• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.258-268
• /
• 2005

A new approach has been adopted to remove the hot particulates from nuclear facilities, KAERI, South Korea, by using the new compact cyclone train, made of steel ness steel, with optional vortex finder length. Flow rate results showed a dramatic change in removal efficiency, performance was changed with the change of exit tube length. The 15 m/s flow rate was found suitable one for new equipment with the 49 mm optimum exit tube length for 76 mm cyclone body diameter. Results shows the removal efficiency for $1\;{\mu}m$ was more than $65\%$ and for $10\;{\mu}m$ was seen ${\~}97\%$. Over 15 m/s flow rate, was not shown much different in removal efficiency. The removal efficiency increased with the flow rate, and pressure drop. Cut size diameter decrease with the inlet flow rate. Cut size diameter found lowest with 49 mm exit tube length and 15 m/s flow rate. For filters the performance decreased with the inlet velocity increased.

• 한국해안·해양공학회논문집
• /
• 제30권3호
• /
• pp.134-141
• /
• 2018

쉬라우드 조류 발전 시스템 상부 두께 변화에 따른 유동장 내 유속 변화 연구를 위해 수치 모의실험을 통하여 분석하였다. 본 연구는 일정한 조류 속도 조건에서 수행하였으며, 같은 조건으로 쉬라우드의 성능 분석을 추가 수행하였다. 상부 높이가 증가할수록 유속 변화율은 점차 증가하는 양상을 보였으며, 일정 높이에서 재차 감소하는 경향을 보였다. 또한, 쉬라우드의 성능 평가를 위해 블레이드를 단독 설치한 경우와 쉬라우드와 결합한 형상을 분석한 결과, 쉬라우드 시스템에 의한 유속 증가로 블레이드의 회전력은 증가하였다. 본 연구를 통해 얻은 구조물의 형상과 유동장 내의 유속 분포에 대한 분석 결과는 효율적인 쉬라우드 조류 발전 시스템 개발에 필요한 자료를 제시할 수 있을 것으로 기대된다.

• 항공우주기술
• /
• 제6권2호
• /
• pp.73-78
• /
• 2007

현재 개발되고 있는 위성용 전자광학시스템의 설계 파라미터를 적용하여 알려진 식에 의해 위성의 운용고도와 자세변화에 따른 전자광학시스템의 GSD 및 라인레이트 변화관계를 살펴보았다. 그리고 고도변화에 따른 적용 가능한 라인레이트와 위성의 지상 스캔율의 차이에 의해 발생할 수 있는 성능변화 요소로서의 MTF에 대한 영향을 검토하였다. 즉 현재 개발이 진행되고 있는 카메라 전자부의 설계 파라미터를 적용하여 조정 가능한 라인레이트의 한계를 알아보고 이에 의한 성능감소 변화를 검토함으로써 현재 개발 진행되는 전자광학시스템의 카메라전자부의 설계요소에 대한 분석을 수행하였다.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

Rifling Force can be described with projectile velocity, gas pressure and rifling angle, etc. Under the same conditions, the character of the rifling angle decisively influences the rifling force. To reduce the harmful effect, locally distinct maximum of rifling force has to be avoided. The optimal design methodology of rifling angle curve had been developed by combined Fourier series and polynomial function. When it was tried newly to design the rifling angle curve, this design trial caused not to produce the lower rifling force than the existing design. Normally, the curve of the rifling angle is designed first, then the rifling force is set according to the rifling angle curve. However during the cause analysis, new design methodology was established to design the ideal rifling force curve before the rifling angle design. With this new methodology, the above optimal design method was analyzed and its limitation was confirmed.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.890-900
• /
• 2016

This paper presents a multiple target tracking system using target feature information. In the proposed system, the state of target is defined as its kinematic as well as feature : the kinematic includes a location and a velocity; the feature contains the image correlation between a prior target and a current measurement. The feature information is used for generating the validation matrix and association probability of joint probabilistic data association (JPDA) algorithm. Through the Kalman filter, the target kinematic is updated. Then the tracking information is cycled by the track management algorithm. The system has been evaluated using the images obtained from Electro-Optics/ InfraRed (EO/IR) sensor. It is verified that the proposed system can reduce the complexity burden of JPDA process and can enhance the track maintenance rate.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.333-342
• /
• 2019

Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.576-585
• /
• 2002

A three-dimensional Lagrangian explicit time-integration finite element code for analyzing the dynamic impact phenomena was developed. It uses four node tetrahedral elements. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, which are frequently observed in high-velocity deformation phenomena, Johnson-Cook model is used as constitutive model. For more accurate and robust contact force computation, the defense node contact algorithm was adopted and implemented. In order to evaluate the performance of the newly developed three-dimensional hydrocode NET3D, numerical simulations of the oblique impact of mild steel plate by mild steel sphere were carried out. Ballistic limit about various oblique angle between 0 degree and 80 degree was estimated through a series of simulations with different initial velocities of sphere. Element eroding by equivalent plastic strain was applied to mild steel spheres and targets. Ballistic limits and fracture characteristics obtained from simulation were compared with experimental results conducted by Finnegan et al. From numerical studies, the following conclusions were reached. (1) Simulations could successfully reproduce the key features observed in experiment such as tensile failure termed "disking"at normal impacts and outwards bending of partially formed plus segments termed "hinge-mode"at oblique impacts. (2) Simulation results fur 60 degrees oblique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is excellent. (3) Agreement with the experimental ballistic limit data, particularly at the high-obliquity impacts, is reasonably good. (4) The simulation result is not very sensitive to eroding condition but slightly influenced by friction coefficient.

• 한국해양학회지:바다
• /
• 제12권4호
• /
• pp.390-399
• /
• 2007

하계 동중국해 북부 대륙붕 해역에서 해수 혼합을 연구하기 위하여 2005년 8월과 2006년 8월에 한국해양연구원 연구선 이어도호를 이용하여 해수 물성 및 난류 관측을 수행하였다. 유속 변형으로부터 산출한 난류운동에너지 소산율은 표층에서 $10^{-7}{\sim}10^{-4}$, 저층에서 $10^{-7}{\sim}10^{-6}$와 수온약층에서 $10^{-7}$ W/kg의 높은 값이 나타났다. 관측 자료는 표층의 경우 바람에 의해 지속적으로 혼합이 이루어짐을 보여주었다. 수온약층 하부에서의 높은 소산율은 내부파의 영향으로 판단된다. 저층의 높은 소산율은 저층의 탁도 분포의 경향과 일치하여 조류에 의한 해저면층 교란의 결과임을 시사해주었다. 바닥에서의 연직확산계수는 낮은 안정도와 높은 난류상태의 복합적인 영향으로 $10^{-3}{\sim}10^{-2}m^2/s$로 높은 값이 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.114-121
• /
• 2003

Water droplet erosion is one of major concerns in the design of modern large fossil steam turbines because it causes serious operational problems such as performance degradation and reduction of service life. A new erosion model has been developed in the present study for the prediction of water droplet erosion of rotor blades operated in wet steam conditions. The major four erosion parameter : impact velocity, impacting droplet flow rate, droplet size and hardness of target are involved in the model so that it can also be used for engineering purpose at the design stage of rotor blades. Comparison of the predicted erosion rate with the measured data obtained from the practical steam turbine operated for more than 90,000 hours shows good agreement.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.537-542
• /
• 1996

In the present work the influence of various physical parameters on the two-phase flow behavior in a self-heated porous medium has been studied using a numerical model, that is, the effects of heat generation rate, of porosity, of particle size, and of system pressure on the dryout process. To analyze the effect of these parameters, the variation of both liquid volumetric fraction and liquid axial velocity is evaluated at the steady state or at the onset of a first boiled-out region. The analysis of computational results indicate that a qualitative tendency exists between the parameters such as heat generation rate, porosity, effective particle diameter and the temporal development of the liquid volumetric fraction field up to dryout. In addition to these parameters, a variation of fluid properties such as phase density, phase viscosity due to a change of system pressure can be used for gaining insight into the nature of two-phase flow behavior up to dryout.