• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.137-142
• /
• 2021

최근에는 회전자에 희토류 영구자석을 삽입하여 높은 효율과 출력밀도를 얻을 수 있는 매입형 영구자석 (IPM: Interior Permanent Magnet) 전동기 또는 표면부착형 영구자석 (SPM : Surface Permanent Magnet) 전동기처럼 영구자석이 사용된 전동기의 연구가 활발히 이루어지고 있다. 영구자석을 사용하기 때문에 릴럭턴스 전동기나 유도전동기와 비교해 효율이 높고 출력밀도가 높은 장점이 있으나 회전자에 영구자석을 삽입함으로써 고속운전 및 영구자석의 감자로 인한 신뢰성 감소, 희토류 금속의 원가 상승 등이 문제시되고 있다. 본 논문에서는 희토류 영구자석 전동기를 대체할 수 있는 미래기술 개발과, 희토류 저감형 전동기와 탈 희토류 전동기의 기술 선점을 요구하는 시대적 이슈(Issue)에 맞춰 영구자석이 필요 없는 스위치드 릴럭턴스 전동기 (Switched Reluvtance Motor, SRM)를 구동시키기 위한 구동 제어에 연구하고자 한다. PSIM 시뮬레이션 프로그램에서 제공하는 3상 SRM library를 이용하여 회전자 위치 정보 센서를 이용한 SRM의 구동 및 제어 시스템 모델링 (Modeling)을 연구하고자 한다.

• 공업화학
• /
• 제17권5호
• /
• pp.483-489
• /
• 2006

희토류 화합물인 $La_{2}O_{3}$ 및 $CeO_{2}$ 시약과 이들을 함유하는 희토류 광석을 이용하여 제철 폐수 중의 불소 및 유해 중금속 제거에 대하여 연구하였다. 용액 중 불소에 대한 희토류 원소의 제거 반응기구는 $La^{3+}$ 및 $Ce^{4+}$ 등의 양이온이 불소 이온과 불용성 화합물을 형성하는 것으로 알려져 있다. 기존의 불소 제거에 사용되고 있는 소석회와 비교한 결과 $La_{2}O_{3}$ 및 $CeO_{2}$ 의 불소제거 효율이 높았다. HF 용액에서의 제거 효율은 $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $Ca(OH)_{2}$ < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였고, 제철 폐수에서는 $Ca(OH)_{2}$ < $CeO_{2}$ 광석 < $CeO_{2}$ 시약 < $La_{2}O_{3}$ 광석 < $La_{2}O_{3}$ 시약의 순서였다(pH의 영향은 소석회인 경우 pH가 증가할수록 불소제거율이 감소하였다. 세륨화합물과 란탄화합물인 경우는 pH 증가에도 불구하고 불소제거 효율이 증가하는 경향을 보였으나 방류 시 수질조건과 불소제거율을 함께 고려할 때 용액의 적정 pH는 7이 적당하다고 판단된다). 망간제거의 경우, pH 7 이하에서는 소석회가 희토류 화합물보다 우수한 망간제거율을 보였고 pH 10에서는 모든 처리제에 대해서 거의 완벽한 제거특성을 보였다. 총크롬 제거의 경우는 산성 조건에서는 란탄화합물이 가장 높은 불소 제거율을 보였으며 pH 7이상에서는 모든 처리제가 좋은 효율을 보였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 임시총회 및 하계학술연구발표회
• /
• pp.99-99
• /
• 2016

• Metals and materials international
• /
• 제24권6호
• /
• pp.1262-1274
• /
• 2018

The inhibition of gravity segregation has been a long-standing challenge in fabrication and applications of homogeneous immiscible alloys. Therefore, the effect of rare-earth La on the gravity segregation of Al-Bi immiscible alloys was investigated to understand the homogenization mechanism. The results showed that the addition of La can completely suppress the gravity segregation. This is attributed to the nucleation of Bi-rich liquid phase on the in-situ produced $LaBi_2$ phase and the change of the shape of $LaBi_2@Bi$ droplets. In addition, a novel strategy is developed to prepare the homogeneous immiscible alloys through the addition of rare-earth elements. This strategy not only is applicable to other immiscible alloys, but also is conducive to finding more elements to suppress the gravity segregation. This study provided a useful reference for the fabrication of the homogeneous immiscible alloys.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.29-34
• /
• 2008

In this paper, we investigated electrical and physical characteristics of nickel silicide using rare-earth metals(Er, Yb, Tb, Dy), Incorporated Ytterbium into Ni-silicide is proposed to reduce work function of Ni-silicide for nickel silicided schottky barrier diode (Ni-silicided SBD). Nickel silicide makes ohmic-contact or low schottky barrier height with p-type silicon because of similar work function (${\phi}_M$) in comparison with p-type silicon. However, high schottky barrier height is formed between Ni-silicide and p-type substrate by depositing thin ytterbium layer prior to Ni deposition. Even though the ytterbium is deposited below nickel, ternary phase $Yb_xN_{1-x}iSi$ is formed at the top and inner region of Ni-silicide, which is believed to result in reduction of work function about 0.15 - 0.38 eV.

• 소성∙가공
• /
• 제8권3호
• /
• pp.301-301
• /
• 1999

Austenitic stainless steels such as AISI 316L have been used in equipment in which fluid flows at high speeds which can induce cavitation erosion on metallic surfaces due to the collapse of cavities, where the collapse is caused by the sudden change of local pressure within the liquid. Usually AISI 316L is susceptible to cavitation erosion. This research focuses on developing a better material to replace the AISI 316L used in equipment with high speed fluid flow, such as impellers. The effects of Rare Earth Metal (REM) additions on the cavitation erosion-corrosion resistance of duplex stainless steels were studied using metallographic examination, the potentiodynamic anodic polarization test, the tensile test, the X-ray diffraction test and the ultrasonic cavitation erosion test. The experimental alloys were found to have superior mechanical properties due to interstitial solid solution strengthening, by adding high nitrogen (0,4%), as well as by the refinement of phases and grains induced by fine REM oxides and oxy-sulfides. Corrosion resistance decreases in a gentle gradient as the REM content increases. However, REM containing alloys show superior corrosion resistance compared with that of other commercial alloys (SAF 2507, AISI 316L). Owing to their excellent mechanical properties and corrosion resistance, the alloys containing REM have high cavitation erosion-corrosion resistance.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.870-877
• /
• 2018

Cyanex 272 shows the highest separation factor for the rare earth elements from hydrochloric acid solution among the organophosporus acidic extractants, D2EHPA and PC 88A. Solvent extraction of Tb(III) from weak hydrochloric acid solution with an initial pH 3 to 6 was compared with Cyanex 272, its mixture with Alamine 336, and ionic liquid with Aliquat 336. The solvent extraction reaction of Tb(III) using Cyanex 272 was the same as that of light rare earth elements. Synergism was observed for the extraction of Tb(III) by the mixture with Alamine 336 when the initial concentration ratio of Cyanex 272 to Alamine 336 was higher than 5. Use of the ionic liquid led to a great increase in the extraction percentage of Tb(III) from the same initial extraction conditions. While the equilibrium pH of the mixture was always lower than the initial pH, under some conditions extraction with the ionic liquid resulted in a higher equilibrium pH than the initial pH. The loading capacity of the mixture and the ionic liquid was the same and 2.6 times larger than that using Cyanex 272 alone. Ionic liquid was recommended as a suitable extractant for the extraction of Tb(III) from hydrochloric acid solution based on the ease of handling and higher extraction percentage.

• Ocean Science Journal
• /
• 제41권4호
• /
• pp.221-226
• /
• 2006

More attention has been paid to the research on decolorization of dyeing wastewater nowadays. In this study, an investigation into the decolorization of dyeing wastewater was conducted using a combination of coagulant, carboxymethyl chitosan (NOCC) and coagulant aid, polyscrylamide (PAM). The factors influencing the decolorization efficiency, such as pH value, coagulant and the dosages of coagulant, were discussed. The results showed that using PAM as coagulant aid could reach a high decolorization efficiency compared with using NOCC alone. The optimal conditions were pH 2.3, 480 mg/L for NOCC, and 4-8 mg/L for PAM. Under the optimum conditions, the rate of decolorization could achieve 99%, and the removal of chemical oxygen demand (COD) could achieve 90%. In addition, the membrane processes with chitosan/rare-earth-metals could enhance the decolorization rate of Direct Black FF to 94.7%, and Indanthren Red F3B to 98.2%, respectively.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.625-630
• /
• 2005

This study was focused on the catalytic activity for the combustion of low-concentration methane using various commerical catalysts (six transition metal catalysts in Russia and one rare earth metal (Honeycomb) catalyst in Korea). Catalytic activity was strongly influenced by the type and loading content of metal supported in catalyst. Catalytic performance showed the highest activity in Honeycomb catalyst including rare earth metal, which was the most expensive catalyst, while the next was the catalyst supported Cu with high content (AOK-78-52) and also that supported Cr and Co (AOK-78-56). However, both AOK-78-52 and AOK-78-56 catalysts that were very cheap had lower activation energy than Honeycomb catalyst. In the economical field, both AOK-78-52 and AOK-78-56 catalysts with transition metals showed a good alternative catalyst on the combustion of methane.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.296-300
• /
• 2014

The synthesis of pure and rare-earth doped gallium oxide (${\beta}-Ga_2O_3$) nanoparticles is reported. The synthesized nanoparticles are characterized with XRD, TEM, and PL analyses. Strong blue emission is observed from un-doped gallium oxide nanoparticles, while nanoparticles doped with $Eu^{3+}$ and $Tb^{3+}$ give strong red and green emissions, respectively. When doped with $Eu^{3+}$ and $Tb^{3+}$ together, gallium oxide nanoparticles emit white light. The CIE coordinate of the emitted light was found to be (0.33, 0.33), which is well within the white light region.