• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2000

This paper describes the effect of specimen size on fatigue crack growth rate for the offshore structural high-tensile-strength steel BS4360 and machine structural steel SM45C. The purpose of the present study is to investigate the effect of stress ratio aspect ratio specimen width and specimen thickness of the fatigue crack growth behavior. Compact tension specimens with a LT orientation for BS4360 and SM45C steels were used, All testing was done at constant stress intensity factor range controlled fatigue crack growth condition. The investigation demonstrates that the fatigue crack growth rate is increased with increasing stress ratio and specimen thickness and is decreased with increasing specimen width. The fatigue crack growth rate is unaffected by aspect ratio until a/W=0.50 but is increased by increasing spect ratio from a/W=0.55.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.103-109
• /
• 2016

The effect of different feeding rate on the growth and survival rate of 3-year-old abalone, Haliotis dicsus hannai were investigated in marine net cage culture. Feeding rate is determined that was fed 5, 10, 15 and 20 percentage to abalone at body weight once daily : 5 daily feeding rate (DFR), 10 DFR, 15 DFR and 20 DFR. After that, it was conducted to reared during thirteen month with two replicates in net cage culture. In the growth performance of reared abalone (initial mean shell length $73.77{\pm}11.27mm$) in net cage culture, that the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rate (SGR) to the shell length and shell breadth, as well as weight gain (WG), daily weight gain (DWG) and specific weight gain (SWG) to body weight of 5 DFR were higher than those of different groups (P < 0.05). Also, survival rate of all feeding rate groups was not significant, but it was showed bellow 30 percents. Therefore, these results is showed that the daily feeding rate for natural feed of 3-year-old abalones reared in net cage culture should be to supply among five to ten percents.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.32-44
• /
• 1983

In case of $K_{Imax}$ < $K_{Iscc}$, the corrosion fatigue of high strength steel in 0.1N $H_{2}$S $O_{4}$ solution and 3.5% salt water is as follows. 1. The fatigue life shortens in order of 3.5% salt water and 0.1N $H_{2}$S $o_{4}$ solution. 2. The fatigue crack growth rate in air is obtained as the following equation. (dc/dN)$_{atr}$=7.23*10$^{-6}$ (.DELTA. K)$^{2.23}$ 3. The corrosion fatigue crack growth rate in environment is divided into three regions, that is, First Region, Second Region and Third Region from the small cyclic stress intensity. 4. The formation rate of the active surface on metal is slower than the mechano-chemical reaction rate in First Region. The crack growth rate depends on time and the cyclic stress intensity and is expressed as the following equation. (dc/dN)$_{I}$=C(/DELTA. K)$^{\delta}$ 5. The formation rate of the active surface is faster than the mechano-chemical reaction rate in Second Region and the synergistic effect by stress and corrosion becomes slow. In case the fatigue load is large, we have the critical crack growth rate which is not related to the cyclic stress intensity. 6. The corrosion crack growth rate by the mechano-chemical reaction is the same in $H_{2}$S $O_{4}$ solution and salt water, so Hydrogen accelerates the crack growth. 7. The environment has no effect on the corrosion fatigue crack growth rate in Third Region. 8. In First Region and Second Region, dimple is observed on the fatigue fracture surface in 0.1N $H_{2}$S $O_{4}$ solution. 9. The striation is observed in any environment as in air in Third Region and its interval approximately coincide with the crack growth rate.ate.e.e.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.275-280
• /
• 1997

We have investigated the deposition characteristics of (Ni0.8Fe0.2)20Ag80 thin films as a function of chamber pressure and nitrogen flow rate with scanning electron microscopy(SEM), atomic force microscopy(AFM), XRD and $\alpha$-step. The deposition rate of these film is decreased with increasing the chamber pressure and the nitrogen flow rate. With raising the chamber pressure, the growth mode of thin film is changed from island growth to columnar one, which is probably due to energy of atom. Contrary, the nitrogen flow rate is raised, growth mode is changed from columnar to island one. According to the XRD patterns, the preferred orientation is inhibited as the nitrogen flow rate is kept above 10 sccm, but that is nearly independent on the chamber pressure. When the chamber pressure decrease or the nitrogen flow rate increase, phase separation into permoally and silver is occured.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.169-179
• /
• 2005

Nucleate boiling experiments on heating surface of constant wall temperature were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition of heating surface and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames per second using a high-speed CCD camera synchronized with the heat flow rate measurements. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous experimental results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later (thermal) respectively. The comparisons showed good agreement in the initial and thermal growth regions. In the initial growth region including surface tension controlled, transition and inertia controlled regions as divided by Robinson and Judd, the bubble growth rate showed that the bubble radius was proportional to $t^{2/3}$ regardless of working fluids and heating conditions. And in the thermal growth region as also called asymptotic region, the bubble showed a growth rate that was proportional to $t^{1/5}$, also. Those growth rates were slower than the growth rates proposed in previous analytical analyses. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool condition. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• Journal of Ecology and Environment
• /
• v.29 no.5
• /
• pp.461-467
• /
• 2006

The growth pattern and the seasonal changes in nutrient contents of Humulus japonicus were investigated. Stem length of H. japonicus reached the maximum from 240 to 260 Julian date and the median value was found at 255 Julian date. The maximum leaf area was observed from 235 to 248 Julian date and the median value was at 240 Julian date. The maximum growth rate of the stem length ranged from 205 to 227 Julian date. The leaf area showed the maximum growth rate from 196 to 214 Julian date. The median date in the growth rate of the stem length and leaf area was 212 and 205 Julian date, respectively. The growth rate of H. japonicus was related to rainy season and precipitation. Phosphorus and sodium contents of H. japonicus were correlated with maximum potential rate of relative growth. Although stem biomass of H. japonicus was $ 1.5{\sim}3.5$ times larger than that of leaf, N content of the leaf ($4.48{\sim}5.27%$) was about 2 times higher than that of the stem ($2.00{\sim}3.62%$). High content of N might be responsible for the high growth rate of H. japonicus in summer. This result provides valuable information for appropriate timing for the removal of H. japonicus.

• Journal of Korean Society of Forest Science
• /
• v.94 no.2 s.159
• /
• pp.73-81
• /
• 2005

This study was conducted to examine the geographic variation among provenances of Pinus densiflora in survival rate and height growth at four test plantations (Jungsun, Chungju, Naju, and Jeju). The plantations were parts of the eleven provenance trials of Pinus densiflora established by Korea Forest Research Institute in 1996. The survival rate and height growth were significantly different among test plantations at $p{\leq}0.01$. Latitude and longitude of test plantation were negatively correlated with survival rate and height growth. On the other hand, annual mean temperature, mean temperature (Nov.~Feb.), extremely low temperature (Dec.~Feb.), and annual mean growing days of test plantation were positively correlated with these two. The relationships between growth variables and geographic variables were analysed with canonical correlation analysis. A considerable amount of variation in survival rate and height growth was explained by latitude, annual mean growing days, extremely low temperature (Dec.~Feb.) and extremely high temperature (Nov.~Feb.) of provenances. It is estimated that up to 47.1% and 67.4% of the genetic variability in survival rate and height growth was attributable to the environmental variability of the provenances, respectively. The response surface curve of survival rate and height growth was plotted against latitude and longitude to examine growth performance of provenances for each test site. Generally, the local provenances showed better survival rate and height growth.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1999

This study was carried out to investigate the interaction between productivity and light condition and to analyze the material productivity and productive charactaristics under different hours of light in Zoysia japonica. 1. Rate increasement of leaf number and total leaf length was remarkably high at the early growth stage in the control and 9 hour light treatment. The rate gradually decreased as growth proceeded. But 3 hour treatment was very low in the rate from its early growth stage through the whole test period. 2. The increasing rate of leaf area ratio (LAR) in all the experimental plots was remarkably high at the early growth stage after transplanting the grass. The shorter photoperiod resulted remarkable lower increasement of LAR. 3. The rhizome growth rate of the 9 hour photoperiod was high contrast to the 3 hour photoperiod treatment. The increasing rate of node number was also showed similar trend. 4. Chlorophyll content was very high at the 36 days after transplanting and then decreased gradually. Chlorophyll content on 3 hours photoperiod plot severely decreased. The ratio of chlorophyll a to b was decreased significantly at short day treatment. 5. The content of soluble sugar was increased at shorter photoperiod. The highest ratio of sugar content was on August, 28 by HPLC method. Such a result was attributed to accumulation of sugar in spite of low synthesis of ploysacchrides, translocation by low consumption. 6. The increasing rate of standings in all light treatment was high at the early growth stage after transplanting. Short photoperiod treatment by 3hour showed especially low prganic productivity on Zoysia japonica.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.295-303
• /
• 2021

The aim of this study is to analyze the effects of oil prices on economic growth and exchange rate in Saudi Arabia during the period 1980-2020. For this purpose, the linear and nonlinear ARDL models are estimated. The linear ARDL model shows that the oil price and economic growth are cointegrated. Moreover, the two variables have a significant positive association in the long run. However, the oil price has no significant impact on the exchange rate. When estimating the nonlinear ARDL model, it has been shown that oil price is only cointegrated with economic growth but not with the exchange rate. The estimation of nonlinear effects using the nonlinear ARDL model shows that economic growth is affected by both positive and negative oil shocks in the long run. However, the impact of positive shocks is higher than those of negative shocks. Moreover, results show that the short-run effects of positive and negative oil shocks are not statistically significant. Regarding the exchange rate, our results show that the effects of positive and negative oil shocks are not statistically significant. Consequently, this study concludes that the oil price has an asymmetric effect on economic growth in Saudi Arabia, but not on the exchange rate.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.398-404
• /
• 2003

Most previous researches for the hybrid composite materials such as FRMLs(Al/AFRP, Al/GFRP) have evaluated the fatigue delamination behavior using the traditional fracture mechanism. However, most previous researches have not generally been firmed yet. Because delamination growth behavior in hybrid composite should be consider delamination growth rate, $dA_D$/da using the delamination shape factors, fs instead of traditional fracture mechanic parameters. The major purpose of this study was to evaluate the relationship between delamination shape factor, fs and delamination growth rate, $dA_D$ . And a propose parameter on the delamination aspect ratio, b/a. The details of the study are as follow : 1) Relationship between crack length, a and delamination width,b. 2) Relationship between delamination aspect ration, b/a and delamination area rate,($(A_D)_{N}(A_D)_{ALL}$. 3) Variation of delamination growth rate, $dA_D/da$ was attendant on delamination shape factors, $fs_1$, $fs_2$, $fs_3$. The test results indicated the delamination growth rate depends on delamination shape factors.