• 소성∙가공
• /
• 제14권6호
• /
• pp.559-564
• /
• 2005

INCONEL 718, nickel based superalloy, has good formability, high strength, excellent corrosion resistance and mechanical properties at high temperature. Owing to theses attractive properties, it is utilized in applications such as combustion system, turbine engines and nuclear reactors. In such applications, components are typically required to be tolerant of high stress impact loading. This may cause material degradation and lead to catastrophic failure during service operation. Accurate understanding of material's mechanical properties with various strain rates is required in order to guarantee the reliability of structural parts made of INCONEL 718. This paper is concerned with the dynamic material properties of the INCONEL 718 at various strain rates. The dynamic response of the INCONEL 718 at the intermediate strain rate is obtained from the high speed tensile test and at the high strain rate is from the split Hopkinson pressure bar test. The effect of the strain rate on dynamic flow stress, work hardening characteristics, strain rate sensitivity and elongation to the failure is evaluated with the experimental results. Experimental results from both the quasi-static and the high strain rate up to 5000/sec are interpolated in order to construct the Johnson-Cook model as the constitutive relation that should be applied to simulate and design the structural parts made of rNCONEL 718.

• 한국안광학회지
• /
• 제19권2호
• /
• pp.261-270
• /
• 2014

목적: 인위적으로 유발된 광학적 흐림이 원거리 시력과 대비감도에 미치는 영향을 $Optec^{(R)}$ 6500으로 측정하여 알아보았다. 방법: 평균연령 $22.90{\pm}1.92$세의 대학생 31명(남자 16명, 여자 15명)을 대상자로 선정하였다. 타각적, 자각적 굴절검사를 실시하여 완전교정값을 구하였고, 광학적 흐림은 S0.00 D~S+3.00 D(+0.50 D step)까지 시험렌즈를 시험테에 장입하여 검사하였다. 원거리 시력과 대비감도는 $Optec^{(R)}$ 6500을 이용하여 측정하였고, 검사환경은 명소시 조건하에서 양안으로 측정하였다. 결과: 원거리 시력은 광학적 흐림의 양이 증가하면 감소되었고, 시력의 감소율(decrease rate)은 점점 작아졌다. 대비감도는 광학적 흐림의 양이 증가하면 모든 공간주파수의 대비감도가 감소되었고, 정점대비감도는 중간 공간주파수(6 cpd)에서 낮은 공간주파수(1.5 cpd)로 이동하는 현상을 보였다. 또한 시력은 최고시력에서 약 0.77까지 구간에서만 정상적인 대비감도의 정점인 6 cpd의 공간주파수에서 정점을 나타내었다. 결론: 적은 양의 굴절이상을 교정하지 않거나 부적절한 굴절교정상태이면, 적은 양이라 할지라도 대비감도가 저하되고 비정상적으로 정점대비감도가 이동하여 일상생활에 시각적 불편함을 야기할 수도 있으므로 항상 주기적인 시력검사와 신중한 안경처방값을 결정하여야 된다고 사료된다.

• 소성∙가공
• /
• 제14권1호
• /
• pp.65-70
• /
• 2005

A phase mixture model was employed to simulate the deformation behaviour of metallic materials covering a wide grain size range from micrometer to nanometer scale. In this model a polycrystalline material is treated as a mixture of two phases: grain interior phase whose plastic deformation is governed by dislocation and diffusion mechanisms and grain boundary 'phase' whose plastic flow is controlled by a boundary diffusion mechanism. The main target of this study was the effect of grain size on stress and its strain rate sensitivity as well as on the strain hardening. Conventional Hall-Petch behaviour in coarse grained materials at high strain rates governed by the dislocation glide mechanism was shown to be replaced with inverse Hall-Petch behaviour in ultrafine grained materials at low strain rates, when both phases deform predominantly by diffusion controlled mechanisms. The model predictions are illustrated by examples from literature.

• 소성∙가공
• /
• 제3권2호
• /
• pp.215-228
• /
• 1994

The purpose of this paper is to pursue a general method to determine both the flow stress of a material and the friction factor by ring compression test. The materials are assumed to obey the expanded n-power hardening rule including the strain-rate effect. Ring compression is simulated by the rigid-plastic finite element method to obtain the database used in determining the flow stress and friction factor. The Simulation is conducted for various strain hardening exponent, strain-rate sensitivity, friction factor, and compressing speed, as variables. It is assumed that the friction factor is constant during the compression process. To evaluate the compatibility of the database, experiments are carried out at room and evaluated temperature using specimens of aluminum 6061-T6 under dry and grease lubrication condition. It is shown that the proposed test method is useful and easy to use in determining the flow stress and the friction factor.

• 대한토목학회논문집
• /
• 제9권4호
• /
• pp.9-14
• /
• 1989

변형율 속도를 고려할 수 있는 철근콘크리트부재 해석모델을 이용하여 서로 다른 설계인자를 가지는 철근콘크리트부재의 하중 재하속도에 따른 민감성을 연구하였다. 수행된 연구결과에서 정적하중에서부터 동적하중을 받는 부재의 압축거동 및 휨거동특성은 서로 상이함을 발견하였다. 본 논문에서는 또한 하중재하속도에 따른 철근콘크리트부재의 압축강도 및 휨강도를 계산할 수 있는 설용적인 설계공식을 제안하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.500-510
• /
• 1996

A Direct injection -mixing total -flow -control sprayer was developed and evaluated . The system provided precise application rates and minimized operator exposure to chemicals as well as providing a possibility for recycling container so f unused chemicals that can causes environmental contamination. Chemicals were metered and injected proportionally to the diluent flow rate to provide constant concentrations. The main diluent flow was varied in response to changes in travel speed. Experimental variables of the sprayer were the control interval, the sensitivity of flow regulating valve, the tolerance of control object and the sensitivity of the injection pump system. The optimal performance of the flow control system was with an average response time of 8.5 sec at an absolute steady state of error of 0.067 L/min (0.8% of flow rate). The average response time of the injection rate was -0.53 sec and the coefficient of variation (CV) of concentration was 3.2%.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.623-627
• /
• 2016

A power-adjustable fully-integrated CMOS optical receiver with multi-rate clock-and-data recovery circuit is presented in standard 65-nm CMOS technology. With supply voltage scaling, key features of the optical receiver such as bandwidth, power efficiency, and optical sensitivity can be automatically optimized according to the bit rates. The prototype receiver has −23.7 dBm to −15.4 dBm of optical sensitivity for 10⁻⁹ bit error rate with constant conversion gain around all target bit rates from 1.62Gbps to 8.1 Gbps. Power efficiency is less than 9.3 pJ/bit over all operating ranges.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.476-484
• /
• 2006

The failure prediction and preventive maintenance for the equipment of nuclear power plant area using reliability-centered maintenance have been grown. On the other hand, the maintenance for power distribution system consists of time-based maintenance mainly. In this paper, the new maintenance algorithms for power distribution system are developed considering reliability indices. First of all, Time-varying failure rates are extracted from data accumulated at KEPCO using exponential distribution function and weibull distribution function. Next, based on the extracted failure rate, reliability for real power distribution system is evaluated for applying the effective maintenance algorithm which is the analytic method deciding the maintenance point of time and searching the feeder affecting the specific customer. Also the algorithm deciding the maintenance priority order are presented based on sensitivity analysis and equipment investment plan are analyzed through the presented algorithm at real power distribution system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.454-458
• /
• 2004

본 논문에서는 시각 시스템의 민감도를 고려한 새로운 비디오 율제어 기법을 제안한다. 제안된 방식은 MPEG2 TM5 율제어 기법과 같이 3단계의 구조로 구성되어 있으나, 적응적 양자화를 위한 시각의 시-공간 민감도에 근거한 새로운 마크로블록 활성도 척도를 사용한다. 모의 실험을 통해 TM5 방식에서 사용된 공간 활성도보다. 제안된 시-공간 결합 활성도가 주관적, 객관적 화질 측면에서 우수함을 증명한다.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.124-131
• /
• 1996

The dynamic material property of Mn-B ally high-strength steel is investigated through the rod impact test which is one of simple test methods for the analysis of the material behavior under high-strain-rate. Rod impact test is performed to produce the deformed shape of rod and analyzed by the one-dimensional theory based on conservation law and the two-dimensional hydrocode AUTODYN-2D. The dynamic yield stress is determined and compared with the static yield stress to investigate the strain-rate sensitivity of Mn-B alloy high-strength steel.