• Membrane Journal
• /
• v.29 no.5
• /
• pp.237-245
• /
• 2019

Ammonia nitrogen is well known as a substance that causes the eutrophication with a phosphorus in the water, because it is contained in the industrial wastewater, agricultural and the stockbreeding wastewater. In addition, manganese (Mn) and arsenic (As) are included in the mine treated water, etc., and are known as a source of water pollution. Natural zeolites are used to remove ammonia nitrogen in water but it have a low adsorption capacity. In order to improve the low adsorption capacity of the natural zeolite, ion substitution was carried out with $Na^+$, $Ca^{2+}$, $K^+$ and $Mg^{2+}$. The adsorption capacity and removal rate of ammonia nitrogen ($NH_4-N$) were the highest at 0.66 mg/g and 89.8% in $Na^+$ ion exchanged zeolite. Adsorption experiments of Mn and As were performed using ion exchanged zeolites. Ion exchanged zeolite with $Mg^{2+}$ showed high adsorption capacity and removal rates of Mn and As.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.63-67
• /
• 2014

Gallium is an important material and is used by industry of oxide semi-conductor and LED chip. However, the most of the gallium-containing waste resources became outflow abroad and the most of which is imported from oversea by following technical problem and low circulation rate. In this research, the recovery of high purity Gallium metal from Gallium scrap, which containing about 30% of Gallium, was investigated by using hydro-metallurgical process. As pretreatment, the Gallium scrap was pulverized and leached by strong acid such as hydro chloric acid. At the leached solution, Indium was separated as an Indium sponge by substitution reaction and then Gallium and Zinc hydroxide separated and filtrated using strong alkaline solution such as sodium hydroxide by precipitation method. Also, Gallium metal and Zinc metal was recovered by electrowinning method. To make an electrolytic solution, Gallium and Zinc hydroxide was leached by strong alkaline solution. Finally, High purity Gallium metal was recovered by vacuum refining process to remove the Zinc impurity.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.706-711
• /
• 2010

In the applications of a human speech interface, reducing the error rate in recognition is the one of the main research issues. Many previous studies attempted to correct errors using post-processing, which is dependent on a manually constructed corpus and correction patterns. We propose an automatically learnable post-processing method that is independent of the characteristics of both the domain and the speech recognizer. We divide the entire post-processing task into two steps: error detection and error correction. We consider the error detection step as a classification problem for which we apply the conditional random fields (CRFs) classifier. Furthermore, we apply transformation-based learning (TBL) to the error correction step. Our experimental results indicate that the proposed method corrects a speech recognizer's insertion, deletion, and substitution errors by 25.85%, 3.57%, and 7.42%, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.52-58
• /
• 2017

Concrete made with ground granulated blast-furnace slag(GGBS) has many advantage, including improved durability, workability and economic benefits. GGBS concrete is that its strength development is considerably slower under standard $20^{\circ}C$ curing conditions than that of portland cement concrete, although the ultimate strength is higher for same water-binder ratio. GGBS is not therefore used in application where high early age strength is required. In this study, to overcome the limitation of the initial strength decrease due to the use of slag, the slag substitution rate was changed to 30% under the low temperature curing temperature condition and the slag used concrete composition with the same or higher strength performance as OPC(Ordinary Portland Cement).

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.178-184
• /
• 2012

This study was carried out to decide ITS (internal transcribed spacer) sequence of some Korean native $Aster$ species and to resolve their relationship among Korean native $Aster$, including $Kalimeris$, $Gymnaster$, $Heteropappus$ genus separated from $Aster$ in a previously study based on the pappus length. We registered 11 ITS sequences of $Aster$ species including $A.$ $glehni$ to GenBank and those sequences were used for the cluster analysis with $Kalimeris$ species. The size of ITS1 was varied from 248 to 256 bp, while ITS2 was varied from 220 to 222 bp. The G + C content of the ITS region ranged from 49.4 to 53.5%. Pairwise comparison results showed that the substitution rate of ITS1 and ITS2 region was 9% and 10%, respectively. $Kalimeris$ sensu strict substitution rate was lower than that of $Aster$ sensu strict species. The strict consensus parsimonious cluster analysis showed $A.$ $tripolium$ is the first branching from the clade and the next is $A.$ $scaber$. The $Kalimeris$ species except for the $A.$ $hispidus$ were grouped into the same clade with high bootstrap value (91%) within $Aster$. $Gymnaster$ and $Heteropappus$ that has been classified by morphological characters were also grouped into broad sense $Aster$ clade. These results implied these three genera could be merged together into $Aster$ based on the ITS sequences.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1404-1410
• /
• 2008

This study was performed to clarify whether the variation of stress related heat shock protein 70 (HSP70) (GenBank X68213) gene was associated with the nuclear morphological change of in vitro maturation and in vitro capacitation in oocytes of pig ovaries obtained at the slaughterhouse. The nucleic acid substitution of C to G at the 483rd position was found out in HSP70 K1 (290-512) from X68213. The ovaries were categorized into CC, CG, and GG genotypes using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) (BsiHKA I). After the second in vitro maturation of immature fresh oocytes, the relation of nuclear morphological change in oocytes with the genotype of HSP70 K1 gene was such that the MII ratios of the genotype GG and CG (46.93% and 42.20%, respectively) were significantly higher than that of the CC genotype (10.71%) (p<0.05). With respect to in vitro maturation of frozen-thawed oocytes by an open pulled straw (OPS) method, the percentage of oocytes matured to MII stage of the CG genotype showed a higher trend than CC and GG genotypes. After the in vitro maturation of immature fresh oocytes and frozen-thawed oocytes by the OPS method, the relation of the pronuclei change in oocytes matured in vitro with HSP70 genotype was assessed, and the result showed that the enlarged sperm heads (ESH) of matured fresh oocytes and frozen-thawed oocytes were 80.0% and 60.0% in the CC genotype, respectively. The CC genotype group had a significantly higher rate of ESH than the CG and the GG genotype group (p<0.05). The ratios of polyspermic invasion were not different among HSP70 of the three genotypes. It was considered that the rate of in vitro maturation of fertilized oocytes was expected to differ according to genotype of the stress related gene.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.

• Journal of Labour Economics
• /
• v.40 no.1
• /
• pp.1-36
• /
• 2017

This study aimed to analyze influencing factors to increase the wage differential between large enterprise and subcontracted small-medium enterprises by using panel data composed of 19 manufacturing industries for 16 years from 1999 to 2014. According to the results of analysis, in large enterprises the elasticity of substitution between the labor inputs and the subcontracted product supplies from small-medium enterprises was significantly less than 1. So, the increase in wages of workers of large enterprises, whose degree of employment protection was relatively high, seemed to increase the share of wage cost in total cost and was resulted to decrease the cost share of subcontracted product supplies significantly. This was interpreted to be able to exert a negative influence upon the price of subcontracted product supplies and the wages of workers in subcontracted small-medium enterprises, and, therefore, to increase the wage differentials between large enterprises and subcontracted small-medium enterprises. Furthermore, it was also found that the increases in the labor union participation rate at large enterprises and the openness rate of the industry concerned were contributing to make such effects much stronger significantly. In order to mitigate the wage differentials and the polarizing trend in labor market, we can suggest to establish a certain kind of flexible wage system and to introduce co-bargaining practices with the workers of subcontracted small-medium enterprises within large enterprises, and also for the workers of small-medium enterprises, to prepare new social systems to upgrade their human resources and job skills drastically.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.183-198
• /
• 2012

The purpose of this study is to determine potential effectiveness of sourdough starter powder (made of Korean wheat flour) in the quality characteristics of bread and in the substitution effect of a dough improver in bread baking. The bread containing sourdough starter powder was considered to be most suitable for making sourdough bread. As a result, SP 10 showed the best fermentation rate and the highest volume and specific volume. In sensory testing, SP 10 was most preferable among others. According to experimental comparison between optimal addition ratio of SP 10 and other sourdough starter powder products available in Korean domestic market, SI had the highest fermentation rate, highest volume and specific volume. Analysis of texture showed that SI was soft with the lowest hardness and the highest elasticity. Sensory test showed that SI was most preferable of all, and SP 10 was more preferable than BP. It was concluded that SP 10 was not less preferable in the aspect of preference at sensory test than other products. Hence, it is expected that sourdough starter powder made of Korean wheat flour will be possibly more popular and effective in replacing some portion of dough improver of baking.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.235-240
• /
• 1991

Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.