• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.413-416
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.581-585
• /
• 1999

The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.25-31
• /
• 2005

Cellulose acetate derivatives containing 6-(p-hexyloxyphenyl)carbonyl spirobenzopyran (CA-COSP) were prepared from base-catalyzed etherification of cellulose acetate, and their physical and photochromic properties were characterized. The degree of substitution of COSP was calculated from the amount of residual hydroxyl groups in cellulose acetate measured by the $^1H$-NMR and UV spectrometric data. It was ranging from 0.87 to 45.5% depending on the reaction condition. UV/vis spectrometry of the resulting CA-COSP revealed that the polymer shows a reversible color change by changing its color from colorless to blue upon UV irradiation forming a merocyanine structure, and returning back again to colorless spiropyran structure by visible light or by heat. The rate of color change was faster in solution than in the film. In the more polar solvent, the more stable was the resulting merocyanine, and the slower was the rate of reverse reaction to spiropyran. Compared to COSP blended with cellulose acetate, in which a phase separation was observed for samples containing more than 0.9 wt% of COSP, up to 48 wt% of COSP could be blended in CA-COSP without phase separation.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.121-132
• /
• 2007

This paper addressed the issue of a generalized cost model for transit assignment. The model composed of walk time, waiting time (including transfer waiting time), line-haul time, transfer walk time, and fare. The weights of each component were supposed to be calculated using the stated preference (SP) data, which were collected prudently in order to reflect reality. The marginal rate of substitution and wage rate were applied to calculate the weights. The results showed that the weight of walking time per in-vehicle travel time (IVTT) was 1.507, the weight of waiting time (per IVTT) was 1.749, that of transfer time (per IVTT) was 1.474, and that of fare (per IVTT) was 1.476 for trips between inner-city areas in Seoul. Weights for each component were identified as 1.871, 1.967, 1.015, and 0.857, respectively, for trips between Seoul and Gyeonggi. Statistical significance existed between two cases and each variable was also statistically significant. Transit assignment using the relative weights estimated in this study was implemented to analyze the travel index in a macroscopic and quantitative basis. The results showed that average total travel times were 30.23 minutes and 63.29 minutes and average generalized costs were 2,510 won and 3,880 won for trips between inner-city areas in Seoul and between Seoul and Gyeonggi, respectively.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.187-193
• /
• 2002

The reaction rates of substituted 6-chloroquinoline with p-substituted benzoyichorides $p-CH_3,$ p-H, $p-NO_2$ have been measured by conductometry in acetonitrile, and the constants are determined at various temperatures (10, 15, 20, $25^{\circ}C$) and pressures (1, 200, 500, 1000 bar). From the values of rate constants, the activation parameters (Ea, ${\Delta}V^{\neq}$, ${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$, ${\Delta}G^{\neq}$) and the pressure dependence of Hammett p values were determined. The rate constants increased with increasing temperatures and pressures, and are further increased to introduction to the electron donor substiuents in substrate $(p-NO_2)$ with 6-chloroqinoline. When the activation volume and the activation entropy are all negative And the Hammett p values are positive for the substrate over the pressure and temperature range studied. The results of kinetic studies for pressure and substituent show that thease reactions proceed in typical $S_N2$ reaction mechanism and "associative $S_N2$" in bond formation favored with increasing pressures.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2014

This is an experimental study for recycling coal ash left over from coal use as a potential fine aggregate in concrete. Coal ash is generally divided into either fly ash or bottom ash. Fly ash has been utilized as a substitution material for cement in concrete mixes. On the other hand, bottom ash has the problem of low recycling rates, and thus it has been primarily reclaimed. This study partially substituted fine concrete aggregates with bottom ash to increase its application rate and therefore its recycling rate; its suitability for this purpose was confirmed. The concrete's workability dropped noticeably with increasing bottom ash content when a fixed water-cement ratio of concrete mix was used. Thus, concrete mixes with higher ratio levels are required. To address this problem, concrete was mixed using a polycarboxylate high-range water reducing agent. The fluidity and air entrainment immediately after mixing the concrete and 1 h after mixing were measured, thereby replicating the time concrete is placed in the field when produced either in a ready-mixed concrete or in a batch plant. As a result of this research, the workability and air entrainment were maintained 1 h after mixing for a concrete mixture with approximately 30% of its fine concrete aggregates substituted with the bottom ash. A slight drop in compression strength was seen; however, this confirmed that potential of using bottom ash as a fine aggregate in concrete.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.133-146
• /
• 2021

Aragonite is one of common polymorphs of calcium carbonate (CaCO₃) and formed via biological or physical processes through precipitation in many different environments including marine ecosystems. It is noted that aragonite formation and growth as well as the substitution of trace elements such as strontium (Sr) in the aragonite structure would be dependant on several key parameters such as concentrations of chemical species and temperature. In this study, properties of the incorporation of Sr into aragonite were investigated over a wide range of various saturation conditions and temperatures similar to the marine ecosystem. All pure aragonite samples were inorganically synthesized through a constant-addition method with varying concentrations of the reactive species ([Ca]=[CO₃] 0.01-1 M), injection rates of the reaction solution (0.085-17 mL/min), and solution temperatures (5-40 ℃). Pure aragonite was also formed even under the Sr incorporation conditions (0.02-0.5 M, 15-40 ℃). When temperature and saturation index (SI) with respect to aragonite increased, the crystallinity and the crystal size of aragonite increased indicating the growth of aragonite crystal. However, it was difficult to interpret the crystal growth rate because the crystal growth rate calculated using BET-specific surface area was significantly influenced by the crystal morphology. The distribution coefficient of Sr (K_Sr) into aragonite decreased from 2.37 to 1.57 with increasing concentrations of species (Ca²⁺ and CO₃^2-) at a range of 0.02-0.5 M. Similarly, it was also found that K_Sr decreased 1.90 to 1.54 at a range of 15-40 ℃. All K_Sr values are greater than 1, and the inverse correlation between the K_Sr and the crystal growth rate indicate that Sr incorporation into aragonite is in a compatible relationship.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.239-244
• /
• 2007

In order to investigate the effect of fluorine ion in the $Li_{1-x}FeO_2Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8) cathode material, it was synthesized $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.05{\le}y{\le}0.15$) cathode materials at $350^{\circ}C$ for 10hrs using solid-state method. $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.0{\le}y{\le}0.1$ was composed many large needle-like particles of about $1-1.5\;{\mu}m$ and small particles of about 50-100 nm, which were distributed among the larger particles. However, $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ material showed slightly different particle morphology. The particles of $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ were suddenly increased and started to be a spherical type of particle shape. $Li/Li_{1-x}FeO_{1.9}F_{0.1}-Li_xMnO_2$ cell showed a high initial discharge capacity of 163 mAh/g and a high cycle retention rate of 95% after 50 cycles. The initial discharge capacity of $Li/Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ ($0.05{\le}y{\le}0.15$) cells increased according to the increase of F content. However, the cycleability of this cell was very rapidly decreased when the substituted fluorine content is over 0.1. We suggested that too large amount of F ion fail to substitute into the $Li_{1-x}FeO_2-Li_xMnO_2$ structure, which resulted in the severe decline of battery performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5915-5922
• /
• 2013

In this study, with the aim of improving the performance of shale to allow for its use as coarse aggregate for concrete, we coated shale aggregates with water repellents and polymers and evaluated their physical properties such as density, water absorption rate, wear rate, and stability depending on the coating method. In addition, the effects of the performance improvement were evaluated by assessing the properties of fresh concrete produced by varying the shale substitution ratio, as well as the compressive strength, flexural strength, and freeze-thaw resistance according to curing ages. The test results revealed that the absolute dry densities of all coated aggregates satisfied the standard density for coarse aggregates for concrete(>$2.50g/cm^3$),and the absorption rate of the shale aggregate coated with water repellent decreased by about 50% compared with that of uncoated shale. The wear rate of the polymer-coated shale decreased by up to 13.0% compared with that of uncoated shale. All coated aggregates satisfied the stability standard for coarse aggregates for concrete(${\leq}12$). The water repellent-induced performance improvement decreased the shale aggregates' slump by about 20~30mm compared with that of the uncoated shale aggregates, and the air content of the repellent-coated shale aggregate increased by up to 0.9% compared with that of the uncoated shale aggregate. The compressive strength of the polymer-coated shale aggregates at a curing age of 28 days was RS(F) 95.7% and BS(F) 90.0%, and the flexural strength was RS(F) 98.0 % and BS(F) 92.0% of the corresponding values of concretes produced using plain aggregates. Furthermore, the concrete using polymer-coated shale aggregates showed a dynamic modulus of elasticity of RS(F) 91% and BS(F) 88% after 300 freeze-thaw cycles, thus demonstrating improved freeze-thaw durability.

• Iberoamérica
• /
• v.13 no.1
• /
• pp.123-152
• /
• 2011

The long standing people's culture of Latin America based on social solidarity of the communities makes the political relations between the leader and the people very different from them of the european societies based on the representative democracy. At any rate, the main stream of the Populist Discourses sees the real populist political processes with the pejorative senses attributing the demagogue style of the leaders. In these sense, it is very important to re-consider the populism discourses of Ernesto Laclau who thinks that the populism is a way of interpreting the emergence of the people to establish the social demands in the context of populist real politics. According to Laclau, "the populism seeks for the radical reconfiguration of the revolt of the 'Status Quo' and new order". This work will confirm if this interpretation of Laclau can be applied to Peronist political regime. Meanwhile the first group of the orthodox line of the discourses on populism including Gino Germani shows that the populism is a political movement based on the manipulation and demagogue by the charismatic leader of the irrational mass during the period in transition after the crises of the traditional oligarchy in Latin America. And another line of the main stream of discourses on populism including Cardoso and O'Donnell says that the populism is a political phenomena in a period of transition towards the modernization and the national development by means of the industrialization through the substitution of the imports and the alliance between the classes after the 1930's. But these principal interpretations on populism disregards that in Argentina many urban poor working class people had lived under the racist, unequal painful social relations due to the underestimation and the discrimination by the upper and the middle class with many intellectuals. But Peronism had considered them as the new social subjects with human dignities. And so we have to rethink the clientelism also with another meanings. In this sense, the theories of Ernesto Laclau on populism is very helpful to illuminate the sensitive and ambiguous meanings of Peronism. Especially Peronism makes the urban working class maintain their life styles more tended to them of the traditional communities and go towards the anti-Status Quo. That is a key of success of Peronism not only that time but until these days. And so this study will show that it is the most important thing that Peronist regime had made the emergence of the 'people' in the meaning of advancing the democracy in Argentina.