• Title/Summary/Keyword: Rate of Use

Search Result 10,420, Processing Time 0.042 seconds

Fugitive Emission Characteristics of HFC-134a from Reefer Container (냉동컨테이너에서의 HFC-134a 탈루배출 특성에 대한 연구)

  • Kim, Eui-Kun;Kim, Seungdo;Lee, Young Phyo;Byun, Seokho;Kim, Hyerim
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.30 no.2
    • /
    • pp.110-118
    • /
    • 2014
  • This paper addresses the fugitive emission factors of Reefer Container at use-phase and disposal-phase. The residual quantities and operation time of thirty nine Container were weighed, using a commercial recover of refrigerants to determine the emission factors at the use-phase. The emission factor at the disposal-phase, refrigerant is accomplished has not recycled, the residual rate was assumed that the emission factor. The average residual rate of thirty nine Container is determined to be $70.8{\pm}4.0%$. The emission factor at the use-phase is estimated to be $4.9{\pm}0.9%/yr$ in the case of using average age of 8.1 years and the average residual rate determined here. We estimate 162.7 g/yr for the average emission quantity of refrigerant per operating Container, while 2038.1 g for that per waste Container. Since the chemical compositions of refrigerant of waste Container were the same as those of new refrigerant, it is expected that the refrigerant recovered from waste Container can be reused for refrigerant.

Effects of Sources and Quality of LED Light on Response of Lycium chinense of Photosynthetic Rate, Transpiration Rate, and Water Use Efficiency in the Smart Farm

  • Lee, Seungyeon;Hong, Yongsik;Lee, Eungpill;Han, Youngsub;Kim, Euijoo;Park, Jaehoon;Lee, Sooin;Jung, Youngho;You, Younghan
    • Korean Journal of Ecology and Environment
    • /
    • v.52 no.2
    • /
    • pp.171-177
    • /
    • 2019
  • Smart farm is a breakthrough technology that can maximize crop productivity and economy through efficient utilization of space regardless of external environmental factors. This study was conducted to investigate the optimal growth and physiological conditions of Chinese matrimony vine (Lycium chinense) with LED light sources in a smart farm. The light source was composed of red+blue and red+blue+white mixed light using a LED system. In the red+blue mixed light, red and blue colored LEDs were mixed at ratios of 1:1, 2:1, 5:1, and 10:1, with duty ratios varied to 100%, 99%, and 97%. The experimental results showed that the photosynthetic rate according to the types of light sources did not show statistically significant differences. Meanwhile, the photosynthetic rate according to the mixed ratio of the red and the blue light was highest with the red light and blue LED ratio of 1:1 while the water use efficiency was highest with the red and blue LED ratio of 2:1. The photosynthetic rate according to duty ratio was highest with the duty ratio of 99% under the mixed light condition of red+blue+white whereas the water use efficiency was highest with the duty ratio of 97% under the mixed light of red+blue LED. The results indicate that the light source and light quality for the optimal growth of Lycium chinense in the smart farm using the LED system are the mixed light of red+blue (1:1) and the duty ratio of 97%.

Prototype Manufacturing Using 3D Printing and Characteristics of Flow Rate and Dynamics for High Temperature Solenoid Valve (3D 프린팅을 이용한 고온용 솔레노이드 밸브의 시제품 제작 및 유량과 동적특성 평가)

  • Yi, Hyung Wook;Lee, Yong Moon;Shin, Bo Sung;Lee, Tae Gu;Kang, Myung Chang
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.33 no.5
    • /
    • pp.341-348
    • /
    • 2016
  • The solenoid valve is used widely across various industries; however, solenoid valves for use in high-temperature environments have to be highly specified, such as those used in thermal power plants and steel mills. As such, we have developed a solenoid valve, using an already developed solenoid, to allow for more specific use. In this type of development method, use of 3D printing is very effective, allowing for a reduction in errors in design and production. This study includes a mathematical model of the solenoid valve. Then, the simulation from the mathematical model was performed using the AMESim (Advanced Modeling Environment for Simulation of Engineering Systems). We made a prototype valve using the simulation results and also measured the flow rate and dynamic performance.

Factors Associated with the Use of Pap Test in a Rural Area (일부 농촌 지역 여성의 자궁경부암 조기검진에 영향을 미치는 요인)

  • Koo, Hye-Won;Lee, Won-Jin;Chang, Soung-Hoon;Yoo, Keun-Young;Lee, Kun-Sei
    • Journal of Preventive Medicine and Public Health
    • /
    • v.32 no.2
    • /
    • pp.147-154
    • /
    • 1999
  • Objectives: To construct basic data to develop strategies for achieving higher Pap test coverage rate by evaluating factors associated with the use of Pap test through population-based survey. Methods: 16.4%(671) of the 4,090 women, who were eligible population for this study, in 3 Myens of Chung-ju City participated in this study voluntarily from July 21 to 26, 1997. After basic physical examination by trained doctors, they were interviewed with structured questionnaire by well-educated interviewers. Results: It shows that only 54.3% of study participants experienced Pap test. The strongest factor which is related with the use of Pap test was the history of having breast screening tests(aOR=8.71, 95% CI=4.25-17.84). Probability of ever having Pap test was also higher in married women(aOR of single=0.46, 95% CI=0.29-0.72), younger(Ptrend<0,051, more educated (Ptrend<0.001), non-smoker (aOR of smoker=0.25, 95% CI=0.12-0.55), women of ever having Hepatitis test(aOR=2.60, 95% CI=1.73-3.88) in multiple lineal logistic analysis. Conclusions : This study suggests that several factors significantly associated with the use of Pap test, and especially, high-risk population for cervical cancer such as women of older ages, less educated, living alone are less likely to have the Pap test. We should concentrate on encouraging high-risk women in the use of Pap test to improve Pap test coverage rate.

  • PDF

Effectiveness and Safety of Tranexamic Acid in Spinal Deformity Surgery

  • Choi, Ho Yong;Hyun, Seung-Jae;Kim, Ki-Jeong;Jahng, Tae-Ahn;Kim, Hyun-Jib
    • Journal of Korean Neurosurgical Society
    • /
    • v.60 no.1
    • /
    • pp.75-81
    • /
    • 2017
  • Objective : Spinal deformity surgery has the potential risk of massive blood loss. To reduce surgical bleeding, the use of tranexamic acid (TXA) became popular in spinal surgery, recently. The purpose of this study was to determine the effectiveness of intra-operative TXA use to reduce surgical bleeding and transfusion requirements in spinal deformity surgery. Methods : A total of 132 consecutive patients undergoing multi-level posterior spinal segmental instrumented fusion (${\geq}5$ levels) were analyzed retrospectively. Primary outcome measures included intraoperative estimated blood loss (EBL), transfusion amount and rate of transfusion. Secondary outcome measures included postoperative transfusion amount, rate of transfusion, and complications associated with TXA or allogeneic blood transfusions. Results : The number of patients was 89 in TXA group and 43 in non-TXA group. There were no significant differences in demographic or surgical traits between the groups except hypertension. The EBL was significantly lower in TXA group than non-TXA group (841 vs. 1336 mL, p=0.002). TXA group also showed less intra-operative and postoperative transfusion requirements (544 vs. 812 mL, p=0.012; 193 vs. 359 mL, p=0.034). Based on multiple regression analysis, TXA use could reduce surgical bleeding by 371 mL (37 % of mean EBL). Complication rate was not different between the groups. Conclusion : TXA use can effectively reduce the amount of intra-operative bleeding and transfusion requirements in spinal deformity surgery. Future randomized controlled study could confirm the routine use of TXA in major spinal surgery.

Selection of Ventilation Rate and Filter for a Residential Housing in View of Indoor Particle Concentration (공동주택의 적정 환기량 및 필터의 선정 - 실내입자농도를 중심으로 -)

  • Noh, Kwang-Chul;Jung, Yee-Kyeong;Hwang, Jung-Ho
    • Proceedings of the SAREK Conference
    • /
    • 2008.06a
    • /
    • pp.517-522
    • /
    • 2008
  • Ventilation rate and filter were selected to simultaneously satisfy indoor air quality and minimize energy consumption in residential housing. The concentrations of indoor particles were calculated using an adapted mass balance model for various ventilation airflow rates. To satisfy the guidelines for indoor concentrations of particles, the minimum ventilation rates of 1.0/h, 0.6/h and 0.4/h were required for MERV11, MERV13 and MERV14, respectively. And the fan power consumptions induced by ducts, a heat exchanger and a filter were calculated for various ventilation airflow rates. The increase in the ventilation rate caused a dramatic increase in the power consumption, but the filter performance did not have much of an effect on the fan power for ventilation airflow rates lower than 0.4/h. The use of the ventilation filter of MERV 14 was suggested at a ventilation rate of 0.4/h when the fan power consumptions were considered in addition to the indoor concentrations of particles and $CO_2$. The use of the MERV14 filter at a ventilation rate of 0.6/h could be more effective than the additional use of an indoor air cleaner when the residential housing unit was ventilated.

  • PDF

Leisure Time of Unmarried Workers and Influencing Factors (미혼취업자의 여가시간 및 영향요인 연구)

  • Ahn, Soo-Mi;Lee, Ki-Young
    • Journal of Family Resource Management and Policy Review
    • /
    • v.16 no.3
    • /
    • pp.109-132
    • /
    • 2012
  • This study explores how unmarried workers use their leisure time according to the 2009 Korean Time Use Survey. The purposes of this study are: 1) to investigate leisure time as it relates to leisure participation rates and leisure participation time and 2) to analyze the effect of socio-demographic variables on leisure time and leisure participation by unmarried workers. The following is a summary of the major findings. First, leisure participation differed with variations in leisure activities. Unmarried workers participated in media contact, human relations activities, and hobby activities more than other activities. Participation in learning activities was higher on weekdays than on Sunday. Men participated in sports and outdoor activities more than women on Sundays. The participation rate of media contact was the highest, while the participation rate of volunteer activities was the lowest. Second, influencing factors on leisure time included gender, age, monthly income, and gender role attitudes when work time was controlled. For example, unmarried workers with egalitarian attitudes spent less leisure time. Third, gender was the strongest determinant of leisure participation. The probability of women's leisure participation was higher than men except in regards to sports and outdoor activities, and hobby activities.

  • PDF

A Study on the Feature of Using Media for Education through Longitudinal Data Analysis (종단자료 분석을 통한 청소년 미디어 교육 활용 특성 분석 연구)

  • Heo, Gyun
    • Journal of Internet Computing and Services
    • /
    • v.21 no.4
    • /
    • pp.77-85
    • /
    • 2020
  • The purpose of this study is to explore the changing trajectory of using educational media through longitudinal data analysis. We categorize the feature of using educational media as usage for learning, usage for information, and usage for the game. We explore the longitudinal changing patterns of usage for learning, usage for information, and usage for the game by LGM(Longitudinal Growth Modeling). We also find the gender difference between these longitudinal changing trajectories. We used 3,499 samples of KYPS middle school second-grade panel data. We found these results: (a) Both usage for learning and information are statically significant variability in initial level and rate of change. Both of the changing trajectories have increased. (b) Girls have a higher rate of the change both in the usage of learning and information than boys over time. (c) There is a statistically significant individual variability in initial levels and rate of change in the usage of the game over time. (d) Boys have a higher rate of initial value than girls in the usage of games, but there is no significant difference in the rate of changing trajectories.

Treatment, Disposal and Beneficial Use Option for Sewage Sludge (하수슬러지 처리기술 동향 및 최적화 처리방안)

  • Choe, Yong-Su
    • 수도
    • /
    • v.24 no.5 s.86
    • /
    • pp.29-44
    • /
    • 1997
  • Sewage sludge produced in Korea was 1,275,800 tons (dewatered sludge cake) per year in 1996, which is 3,495 tons per day, 0.303% of 11,526,100 tons per day of sewage treated in 79 sewage treatment plants. Sludge production has been and will be increasing in accordance with construction of new facilities for sewage treatment. Most of the sludge is currently disposed by landfill and ocean dumping, but it is becoming difficult to find suitable sites for landfill, particularly in big cities such as Seoul. In addition, rapid increase of landfill cost is anticipated in a near future. Current trend for sludge disposal in advanced countries is land application. Over the past 10 to 20 years in the United States, sludge management practices have changed significantly, moving from disposal to beneficial use. They use biosolid for utilization instead of sludge for disposal. Under the Clean Water Act of 1972, amended in 1987 by Congress, the U.S. EPA was required to develop regulations for the use and disposal of sewage sludge. The EPA assessed the potential for pollutants in sewage sludge to affect public health and the environment through a number of different routes of exposure. The Agency also assessed the potential risk to human health through contamination of drinking water sources or surface water when sludge is disposed on land. The Final Rules were signed by the EPA Administrator and were published (Federal Register, 1993). These rules state that sewage sludge shall not be applied to land if the concentration of any pollutant in the sludge exceeds the ceiling concentration. In addition, the cumulative loading rate for each pollutant shall not exceed the cumulative pollutant loading rate nor should the concentration of each pollutant in the sludge exceed the monthly average concentration for the pollutant. The annual pollutant loading rate generally applies to applications of sewage sludge on agricultural lands. The most popular beneficial use of sewage sludge is land application. The sludge has to be stabilized for appling to land. One of the stabilization process for sewage sludge is lime stabilization process. The stabilization process is consisted of the stabilizing process and the drying process. Stabilization reactor can be a drum type reactor in which a crossed mixer is equipped. The additive agents are a very reactive mixture of calcium oxide and others. The stabilized sludge is dried in sun drier or rotary kiln.

  • PDF

Study on Measurements in Thyroid Uptake Rate Test (갑상선섭취율검사시(甲狀腺攝取率檢査時) 측정조건(測定條件)에 관(關)한 조사연구(調査硏究))

  • Kyong, Kwang-Hyon;Kim, Hwa-Gon
    • Journal of radiological science and technology
    • /
    • v.4 no.1
    • /
    • pp.55-62
    • /
    • 1981
  • This study was conducted, during the period of 20-30th, July in 1981, to survey measurement methods in thyroid uptake rate test in Seoul city. The results were summarized as follows: 1. For the great part of nuclear medcine department, a mount of radioiodine($^{131}I$) administrated to the patients was $50-100{\mu}Ci$ in thyroid uptake rate test. 2. Distribution of scintillation, counter with crystal size of $1\frac{1}{2}inch$ was 43%, 3inch(22%), 2.5inch(14%) and $2\frac{1}{2}inch$ was 7% in RAI uptake rate test. 3. When RAI uptake rate test was performed, distribution of collimator in use was flat field type collimator(78%) in general and cylindrical type collimator was 22%. 4. High voltage applied to the P-M tube was $900{\sim}1000V$(50%) and most units provided $3{\sim}15%$ of the window range for the $^{131}I$ peak $\gamma-ray$ energy. 5. Distribution on the use of neck phantom for measurements standard solution was 57% and distribution of b filter in use for room background counts and extrathyroidal tissue was 43% and 50%. 6. The distance between the counter and the source was 25cm(58%) in measuring radioactivity of standard solution, thyroid tissue and background radioactivity count. 7. The early uptake measurements(2, 4, 6 hours) are done after administration of the radioiodine dose and also 24-hour and 48-hour uptake measurements are done in routine test.

  • PDF