment have a positive effect on reduction and stabilization of sludge. So, this study applied ozone to sewage sludge and induced cell destruction of sludge. By comparing with the correlation between thickening and dewatering, and evaluating moisture content and solubilization of cake, this study verificates the effect of process improvement for ozone pre-treatment. In J-STP case, according to ozone dose solid flux increased about 12 times from $1kg/m^2{\cdot}h$ to $12kg/m^2{\cdot}h$. Also this plant were capable to shorten thickening time from 40 minutes to 6~7 minutes. Thus it is expected to reduce volume and retention time of thickener. On pH effect factor, dewatering at pH4 was more than at pH11, $3.05{\times}10^{11}$ and $3.82{\times}10^{11}(m/kg)$. But effect of pH was analogous to ozone, $2.81{\times}10^{11}(m/kg)$. The effect of pH on thickening was similar to law sludge, $0.68(kg/m^2{\cdot}h)$, and the effect of ozone injection on thickening was the biggest, $3.45(kg/m^2{\cdot}h)$. The COD solubilization rate improved from about 5 to 30%. So it is judged that we are able to utilize most solubilized sludge to another sewage treatment plants.

• Journal of Gastric Cancer
• /
• v.20 no.4
• /
• pp.376-384
• /
• 2020

Purpose: The role of prophylactic abdominal drainage in total gastrectomy is not well-established. This study aimed to evaluate the efficacy of abdominal drainage in the prevention and management of major intra-abdominal complications after total gastrectomy for gastric carcinoma. Materials and Methods: We retrospectively reviewed the data of 499 patients who underwent total gastrectomy for gastric carcinoma in a high-volume institution. The patients were divided into drainage and non-drainage groups and compared for the development and management of major intra-abdominal complications, including anastomotic leak, abdominal bleeding, abdominal infection, and pancreatic fistulas. Results: The drainage group included 388 patients and the non-drainage group included 111 patients. The 2 groups showed no significant differences in clinicopathological characteristics or operative procedures, except for more frequent D2 lymphadenectomies in the drainage group. After surgery, the overall morbidity (drainage group vs. non-drainage group: 24.7% vs. 28.8%, P=0.385) and incidence of major intra-abdominal complications (6.4% vs. 6.3%, P=0.959) did not significantly differ between the two groups. The non-drainage group showed no significant increase in the incidence rate of major intra-abdominal complications in the subgroups divided by age, sex, comorbidity, operative approach, body mass index, extent of lymphadenectomy, and pathological stage. Abdominal drainage had no significant impact on early diagnosis, secondary intervention or reoperation, or recovery from major intra-abdominal complications. Conclusions: Prophylactic abdominal drainage showed little demonstrable benefit in the prevention and management of major intra-abdominal complications of total gastrectomy for gastric carcinoma.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.527-537
• /
• 2017

Objectives: The purpose of this study was to examine the practice of oral hygiene behaviors and oral health status of long-term care facility residents and to analyze the factors related to salivary hemoglobin level which can predict active periodontal disease. Methods: From 30th October 2015 to 7th January 2016, a questionnaire was provided to 63 participants and their dental plaque and saliva samples were collected to assess the levels of salivary hemoglobin and dental plaque acidogenicity. In order to analyze the factors related to salivary hemoglobin level, multiple linear regression analysis was performed. Results: Toothbrushing was most frequently performed by the participants themselves (98.4%) and toothbrushing was performed after eating breakfast (81.3%). 68.8% of participants reported brushing their tongue. 35.9% of participants perceived having bad teeth, and 87.5% had high dental caries activity. The percentages of participants with hyposalivation and ${\geq}0.20{\mu}g/ml$ salivary hemoglobin level were 45.3% and 59.4%, respectively. The salivary hemoglobin level was significantly higher in the group in which stimulated salivary flow rate was ${\leq}0.70ml/min$, dental plaque acidogenicity was superior, and perceived having bad teeth (p<0.05). There was also a tendency for the salivary hemoglobin level to increase with age (p<0.05). Conclusions: Oral health status of the long-term care facility residents was still not improved, and the characteristics of salivary volume and dental plaque were important factors affecting salivary hemoglobin level. Therefore, it is necessary to operate an oral hygiene intervention program by oral health professionals in such facilities in order to provide residents with effective oral care aligned with their respective needs. Furthermore, it is necessary for caregivers to complete mandatory oral health education to improve the oral hygiene status of the long-term care facility residents.

• Toxicological Research
• /
• v.20 no.2
• /
• pp.159-166
• /
• 2004

Safety pharmacological properties of CJ-11555, an anti-cirrhotic agent, were investigated in experimental animals and in vitro test system. CJ-11555 had no effects on normal body temperature in rats, motor coordination, chemoshock induced by pentetrazol, electric shock induced by electric shocker and writhing syndromes in mice at dose levels of 100, 300 and 1,000 mg/kg. CJ-11555 inhibited intestinal activity and prolonged hexobarbital-induced sleeping time in mice at the dose level of 1,000 mg/kg. CJ-11555 affected on general activity and behaviour tests in SD rats, such as lacrimation, ptosis, piloerection, decreased body tone, abnormal dispersion within the cage, diarrhoea, red colored faeces, slight hypothermia and decreased grooming, at the dose level of 1,000 mg/kg in rats. CJ-11555 was effected on cardiovascular and respiratory system in anesthetized beagle dogs, such as tachycardia, increase of mean blood pressure and decrease of PR interval, decrease of respiratory rate and minute volume, at dose levels of 10 and 30 mg/kg. However, these effects were also observed in vehicle treated anesthetized beagle dogs. In in vitro experiments, CJ-11555 inhibited agonists (histamine, acetyl-choline or $BaCl_2$) induced contraction of isolated guinea-pig at the concentration of 30$\times$$10^6$ M. CJ-11555 was weekly inhibited hERG channel current at concentrations of 10 and 30$\times$$10^6$ M, and $IC_{50}$ was estimated to be higher than 30${\times}$$10^6$M. Based on these results, it was concluded that CJ-11555 affected on cardiovascular and respiratory system, general activity and behaviour and hexobarbital-induced sleeping time at the dose level of 1,000 mg/kg and contraction of the smooth muscle and hERG channel current at the concentration of 30$\times$$10^6$ M.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.58-64
• /
• 2013

The following results were obtained, microstructures and tensile properties in arc brazed joints of DP(dual phase) steel using Cu-5.3wt%Sn insert metal was investigated as function of brazing current. 1) The Fusion Zone was composed of ${\alpha}Fe+{\gamma}Cu$ and Cu23Sn2. The reason for the formation of these solid solutions. Despite, Fe & Cu were impossible to solid solution at room temperature. It's melting & reaction to something of insert metal & Base Metal (DP Steel) by Arc. Brazing Process has faster cooling rate then Cast Process, Supersaturated solid solution at room temperature. 2) The increase Hardness of Fusion Zone was directly proportional to the rise of welding current. Because, ${\alpha}Fe+{\gamma}Cu$ phase (higher hardness than the Cu23Sn2.(104.1Hv < 271.9Hv)) Volume fraction was Growth, due to increasing the amount of base metal melting by High current. 3) The results of tensile shear test by Brazing, All specimens happen to fracture in Fusion Zone. On the other hand, when Brazing Current increasing tend to rise tensile load. but it was very small, about 26-30% of the base metal. 4) The result of fracture analysis, The crack initiate at Triple Point for meet to Upper B.M/Under B.M/Fusion Zone. This Crack propagated to Fusion zone. So ruptured by tensile strength. The Reason to in the fusion zone fracture, Fusion zone by Brazing of hardness (strength) was very lower then the base metal (DP steel). In addition the Fusion Zone's thickness in triple point was thin than the base metal's thickness in triple point.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.528-532
• /
• 2009

The size and shape of free volume (FV) holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, a segmented, thermo-sensitive polyurethane (TSPU) membrane with functional gate, i.e., the ability to sense and respond to external thermo-stimuli, was synthesized. This smart membrane exhibited close-open characteristics to the size of the FV hole and water vapor permeation and thus can be used as smart food packaging materials. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), positron annihilation lifetimes (PAL) and water vapor permeability (WVP) were used to evaluate how the morphological structure of TSPU and the temperature influence the FV holes size. In DSC and DMA studies, TSPU with a crystalline transition reversible phase showed an obvious phase-separated structure and a phase transition temperature at $53^{\circ}C$ (defined as the switch temperature and used as a functional gate). Moreover, the switch temperature ($T_s$) and the thermal-sensitivity of TSPU remained available after two or three thermal cyclic processes. The PAL study indicated that the FV hole size of TSPU is closely related to the $T_s$. When the temperature varied cyclically from $T_s-10{\circ}C$ to $T_s+10^{\circ}C$, the average radius (R) of the FV holes of the TSPU membrane also shifted cyclically from 0.23 to 0.467 nm, exhibiting an "open-close" feature. As a result, the WVP of the TSPU membrane also shifted cyclically from 4.30 to $8.58\;kg/m^2{\cdot}d$, which produced an "increase-decrease" response to the thermo-stimuli. This phase transition accompanying significant changes in the FV hole size and WVP can be used to develop "smart materials" with functional gates and controllable water vapor permeation, which support the possible applications of TSPU for food packaging.