• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.371-377
• /
• 1995

Silicon oxide films were grown on single-crystal silicon substrates at low temperatures (25~205$^{\circ}C$) in a low pressure electron cyclotron resonance (ECR) oxygen plasma. The growth rate of the silicon oxide film increased as the temperature increased or the pressure decreased. Also, the thickness of the silicon oxide film increased at negative bias voltage, but not changed at positive bias voltage. The growth law of the silicon oxide film was approximated to the parabolic form. Capacitance-voltage (C-V) and current density-electric field (J-E) characteristics were studied using Al/SiO2/p-Si MOS structures. For a 10.2 nm thick silicon oxide film, the leakage current density at the electric field of 1 MVcm-1 was less than 1.0$\times$10-8Acm-2 and the breakdown field was higher than 10 MVcm-1. The flat band voltage of Al/SiO2/p-Si MOS capacitor was varied in the range of -2~-3 V and the effective dielectric constant was 3.85. These results indicate that high quality oxide films with properties that are similar to those of thermal oxide film can be fastly grown at low temperature using the ECR oxygen plasma.

• Genomics & Informatics
• /
• v.12 no.1
• /
• pp.2-11
• /
• 2014

After the initial enthusiasm of the human genome project, it became clear that without additional data pertaining to the epigenome, i.e., how the genome is marked at specific developmental periods, in different tissues, as well as across individuals and species-the promise of the genome sequencing project in understanding biology cannot be fulfilled. This realization prompted several large-scale efforts to map the epigenome, most notably the Encyclopedia of DNA Elements (ENCODE) project. While there is essentially a single genome in an individual, there are hundreds of epigenomes, corresponding to various types of epigenomic marks at different developmental times and in multiple tissue types. Unprecedented advances in next-generation sequencing (NGS) technologies, by virtue of low cost and high speeds that continue to improve at a rate beyond what is anticipated by Moore's law for computer hardware technologies, have revolutionized molecular biology and genetics research, and have in turn prompted innovative ways to reduce the problem of measuring cellular events involving DNA or RNA into a sequencing problem. In this article, we provide a brief overview of the epigenome, the various types of epigenomic data afforded by NGS, and some of the novel discoveries yielded by the epigenomics projects. We also provide ample references for the reader to get in-depth information on these topics.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.72.2-72.2
• /
• 2013

We present a UBVI and $H{\alpha}$ photometric study of the young open cluster NGC 1893 in the outer Galaxy as part of "Sejong Open cluster Survey (SOS)" project. Using the properties of early-type stars in the photometric diagrams 65 early-type members were selected. More than 120 $H{\alpha}$ emission stars and candidates were found by $H{\alpha}$ photometry. Together with the published young stellar object catalogue and X-ray source list for this cluster, a total of 837 pre-main sequence (PMS) stars were identified in our photometric data. We obtained the mean reddening of < E(B-V) > = $0.56{\pm}0.08$ mag from the (U-B, B-V) diagram and confirmed the normal reddening law ($R_V=3.1$) toward NGC 1893 based on color excess ratios from optical to mid-infrared wavelengths. The zero-age main sequence fitting to the reddening-corrected color-magnitude diagrams gives a distance modulus of $V_0-M_V=12.8{\pm}0.1$. The age of the cluster inferred from stellar evolution models is about 1-2 Myr. We also found the Salpeter/Kroupa type initial mass function for this cluster. Finally, the mass accretion rate of 80 PMS stars with UV excess emission was estimated for the stars with masses from $0.6M_{\odot}$ to $5M_{\odot}$.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.313-315
• /
• 2017

We present physical properties of $24{\mu}m$ galaxies detected by AKARI and Spitzer and their evolution between redshifts 0.4 < z < 2. Using multi-wavelength data from X-ray to radio observations in NEP Deep Field (for AKARI) and Subaru/XMM-Newton Deep Field (for Spitzer), we derive photometric redshift, stellar mass, star-formation rate (SFR), dust extinction magnitude and rest-frame luminosities/colors of the $24{\mu}m$ galaxies from photometric SED fitting. We infer the SFRs from rest-frame ultraviolet luminosity and total infrared luminosity calibrated against Herschel photometric data. For both survey fields, we obtain complete samples with stellar mass of > $10^{10}M_{\odot}$ and SFR of > $30M_{\odot}/yr$ up to z = 2. We find that specific SFRs evolves with redshift at all stellar masses in NON-power-law galaxies (non-PLGs) as star-formation dominant luminous infrared galaxies (LIRGs). The correlations between specific SFR and stellar mass in the Spitzer and AKARI galaxy samples are well consistent with trends of the main sequence galaxies. We also discuss nature of PLGs and their evolution.

• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.1-4
• /
• 1975

The law prohibits use of human excreta without proper treatment since 1968 in Korea, but the rate of infection of parasitic diseases is high among all ages of people. An examination of parasitic eggs in soil and vegetables was performed from April to September, 1974, soil samples were collected near toilet, at gardens, at vegetable farms with excreta used and not used, and strawberry farms in Shindong myon, Chunseong-gun, Kangwon province, and vegetables collected were cabbage, young radish, lettuce, Welshonion, spinach and strawberry. Main findings are as follows 1. Positive samples of Ascaris lumbricoides are 18 out of 25(64%) in the soils near toilet, 9 out of 28(3.2%) in the garden soils and 8 out of 18(44%) in the soils of vegetable farms. 2. Trichocephalus trichiurus and Enterobius vermicularis were detected in 8 soil samples respectively Trichostrongylus orientalis 7(25%) and Ancylostoma duodenale 3(11%) out of in the soils near toilets. 3. Parasitic egg negatives are 62(55%) out of 112 soil samples. 4. Ascaris lumbricoides is found in 11 roots(48%) of cabbage and young radish out of 23 respectively, 14 lettuce(34%) out of 41,4 Welsh onion(40%) out of 10,3 spinach(33%) out of 9, and 2 strawberry(11%) out of 18. 5. Ancylostoma duodenale positives are 2 roots of cabbage(9%) out of 23, 4 young radish (17%) out of 23, and 7 lettuce(17%) out of 41, and negatives of parasitic eggs on vegetables are 62 roots(51%) out of 124 samples.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.611-614
• /
• 2003

The rheological properties of exopolysaccharide, p-KG03, produced by marine microalgae Gyrodinium impudicum strain KG03 had been studied. The intrinsic viscosity of this p-KG03 was calculated to 65.22 and 50.75 $d{\ell}/g$ using Huggins and Kramer equations (xanthan gum 24.41 and 24.03). Aqueous dispersions at p-KG03 concentrations ranging from 0.1 to 1.0 % (w/w) showed marked shear-thinning properties as Power-Law behavior. In aqueous dispersions of p-KG03 1.0 %, consistency index (K) and flow behavior index (n) were 2,172 and 0.52. The apparent viscosity and the influence of shear rate on different conditions as p-KG03 concentrations, pH, NaCl, $CaCl_2$ and temperature in aqueous solutions were measured. And p-KG03 had mixed with aqueous solutions of xanthan gum and gellan gum, and invested the change of mixed aqueous solution behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.931-937
• /
• 2004

Simultaneous filling is a goal in plastic injection mold that has multi cavities. The moldings which have not been filled at the same time have undesired faults such as dimension inaccuracy, residual stress, law mechanical strength, etc. The best way to simultaneous fill is to be injected in a geometrically balanced runner system. In a general processing, however, in balanced runner system mold, filling imbalance would be observed in cavities. These phenomena result from molten polymer's characteristics and circumstances in balanced runner. In this study, the degree of filling imbalance (DFI) was defined for showing rate of filling imbalance in geometrically balanced injection mold that has 8 cavities. Before the main experiment, an injection molding simulation was conducted to know a pattern of filling imbalance with Moldflow software. There were somewhat differences between results of experiment and simulation about the filling imbalance. The reason for the difference was that the software have not concerned about a situation in a real flow channel. It was also investigated how the injection speed affected on filling imbalance in the experiment.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.45-52
• /
• 2007

The danger of self-ignition of single base propellants will increase with time. Therefore, a good prediction of the safe storage time is very important. In order to determine the remaining shelf-life of the propellants, the content of stabilizer is determined. The propellants stored under normal storage conditions about 10 to 18 years were investigated and accelerated aging test was carried out by storing propellant sample at higher temperature. Finally, we analyzed the results by various methods in order to show the best way to predict the realistic shelf-life. The safe storage life of the propellants will be 24 years, at least 15 years. In case of applying Arrhenius's law, using the reaction rate constant at 28$^{\circ}C$ to 30$^{\circ}C$ to predict the shelf-life by accelerated aging test is reasonable for a good prediction.

• Transactions of Materials Processing
• /
• v.12 no.1
• /
• pp.34-42
• /
• 2003

This paper presents a rigid-plastic finite element method to handle the frictional contact problem between two deformable bodies experiencing large deformation. The variational formulation combined with incremental quasi-static model is employed for treating the contact boundary condition. The frictional behavior of the model obeys Coulomb's law of friction. The proposed contact algorithms are classified into two categories, one for searching contacting nodes and the other for calculating contact forces at the contact surface. A slave node and master contact segment are defined using the geometric condition of finite elements on the contact interface. The penalty parameter is used to limit the penetration between contacting bodies, and the finite elements are coupled with contact boundary elements.us gates and cavity thicknesses. Through this study we have observed that the jetting is related to the die swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.

• Journal of Korea Water Resources Association
• /
• v.32 no.1
• /
• pp.83-94
• /
• 1999

In continental margins, turbid underflows which are not confined to a given channel, are free to spread laterally as well as longitudinally. Lateral spreading can reduce substantially the run out distance of flows along continental shelves and slopes. Laboratory experiments with a large tank, employing saline density currents as surrogates for fine-grained turbidity flow, coupled with dimensional analysis, have been used to develop a simple expression for lateral spreading rates of two-dimensional flows on sloping beds. characteristic length and time are determined by the flow discharge and buoyancy flux at the inlet. By knowing the initial width of the flow, the spreading law can be used to estimate the maximum width of the current at different times as well as the longitudinal spreading rate. Predictions for flows compare favorably against observations.