• Korean Security Journal
• /
• no.8
• /
• pp.379-407
• /
• 2004

The cyber-crime is one of the results occurring from the increased dependency toward information-telecommunication devices. Currently, the Korean National Police Agency and many other related law enforcement agencies have made efforts to respond against the cyber-crimes. However, the number of cyber-crime is increasing steadily. The worse problem is that the arresting rate for the cyber-crime has been decreased than before. The reasons of decreasing arresting rate come from many different kinds of cyber-crime methods with the developed computer and network technology, Also, the easy concealment of the cyber-crime by the violater and the difficulty of specification against the data objected to search and seizure make the crackdown difficult. The other difficulties come from the lack of professionally trained investigators, the lack of high-technological investigation devices, and the failure of the technology development for the search and seizure of evidences because of the budget deficit. That is to say, these phenomenon show the comprehensive problem of the cyber-police system. Accordingly, to respond against newly changed cyber-crime activities and to investigate effectively, the cyber-police has to take consideration into the professional reorganization of the cyber-police, the development of the investigation technology, and the adjustment of current cyber-crime laws. Most importantly, the cyber-police needs the high-technological investigation devices, the development of the investigation methods, and the training for the professional human resources with the enough budget support.J

• Korean Journal of Health Education and Promotion
• /
• v.20 no.3
• /
• pp.1-18
• /
• 2003

This study was conducted to evaluate factors related to the recogniton and behavioral intention for smoking cessation programs. Five effective smoking cessation programs were considered： acupuncture, nicotine patch, clinic program, mass education, and alliance programs. To explain the health behavior for smoking and smoking cessation programs, a five-stage behavioral intention model was built, and 500 questionnaires were completed through a telephone survey. Stages of the model included recogniton of the programs, past experiences, present smoking status, intention for smoking, and behavioral intention for smoking cessation programs. The results showed that the recogniton rate of the programs were low in general, therefore strategies of education, public relations, and advertisement need to be pursued. Nicotine dependency resulted in the fact that success rates were low although trial rates of smoking cessation were high among smokers. The necessity for smoking cessation programs was suggested. And the significant factors related to the intention for smoking cessation were individual attitude and reluctancy to pay time and money. Others' attitude was insignificant to subjects' smoking cessation. Purchase rates for nicotine patches were 11.3％ for male and 27.3％ for female, those for acupunture were 7.6％ for male and 10.0％ for female. There were very low purchase rates for clinic, mass education, and alliance programs. In conclusion, evidence-based and effective smoking cessation programs need to be promoted by medical doctors. Strategies in education, public relations, and advertisement also need development. In addition, continuing legal and systematic support for smoking cessation would lower the smoking rate and ultimately contribute to the nation's health.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1145-1150
• /
• 2003

Zr-based bulk metallic glasses have a significant mechanical properties such as high strength and elastic strain limit, and a good processing ability due to the deformation behavior such as superplasticity under supercooled liquid region. Recently, many researches on the determination of optimum working condition in various bulk metallic glasses have been carried out. In this study, the deformation behavior and forming conditions of $Zr_{55}Cu_{30}Al_{10}Ni_{5}$ bulk metallic glass were investigated under three different strain rates and at various temperatures between 627K and 727K. The glass transition temperature, crystallization temperature and supercooled liquid region of $Zr_{55}Cu_{30}Al_{10}Ni_{5}$ bulk metallic glass are 680K, 762K and 82K, respectively.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.2
• /
• pp.21-26
• /
• 2016

The objective of present study is to assess the performance of the first stage compressor in a total 3-stage 5000 HP-level turbo compressor. CFD commercial code, CFX has been used to predict three-dimensional flow characteristics inside of the impeller. Shear Stress Transport (SST) model has been used to simulate turbulent flows through Reynolds-averaged Navier-Stokes (RANS) equations. Grid dependency has been also checked to get optimal grid distribution. Numerical results have been compared with the experimental test results to elucidate performance characteristics of the present compressor. In addition, flow characteristics of the impeller only have been studied for various blade configurations. Angular offset in leading edge of the blade has been selected for the optimal blade design. Performance characteristics in region of low mass flow rate and high pressure ratio between the impeller entrance and exit have been investigated for the selection of optimal blade design. Also, flow instability such as stall phenomena has been studied and anti-stall characteristics have been checked for various blade configurations in the operational window.

• Korean Journal of Food Science and Technology
• /
• v.19 no.6
• /
• pp.515-519
• /
• 1987

The kinetics of thermal softening of chinese cabbage was investigated by puncture tests with an Instron. It was concluded that low temperature-long time blanching and pasteurization process provided an opportunity of improving the texture of pasteurized Kimchi. The rate of softening showed apparent first order kinetics, and the apparent Arrhenius activation energies ranged from 2.8-42.4 kcal/mol. The temperature dependency of the softening rate during pasteurization was more profound by blanching at blanching at higher temperature.

• Structural Engineering and Mechanics
• /
• v.36 no.4
• /
• pp.513-527
• /
• 2010

This paper presents a three-dimensional finite element method based structural analysis model for structural analysis of reinforced concrete high-rise buildings during construction. The model considered the time-dependency of the structural configuration and material properties as well as the effect of the construction rate and shoring stiffness. Uniaxial compression tests of young concrete within 28 days of age were conducted to establish the time-dependent compressive stress-strain relationship of concrete, which was then used as input parameters to the structural analysis model. In-situ tests of a RC high-rise building were conducted, the results of which were used for model verification. Good agreement between the test results and model predictions was achieved. At the end, a parametric study was conducted using the verified model. The results indicated that the floor position and construction rate had significant effect on the shore load, whereas the influence of the shore removal timing and shore stiffness have much smaller. It was also found that the floors are more prone to cracking during construction than is ultimate bending failure.

• Structural Engineering and Mechanics
• /
• v.23 no.2
• /
• pp.147-161
• /
• 2006

Recent developments in fractal theory suggest that fractal may provide a more realistic representation of characteristics of cementitious materials. In this paper, the roughness of fracture surfaces in cementitious material has been characterized by fractal theory. A systematic experimental investigation was carried out to examine the dependency of fracture parameters on the aggregate sizes as well as the loading rates. Three maximum aggregate sizes (4.76 mm, 12.7 mm, and 19.1 mm) and two loading rates (slow and fast loading rate) were used. A total of 25 compression tests and 25 tension tests were performed. All fracture parameters exhibited an increase, to varying degrees, when aggregates were added to the mortar matrix. The fracture surfaces of the specimens were digitized and analyzed. Results of the fractal analysis suggested that concrete fracture surfaces exhibit fractal characteristics, and the fractal geometry provide a useful tool for characterizing nonlinear fracture behavior of concrete. Fractal dimension D was monotonically increased as maximum aggregate sizes increase. A new fractal fracture model was developed which considers the size and shape of aggregate, and the crack paths in the constituent phases. Detailed analyses were given for four different types of fracture paths. The fractal fracture model can estimate fractal dimension for multiphase composites.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.4
• /
• pp.43-54
• /
• 2018

In this study, we assessed dependency of small hydropower potentials on the two different runoff such as the estimated runoff based on the rainfall amounts and measured runoff. The hydpropower potentials were evaluated using actural power generations taken from Deoksong, Hanseok, and Socheon small hydropower plants over Han and Nakdong river basins, respectively. As a result of comparing the actual power generation amount with the potential amount based on the rainfall amount and the estimated amount based on the observed flow amount by each small hydroelectric power plant, the degree of latent small hydro energy by the observed flow was confirmed to be high. It is confirmed that the potential hydroelectric power generation rate is estimated to be about average 30%Point higher than the actual generation amount as a result of the measured flow rate rather than using the rainfall amount. Based on this, a method for improving the degree of the actual generation amount is proposed.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.2
• /
• pp.201-209
• /
• 2023

Time comparison techniques are required for generating and keeping Coordinated Universal Time (UTC) and to distribute standard clocks. These techniques play an important role in various fields, including science, finance, military, and communication. Among these techniques, Two-Way Satellite Time and Frequency Transfer (TWSTFT) ensures a relatively high accuracy, with a time comparison accuracy at a nanosecond level. However, TWSTFT systems have some limitations, such as the dependency on extra network links. In this paper, we propose an improved method for TWSTFT system operation and design a message structure for the suggestion. Additionally, we estimate the data rate and redundancy for the new TWSTFT signal with the designed message structure.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.303-309
• /
• 1999

The fretting wear behaviour of Zircaloy-4 tube used as the fuel rod cladding in PWR nuclear power plants has been investigated at the different test environment, in light water and in air as a function of slip amplitude, normal load, test duration and frequency. Zircaloy-4 tubes were used for both of oscillating and stationary specimens. A fretting wear tester was designed to be suitable for this fretting test. The wear volume and specific wear rate of Zircaloy-4 tube in water were greater than those in air under various slip amplitude. It was found that delaminate debris and surface cracks were observed at low slip amplitude and high load in water Experimental results showed that the light water accelerated the wear of Zircaloy-4 tube at low slip amplitude in fretting.