• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4136-4141
• /
• 2013

전자기 진동 가진기를 적용한 전기 집진기의 효과적인 탈진 여부를 판단할 수 있는 기준은 집진기내 집진판들의 진동 가속도이다. 이러한 진동 가속도는 외부로부터의 가진 주파수와 시스템의 고유주파수의 일치로 인하여 공진이 일어날 때 간헐적으로 최대치를 보이며 효율적인 탈진성능을 기대할 수 있다. 본 연구에서는 한대의 전자기 진동 가진기를 이용하는 단일 객체를 대상으로 한 관점에서 더 나아가, 실제 현장에서 복수의 전기집진탈진기가 설치됨을 고려하여 진동 탈진기의 설치방식에 따라 시스템을 모델링 하였다. 이러한 직렬 및 병렬회로로 연결된 가진기를 적용한 시스템을 대상으로 진동 가속도 계측 실험을 수행하여 직렬 및 병렬식 연결에 따른 진동 가속도의 차이를 비교함으로써 가진기의 배열 방식과 그에 따른 기대 탈진 성능 및 소비전력의 유효성을 검증하였다. 최종적으로 직렬 배열형 모듈이 증가할수록 선형적으로 필요전류량이 증가할 것으로 예상하였으나 급격한 감소나 (6.9% ~ 37.6%) 증가를 (5% ~ 45%) 보여주었다. 단독의 가진기가 사용된 병렬 배열보다, 2대의 가진기가 사용되고 그 전기회로의 연결이 병렬일 때 동일한 전류가 인가되었음에도 약 11.64% 의 가속도 감소 현상을 보였다. 2대의 가진기를 사용하고 입력전류의 값을 소비 전력의 관점에서 동일하게 보정하였을 경우 약 16.80 % 의 가속도 증가 현상을 확인하였다.

• Journal of Magnetics
• /
• 제17권1호
• /
• pp.61-67
• /
• 2012

The miniaturization of an electrostatic precipitator has become a key element in successfully constructing an efficient electrostatic precipitator because of the limited space allowed for installation in a subway tunnel. Therefore, the miniaturization of the rapping system of the electrostatic precipitator has also become important. This research proposes a resonant-type electromagnetic vibration exciter as a vibrating rapper for an electrostatic precipitator. The compact vibrating rapper removes collected dust from the collecting plates without direct impact on those collecting plates. To characterize the dynamic performance of the electromagnetic vibration exciter, finite element analysis was performed using a commercial electromagnetic analysis program, MAXEWLL. Moreover, we analyzed the resonant frequency of an electrostatic precipitator, to which the electromagnetic vibration exciter was applied, by ANSYS. Also, to measure the acceleration generated by the electromagnetic vibration exciter, we manufactured a prototype of the ESP and electromagnetic vibration exciter and measured its acceleration at the resonant frequency.

• 한국환경과학회지
• /
• 제26권2호
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1238-1243
• /
• 2009

As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.