• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• 통상정보연구
• /
• 제7권3호
• /
• pp.269-286
• /
• 2005

The exchange rate volatility has been increased since the time when the floating exchange rate system was introduced in Korea. As a result, the increase of the exchange rate volatility raised the risk in international trades in Korea. The purpose of this study in to study the feature of exchange rate volatility and the main sources of its increase and to confirm whether the exchange rate volatility influence export volume and price of Korea. In the first place, I measured exchange rate volatility with two methods. The one is descriptive statistic method such as the width of daily exchange rate fluctuation and the rate of exchange rate devaluation. The other is the time varying conditional variance of exchange rate. Then, I studied the sources of exchange rate volatility. In the second place, I defined the exchange rate volatility as the time varying conditional variance and estimated it by using elastic a approach model which shows exchange rate is affected by itself and its conditional variance, I estimated its effects on export volumes and prices of electric home appliances, information & communication equal and semi-conductor. The result of this study is as follows. With presumed result EU and Korea because is not the goods which is to substantial competition relationship, The effect where the relative value change of presumed result expression anger and the dollar of import and export function goes mad to the import and export of Korea the income compared to is to export and it is appearing a lot. The EU goods is sold more expensively the Korean goods than from about length being caused by American market of the dollar and the balance of trade of Korea is visible like being visible the improvement of single breadth. Because the relationship of competition is weak but substantially there is to a short term and expression - the effect where the dollar rate fluctuation is big in Korean trade there is a possibility of saying that widely known it is not.

• Applied Biological Chemistry
• /
• 제26권1호
• /
• pp.47-52
• /
• 1983

세도하다까의 도정수율별 곡립분포(穀粒分布)와 수화중(水和中)의 부피 및 곡립경도변화(穀粒硬度變化)를 온도별(溫度別)로 조사하여 속도론적(速度論的)으로 해석(解析)하였다. 보리곡립(穀粒)은 도정됨에 따라 장경(長徑)과 단경(短徑)이 모두 직선적(直線的)으로 감소하였으며 감소율(減少率)은 장경(長徑)의 경우가 컸다. 도정한 보리의 수화시(水和時) 부피증가는 수화시간의 멱수(冪數)로 표시될 수 있었으며 도정하지 않은 보리의 경우는 불연속적으로 증가하였다. 수화중(水和中) 보리곡립(穀粒)의 경도변화(硬度變化)는 1차반응에 속하였으며 반응속도상수는 도정수율이 감소할수록 증가하였다. 온도별 반응속도상수는 Arrhenius방정식에 의거하여 변화하였으며 활성화에너지는 도정한 보리의 경우 $5.1{\sim}7.8Kcal/mole$, 도정하지 않은 보리의 경우 13.3Kcal/mole이었다.

• 대한한방소아과학회지
• /
• 제14권2호
• /
• pp.1-32
• /
• 2000

It has long been known that SOAT is effective for sudden palpitation occurring unexpectedly in Oriental Medicine. However, effect of SOAT on the isolated heart has not been studied yet. The purpose of this study is to investigate the effect of SOAT on hemodynamics and ECG of isolated rat hearts induced by electrical stimulation using Langendorff perfusion apparatus for nonworking heart. SOAT extract was manufactured by water-alcohol precipitated method. Sprague-Dawley rats weighting $120{\sim}150g$ were used for the experiments, Subject animals were divided into four groups, which are consisted of 1) control(Group orally administered by normal saline 1ml for 14days), 2) sample A(Group orally administered by SOAT extract 1ml for 14days), 3) sample C(Group injected by SOAT extract 0.5ml after stimulation, 4) sample C(Group injected by SOAT extract 1ml after stimulation. To evluate the effects of SOAT on hemodynamics and ECG of isolated rat heart induced by stimulation, heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume and ECG were measured using Langendorff apparatus in both stimulation mode(5 volts, 450 beats/min) and arrythmic mode(5 volts, 420 beats/min including 60 beats/min) The results obtained are as follows : 1. After receiving stressful electrical stimuli, isolated heart showed the heart rate, left ventricular pressure, systolic power, diastolic power, coronary artery perfusion volume were all decreased temporarily, but perfusion continued longer recovery to the control state appeared. However, the coronary artery perfusion volume diminished continuously. 2. The heart rates did not change significantly with both stimulation mode and arrhythmic mode, among experimental groups. 3. The left ventricular pressure showed with both stimulation mode and arrhythmic mode, the significant changes(p<0.05) especially in the injection sample group. In case of stimulation mode, low concentration injection group(0.5ml) was more significantly increased rather than high concentration group(1ml) and in case of arrhythmic mode, high density group(1ml) was so increased than the other(0.5ml). 4. For the systolic power and diastolic power, no significant changes were noticed in the stimulation mode, but in the arrhythmic mode of injection sample groups, significant change(p<0.05) was noticed in both systolic power and diastolic power. Specially the high concentration group(1ml) showed more significant increase than the low concentration group. 5. For the coronary artery perfusion volume, no significant change difference among sample groups was observed in both the stimulation mode and the arrhythmic mode. 6. For the ECG recordings, arrhythmia was induced by electrical stimulus of arrythmia mode and after the stimulus was removed, irregular wave appeared temporarily, but as perpusion continued, recovery to the control state was abtained like the stimulation mode. According to the above results, SOAT significantly changed the hemodynamic data from the electrically stressed, isolated hearts of connected Langendorff perfusion apparatus and we propose SOAT has the direct effects on the muscular function of heart.

• 한국환경복원기술학회지
• /
• 제26권3호
• /
• pp.19-28
• /
• 2023

The purpose of this study is to estimate carbon dioxide emissions from soil microbial respiration by forest type of Sobaeksan National Park. As a result of estimating the annual soil microbiological respiration volume by forest type in Sobaeksan National Park, broad-leaved forests, coniferous forest, artificial forests were similar to around 19.5 CO₂-ton/ha/yr. In the case of coniferous forests in sub-alpine and grassland near Birobong Peak, 12.2 CO₂-ton/ha/yr and 8.1 CO₂-ton/ha/yr, respectively, were lower than general forest areas. And as a result of analyzing the changes in soil microbiological respiration rate according to forest type in Sobaeksan National Park, the soil microbiological respiration rate in coniferous forests, broad-leaved forests, artificial forests, and sub-alpine areas was the highest in the July survey in summer and the lowest in November in late autumn. The change in soil microbial respiratory volume according to the measurement time in Sobaeksan National Park was the highest between 12:00 and 16:00, when the soil temperature was generally the highest among the days. It is known that the soil temperature is relatively low and the amount of soil microbial respiration decreases during winter, and the change in respiratory volume over the measurement time during the day was the smallest in November, when the amount of soil microbial respiration was relatively smaller than the May-September survey. However, this study has limitations in revealing the causal relationship of various environmental factors that affect the soil microbial respiration. Therefore, it is suggested that long-term research and investigation of various factors affecting soil respiration are needed to understand the carbon cycle of forest ecosystems.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.186-193
• /
• 2001

In the high pressure state, the leakage flow rate of hydraulics is one of serious problems and the great reason to decrease the volume efficiency. In this paper, I tried to clarify tribology characteristics for the slipper hydrostatic bearing in swash plate type axial piston pumps and motors by means of experiment . I measured the leakage flow rate between swash plate and piston shoe with change the supply pressure and oil temperature at a swash plate angle of 0。 . And I also investigated the slipper pocket pressure and calculated oil film thickness for theoretical method. So. 1 have analyzed the tribology characteristics of hydrostatic bearing for leakage flow rate and oil film thickness with oil temperature and supply pressure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권1호
• /
• pp.47-52
• /
• 1990

During prolonged exposure to the sun for 8 h each day for 10 days in which the highest ambient temperature around 14:00 h was $39^{\circ}C$, buffaloes exposed to the sun without shade increased the turnover of body water by 35% and 76% on day 5 and day 10 of exposure respectively. The total body water markedly decreased on day five and this amount was maintained thereafter. Plasma and blood volumes did not change significantly on day five but markedly decreased on day 10. Packed cell volume significantly decreased on day five and day 10 of the exposure period. The reduction of packed cell volume on day 10 coincided with the decrease in total plasma water. On day 10 of the exposure, an increase in the rate of liquid flow from the rumen was noted. It is concluded that on the fifth day of exposure, the increase in the evaporative cooling process was attributed to initial mobilization of water from the intracellular compartment. The reduction of both plasma and cell volumes occurring from day five to day 10 indicated a loss of body water from both intracellular and extracellular compartments.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.114-120
• /
• 2010

Optimization of the turning process has been concentrated on the selection of the optimal cutting parameters, such as cutting speed, feed rate and depth of cut. However, optimization of the cutting parameters does not necessarily guarantee the maximum profit. For the maximization of the profit, parameters other than cutting parameters have to be taken care of. In this study, 8 price-related parameters were considered to maximize the profit of the product. Regression equations obtained from RSM technique to relate the cutting parameters and maximum cutting volume with a given insert were used. The experiments with four combinations of cutting inserts and material were executed to compare the results that made the profit and cutting volume maximized. The results showed that the cutting parameters for volume and profit maximization were totally different. Contrary to our intuition, global optimization was achieved when the number of inserts change was larger than those for volume maximization. It is attributed to the faster cutting velocity, which decreases processing time and increasing the number of tool used and the total tool changing time.

• 대한의용생체공학회:의공학회지
• /
• 제28권4호
• /
• pp.577-584
• /
• 2007

Uroflowmetry is non-invasive and easily performed to diagnose benign prostatic hypertrophy(BPH) frequent in aged men. Weight change during urination is usually measured to estimate the urinary flow rate by a load cell, but sensitive to any impacts against the bottom of the container, leading to unnecessary noise generation. Moreover, load cells are relatively expensive raising the production cost. The present study proposed a new technique, measuring hydraulic pressure on the bottom of the urine container to evaluate the urinary volume. Low cost pressure transducer enabled almost perfectly linear relationship between the urine volume and the hydraulic pressure. During both the simulated and human urination experiments, variance of the pressure signal was more than 50% smaller than the weight signal acquired by a load cell, which demonstrated that the impact noise was decreased to a great degree by pressure compared to weight measurement.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.499-505
• /
• 2004

The objective of this study is to investigate the effect of supercooling repression on the TMA clathrate by adding ethylene glycol. For this purpose, phase change temperature, supercooling, specific heat, latent heat and rate of volume change were measured and evaluated experimentally for heat source temperatures of -6$^{\circ}C$, -7$^{\circ}C$, -8$^{\circ}C$. The results show that supercooling was decreased. Thus the experimental results are expected to be used for the increase of coefficient of performance of low temperature thermal storage system in the building.