• 한국작물학회지
• /
• 제52권1호
• /
• pp.112-121
• /
• 2007

Grain filling is a crucial factor that determines grain yield in crops since it is the final process directly associated with crops' yield performance. Grain filling process can be characterized by the interaction of rate and duration of grain filling. This study was conducted, using 16 temperate japonica rice genotypes, with aims to (1) seek variations in grain filling duration and rate on area basis, (2) compare the contribution of grain filling duration and rate to grain yield, and (3) examine the influence of temperature and solar radiation for effective grain filling on grain yield in relation to grain filling duration and rate. Grain filling rate and duration exhibited highly significant variations in the ranges of $20.7{\sim}46.3\;g\;m^{-2}d^{-1}\;and\;11.2{\sim}35.5$ days, respectively, depending on rice genotypes. Grain yield on unit area basis was associated positively with grain filling duration but negatively with grain filling rate. Grain filling rate and duration were negatively correlated with each other. Final grain weight increased linearly with the rise in both cumulative mean temperature and cumulative solar radiation for effective grain filling. Higher cumulative mean temperature and cumulative solar radiation for effective grain filling were the results of longer grain filling duration, but not necessarily higher daily mean temperature and daily solar radiation for effective grain filling. Grain filling rate demonstrated an increasing tendency with the rise in daily mean temperature for effective grain filling but their relationship was not obviously clear. It was concluded that grain filling duration, which influenced cumulative mean temperature and cumulative solar radiation for effective grain filling, was the main factor that determined grain yield on unit area basis in temperate Japonica rice.

• 한국환경과학회지
• /
• 제21권5호
• /
• pp.605-611
• /
• 2012

The purpose of this study is to analyze psychological and physiological effects accordance with viewing and walking in the forest and urban area. In the result of measurement of physiological reactions in nervous system, viewing of the forest had a calming effect on the nervous system by reducing blood pressure and heart rate. The other hand, viewing and walking in the urban area compared to the forest area raised stress by increasing blood pressure and heart rate. In addition, viewing in forest area was effective in stress relief by noticeable reduction of the amylase concentration. In contrast, walking in the urban area was also confirmed an increase of stress by increasing the concentration of the amylase. A viewing and walking in forest area was effective in alleviating depressed on anxiety, anger, fatigue and confusion.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1291-1296
• /
• 2008

Recently, ecological area rate system become effective due to enlargement of recognition and high intellectual standard and for ecological circulation in urban areas. Ecological area rate system is to control environmental quality of life what has grown worse in urban districts and corresponds to purposes of green building certification criteria for environmentally sound and sustainable development. Therefore, purposes of this study are to present suggestions through research of theory and comparison between ecological area rate system and green building certification criteria.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2626-2631
• /
• 2007

Air-water two phase natural circulation flow in the T-HERMES (Thermo-Hydraulic Evaluation of Reactor cooling Mechanism by External Self-induced flow)-1D experiment has been evaluated to verify and evaluate the experimental results by using the RELAP5/MOD3 computer code. The RELAP5 results have shown that an increase in the coolant inlet area leads to an increase in the water circulation mass flow rate. However, the water outlet area does not effective on the water circulation mass flow rate. As the coolant outlet moves to a lower position, the water circulation mass flow rate decreases. The water level is not effective on the water circulation mass flow rate. As the height increases in the air injection part, the void fraction increases. However, the void fraction in the upper part of the air injector maintains a constant value. An increase in the air injection mass flow rate leads to an increase in the local void fraction, but it is not effective on the local pressure.

• 유공압시스템학회논문집
• /
• 제4권4호
• /
• pp.1-7
• /
• 2007

Flow rate is one of the important variables for precise motion control and detection of the faults and fluid loss in many hydraulic components and systems. But in many cases, it is not easy to measure it directly. The orifice area of a servo valve by which the fluid flows is one of key factors to monitor the flow rate. In this paper, we have constructed an estimation algorithm for the effective orifice area by using the model of a servo valve cylinder control system and Kalman filter algorithm. Without geometry information about the servo valve, it is shown that the effective orifice area can be estimated by using only displacement and pressure data corrupted with noise. And the effect of the biased sensor data and system parameter errors on the estimation results are discussed. The paper reveals that sensor calibration is important in accurate estimation and plausible parameter data such as oil bulk modulus and actuator volume are acceptable for the estimation without any error. The estimation algorithm can be used as an useful tool for detecting leakage, monitoring malfunction and/or degradation of the system performance.

• 한국산림과학회지
• /
• 제85권1호
• /
• pp.66-75
• /
• 1996

본 연구는 산불 발생이 임지의 수저류 특성에 미치는 영향을 알아보기 위해 실시했다. 비산불 지역과 산화적지를 대상으로 산림토양의 수저류능을 토양공극, 최대수분량, 이용가능수량, 그리고 투수율을 측정하여 비교 분석하였다. 주요 인자들의 측정에 의해서 얻어진 결과는 다음과 같다. 산화적지와 대조구에서 토성이 깊어질수록 전공극(全孔隙), 조공극(組孔隙), 이용가능 수량, 투수율은 모두 감소하는 경향을 나타내고, 세공극(細孔隙)은 약간 증가하는 경향이 있었다. 대조구에 비해 산화적지에서는 투수율, 조공극량 및 이용가능수량이 낮게 나타나는 반면, 세공극량은 높게 나타났다. 그리고 산불이 발생한 직후에는 산림토양의 공극량 분포에 큰 변화가 일어나지 않지만, 시간이 경과함에 따라 산화적지의 표토 공극분포에 변화를 일으키면서 서서히 토심 20-40cm까지 영향을 미치는 것으로 나타났다. 또한 토심변화에 따른 이용가능수량의 변화는 대조구에 비해 산화적지에서 상대적으로 큰 폭으로 감소하는 경향이 있었다. 이 결과로 산림의 수저류능은 산불에 의해 크게 영향을 받는 것을 알 수 있었다.

• 설비공학논문집
• /
• 제19권11호
• /
• pp.776-781
• /
• 2007

Optimized capacity of equipments are essential for energy saving and low cost construction and operation. So we must use proper design data for HVAC system design. We investigated for architectural data, equipment capacity, cooling and heating load design criteria of 52 office buildings. Following research results were obtained by carrying out each task. Office building effective area rate is 63%. The average building cooling load of South Korea is $140W/m^2$ and average heating loads in Seoul and Pusan area are $120{\sim}130W/m^2$ and $70{\sim}80W/m^2$. We also analysised HVAC design criteria. Person ratio in effective building area is $0.2person/m^2$, sensitive and latent heat loads of a person are 60W and 65W, light and equipment loads of office buildings are $25W/m^2$ and $20W/m^2$.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.347-353
• /
• 2019

Although membrane distillation (MD) has great promise for desalination of saline water sources, it is crucial to improve its thermal efficiency to reduce the operating cost. Accordingly, this study intended to examine the thermal energy efficiency of MD modules in a pilot scale system. Two different modules of hollow fiber membranes were compared in direct contact MD mode. One of them was made of polypropylene with the effective membrane area of $2.6m^2$ and the other was made of polyvinylidene fluoride with the effective membrane area of $7.6m^2$. The influence of operation parameters, including the temperatures of feed and distillate, feed flow rate, and distillate flow rate on the flux, recovery, and performance ratio (PR), was investigated. Results showed that the two MD membranes showed different flux and PR values even under similar conditions. Moreover, both flow rate and temperature difference between feed and distillate significantly affect the PR values. These results suggest that the operating conditions for MD should be determined by considering the module properties.

• 한국농촌건축학회논문집
• /
• 제21권1호
• /
• pp.9-16
• /
• 2019

The decrease in population of school age is one of major influencing factor of transformative educational environment. After the nineteen eighties, the population of South Korea has increased step by step, but the population of school age has been decreasing rapidly by low birth rate. As a result, closed school by merger and abolition of small school occurred all over the country. The closed school needed effective function as center of local community. Consequently the purpose of this study is to provide basic data for effective policy making of closed school by comparative analysis of educational environment such as number of students, schools, students per class, status of usage of closed school of the east area and the west area divided by The Tae Baek Mountains in the Gangwon-do, which has the least students in the nationwide. The results of this study are summarized as follows: 1) Gangwon-do has high decreasing rate of population, schools and students compared with other provinces. However it has significantly low number of students per class. 2) The number of students, schools of the west area in Gangwon-do outnumbers that of the east area. However the number of students per class of the east area in Gangwon-do lesser than that of the west area.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.49-56
• /
• 2018

The use of highly absorptive materials in cement-based materials is increasing for internal curing purpose. However, calculation of correct absorption capacity of such materials is not easy, which leads to change in the effective water-to-cement ratio of cement paste by either absorbing or releasing water. In this study, effective absorption capacity of a highly absorptive material was found using isothermal calorimetry. Moreover, the effect of specific surface area was investigated. It was found that the method was capable of finding effective water absorption capacity of activated carbon fiber. For the activated carbon fiber used in this research, the effect of specific surface area was negligible because the high BET surface area was due to micropores less than 1nm, which does not affect the rate of hydration curve. Thus, the effective absorption capacity of such materials can be found successfully using this method.