• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.6
• /
• pp.77-86
• /
• 2016

Due to aging of the rural and mountain populations the labor force is reduced. However work intensity continues to increase, thus, there is a need to improve the current effectiveness of forest operations. This study compared and analyzed the Operation productivity and efficiency of planting containerized seedlings using a battery-powered planting auger and a mattock. Growth was also investigated by looking into the initial growth increments in the planted seedlings. Tasks were investigated by analyzing the process and operation time needed to plant 1 containerized seedling using a planting auger and a mattock. The time spent on the various elements of the planting process was measured with a stopwatch but observations were done continuously. Result of the study shows that with the use of a lightweight planting auger the average time spent to plant a containerized seedling is 18.61 seconds while with the use of a mattock it took an average of 26.96 seconds which clearly demonstrates that the planting auger is more efficient in terms of working hours. Working intensity was also analyzed with the use of a portable heart rate monitor (Polar V800). The average increase in heart rate and work intensity index were analyzed for one planting cycle. It was observed that when using the lightweight planting auger, there was a 46.51% increase in the average heart rate while a 74.67% increase in heart rate when the mattock was used which shows that there is a significant increase in heart rate when mattock is used. In addition, work intensity index was observed to be 29.95% and 47.83% when the planting auger and mattock were used respectively. With the continuous use, work intensity index is significantly higher with the use of the mattock as compared to that of the lightweight planting auger. There were no significant differences on the growth increment of seedlings planted using the different tools until a year after planting, however differences in growth increment were observed after a year. A difference of 15.1 cm in height and 3.41 mm in diameter was observed which shows that the use of lightweight planting auger is excellent for planting containerized seedlings.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1117-1122
• /
• 2017

Pedestrian detection is a very important and valuable part of artificial intelligence and computer vision. It can be used in various areas for example automatic drive, video analysis and others. Many works have been done for the pedestrian detection. The accuracy of pedestrian detection on multiple pedestrian image has reached high level. It is not easily get more progress now. This paper proposes a new structure based on the idea of HOG and convolutional filters to do the pedestrian detection in single pedestrian image. It can be a method to increase the accuracy depend on the high accuracy in single pedestrian detection. In this paper, we use Multiblock HOG and magnitude of the pixel as the feature and use convolutional filter to do the to extract the feature. And then use NEWFM to be the classifier for training and testing. We use single pedestrian image of the INRIA data set as the data set. The result shows that the Convolutional Multiblock HOG we proposed get better performance which is 0.015 miss rate at 10-4 false positive than the other detection methods for example HOGLBP which is 0.03 miss rate and ChnFtrs which is 0.075 miss rate.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.2
• /
• pp.58-65
• /
• 2013

Earthwork activities are typically performed by heavy duty diesel (HDD) construction equipment that consumes large quantities of diesel fuel use and emits large quantities of pollutants, including nitrogen oxides (NOx), particulate matters (PM), hydrocarbon (HC), carbon monoxide (CO), and carbon dioxide ($CO_2$). This paper presents the framework for a model that can be used to estimate the production rate, activity duration, total fuel use, and total pollutants emissions for earthwork activities. A case study and sensitivity analysis for an excavator performing excavations are presented. The tool is developed by combining the multiple linear regressions (MLR) approach for modeling the productivity with the EPA's NONROAD model. The excavator data from RSMeans Heavy Construction Data were selected to build the productivity model, and emission factors of all type of pollutants from NONROAD model were used to estimate the total fuel use and emissions. The MLR model for the productivity rate can explain 92% of the variability in the data. Based on the model, the fuel use and emissions of excavator increase as the trench depth increase, but as the bucket size increase, the fuel use and emissions decrease.

• Health Policy and Management
• /
• v.5 no.2
• /
• pp.18-34
• /
• 1995

To clarify the relationship between the medical supply(medical persons and goods) and the use of bed, the author has made comparison among OECD 24 countries. Per Capita Bed-days can be divided into Average Length of Stay and Admission Rate, and these three variables were regressed upon both In-patient Care Beds of all medical institutions including acute somatic, psychiatric, special, nursing homes and other long-term care and Share of Total Health Employment in Total Employment. The result of regression analysis shows a statistically significant positive relationship between In-patient Care Beds and Average Length of Stay, and negative relationship between Share of Total Health Employment and Admission Rate. In addition to Ordinary Least Square(OLS) estimation, amended Bounded Influence Estimation(BIE) was also made to adjust the influence of outliers. Japan shows a very large number of In-patient Care Beds and a very low Share of Total Health Employment, and this medical situation is judged to have close relation to her long Average Length of Stay and low Admission Rate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.122-130
• /
• 1997

Coastal diaster induced by waves and countermeasures were investigated in the viewpoint of reduction of overtopping rate with enviroment in fishing port. The reduction method of wave overtopping rate using ecosystem control structures was proposed and studied on the efficiency by hydraulic and numerical experiments. The estimation models on wave overtopping rate was proposed after comparing previous models with dimensional analysis and experimental results. Control function o fwave overtopping by use of ecosystem controlstructures was simulated and discussed with combining wave shoaling-dissipation-breaking deformation model around ecosystem control structures and newly proposed calculation model for wave overtopping rate. Feasiblilty of ecosystem control structures could be confirmed for reduction of wave overtopping and fisheries-based multipurpose development of coastal zone.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.4
• /
• pp.295-302
• /
• 2021

As glucocorticoids are well-known as important regulators of stress and the immune system, their function and clinical use have elicited substantial interest in the field of reproduction. In particular, the effect of glucocorticoid therapy on endometrial receptivity during assisted reproduction, including in vitro fertilization (IVF) cycles, has led to a great deal of interest and controversy. However, previous studies have not been able to provide consistent and reliable evidence due to their small, non-controlled designs and use of different criteria. Considering the potential risk of exposure to glucocorticoids for mothers and fetuses in early pregnancy, the use of glucocorticoids in IVF cycles should be carefully evaluated, including the balance between risk and benefit. To date, there is no conclusive evidence that the use of glucocorticoids improves the pregnancy rate in IVF cycles with unselected subjects, and a further investigation should be considered with a proper study design.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.98-101
• /
• 2000

On CELP type Vocoders G.723.1 6.3kbps/5.3kbps Dual Rate Speech Codec, which is developed for Internet Phone and videoconferencing, uses VAD(Voice Activity Detection)/CNG (Comfort Noise Generator) in order to reduce the bit rate in a silence period. In order to reduce the bit rate effectively in this paper, we first set the boundary condition of the energy threshold to prevent the consumption of unnecessary processing time, and use three decision rules to detect an active frame by energy, pitch gain and LSP distance. To evaluate the performance of the proposed algorithm we use silence-inserted speech data with 0, 5, 10, 20dB of SNR. As a result when SNR is over 5dB, the bit rate is reduced up to about 40% without speech degradation and the processing time is additionally decreased.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.255-258
• /
• 2003

TCP is taking over 95％ among the Internet traffics. Recently the demands of multimedia services in the Internet has been increasing. These multimedia services mostly need real-time deliverly, and then RTP has been a de facto to transmission protocol for these real-time multimedia services. RTP uses UDP as its underlying transport protocol, and thus it does not support any rate and congestion control. Thus, for fair use of the Internet bandwidth with TCP traffics. RTP also needs a rate control. One constraint of RTP is that the feedback information(delivered by, RTP's twin protocol, RTCP) is recommended to be sent no less than 5 seconds. In this paper, we propose a TCP-friendly RTP rate control which use only RTCP feedback information at every 5 seconds. The experiment results show that our proposed algorithm works. But, it is found that we need more time to test the effects of parameters and policies of the algorithms, which will be reported later.

• Journal of the Korean Professional Engineers Association
• /
• v.29 no.3
• /
• pp.94-104
• /
• 1996

When Broadband Integrated Services Digital Network(BISDN) becomes commercially available In public network, conventional Local Area Network(LAN)s will still be in use. The first wide spread application for B-ISDN will be the interconnection of LANs. The equipment providing the connection between the LAN and the BISDN will be given the general name Inter Working Unit(IWU). We addresses the congestion problem of many interworking issues. In this paper, Our study is concentrated on applying connectionless network protocol for interworking. We suggest a rate control method in the network layer to prevent a buffer overflow in the IWU. Since this rate control method can be applied to prevent buffer overflow in a congested IWU, We investigate the use of rate control to solve congestion problems of IWU and parallize network layer with rate control to lessen the congestion problem in IWU.