• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1048-1049
• /
• 2006

Rapidly solidified ribbon-consolidation processing was applied for preparation of high strength bulk Mg-Zn-Gd alloys. Mg alloys have been used in automotive and aerospace industries. Rapid solidification (RS) process is suitable for the development of high strength Mg alloys, because the process realizes grain-refinement, increase in homogeneity, and so on. Recently, several nanocrystalline Mg-Zn-Y alloys with high specific tensile strength and large elongation have been developed by rapidly solidified powder metallurgy (RS P/M) process. Mg-Zn-Y RS P/M alloys are characterized by long period ordered (LPO) structure and sub-micron fine grains. The both additions of rare earth elements and zinc remarkably improved the mechanical properties of RS Mg alloys. Mg-Zn-Gd alloy also forms LPO structure in -Mg matrix coherently, therefore, it is expected that the RS Mg-Zn-Gd alloys have excellent mechanical properties. In this study, we have developed high strength RS Mg-Zn-Gd alloys with LPO structure and nanometer-scale precipitates by RS ribbon-consolidation processing. $Mg_{97}Zn_1Gd_2$ and $Mg_{95.5}Zn_{1.5}Gd_3$ and $Mg_{94}Zn_2Gd_4$ bulk alloys exhibited high tensile yield strength (470 MPa and 525 MPa and 566 MPa) and large elongation (5.5% and 2.8% and 2.4%).

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.107-112
• /
• 2013

Cu(In,Ga)$Se_2$ (CIGS) thin films were annealed on molybdenium/sodalime glass substrates of $300{\times}300mm^2$ by rapid thermal processing (RTP) with 2-step rising-temperature times in $N_2$ ambient. Morphological property, structural characteristics and chemical composition of the precursor of CIGS thin films were influenced directly with a change of $1^{st}$-step rising-temperature time in RTP whereas there is no significant difference with the different $2^{nd}$-step rising-temperature time (final crystallization temperature). The shorter $1^{st}$-step rising-temperature time in RTP obtained the higher photovoltaic cell efficiency from 7.469% to 8.479% even though the ideal composition in CIGS thin films could not be accoplished in this study.

• 전자통신동향분석
• /
• 제13권3호통권51호
• /
• pp.71-83
• /
• 1998

반도체 제조용 웨이퍼의 온도를 측정하고 제어하는 기술의 진보로 열처리 장비 시장에서 점점 더 각광을 받고 있는 급속 열처리(rapid thermal process: RTP) 장치의 최근 기술 동향을 전반적으로 조사 분석하였다. RTP의 장점, 온도 제어 모델링 기술(model-based control), 최근에 개발된 여러 종류의 RTP 시스템 설계 및 이들 각각의 기술적인 문제들이 기술된다. 새롭게 개발된 단일 wafer furnace와 광자 효과를 이용한 rapid photothermal process (RPP)에 관해서도 기술하였다. 아울러 최근 열처리 장비 업체들의 현황과 열처리 장비 시장의 향후 전망에 관해서도 검토하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.193-198
• /
• 1999

In the 21th century, everyone feels that the multimedia system is close at hand in real life due to the rapid advance of the computer processing ability and high speed and high guality of communication services. Also the limited frequencies resource will be optimized due to rapid advances in digital video technology which is believed superior to analogue technology in information engineering. MEPG-2 has been introduced for broadcasting use such as digital TV Thus it features the high-definition and hyper-low bit rate. But, because of much throughput it has been implemented by high-priced private ASIC chip and is not in general use yet. But in this research, noticing the rapid enhancement of PC processor performance comparing with the price. MPEG-2 was developed by real time software MPEG-2 had been known impossible to implement with S/W, but the research proved the possibility of the S/W implementation and below are the pictures also in the research was improved 'Motion Vector and Compensation' Algorithm which requires the most operations and UT was made possible real time process. Multimedia Info Society has settled and accompanied by the rapid advance of image-processing technology and lots of standards.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1085-1088
• /
• 2001

The process of styrofoam pattern that has been used for material of press die pattern depends chiefly on handwork. Laser manufacturing system developed to increase precision and efficiency of process that is also able to convert the design easily. Applying the RP(rapid prototyping) concept reversely, the unnecessary part of section is vapored away by heat source of laser beam after converting 3-D CAD model into cross-sectional shape information. Laser beam is line-scanned in plane specimens to measure the depth and width of cut, surface roughness, cross-sectional shape as converting laser power, scanning speed, cutting gas pressure. With these basic data, plane surface, inclined surface, hole, outer contour trimming process is experimented and optimum condition are obtained. In plane and inclined surface experiments, 15W laser power and 50mm/s scanning speed make superior processing property and 30W, 10mm/s make processing efficiency increase in trimming process. With these results, simple patterns were manufactured and the possibility of applying laser manufacturing system to styrofoam pattern was convinced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.265-269
• /
• 1989

Computerized to techniques have been applied to outage call processing system for rapid restoration of power to customers. This paper presents computer aided outage call processing system called '123' system, which has been in operation since 1987. And, also describes its origins, design conception to be considered and its operation effects. From a positive point of view, it shows the functions needs to be added and some problems to be improved. Additionally, it describes the integrated system which has functions of detecting distribution failure, locating failure position by logical computer processing, and although ADS (Automatic Distribution System) has yet to be built up, the primary purpose of the system is to improve service to the customer by means of rapid restoration of electricity outage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.129-134
• /
• 1998

STL which is used in Rapid Prototyping is composed of a lot of triangular facets. The number of triangles and the shapes of these triangles determine the quality of STL. Therefore, proper algorithm is necessary to enhance the quality of triangular patch. In this paper we used the Delaunay triangulation method to apply to following processes. 1) On processing for reducing sharp triangles which cause errors on intersection. 2) On processing for connecting two or more collinear edges. 3) On processing for deleting unnecessarily inserted points in coplanar polygon.

• 사물인터넷융복합논문지
• /
• 제1권1호
• /
• pp.11-19
• /
• 2015

The mobile and ubiquitous environment is experiencing a rapid development of information and communications technology as it provides an ever increasing flow of information. Particularly, GIS is now widely applied in daily life due to its high accuracy and functionality. GIS information is utilized through the tiling method, which divides and manages large-scale map information. The tiling method manages map information and additional information to allow overlay, so as to facilitate quick access to tiled data. Unlike past studies, this paper proposes a new architecture and algorithms for tile searching and indexing management to optimize map information and additional information for GIS mobile applications. Since this involves the processing of large-scale information and continuous information changes, information is clustered for rapid processing. In addition, data size is minimized to overcome the constrained performance associated with mobile devices. Our system has been implemented in actual services, leading to a twofold increase in performance in terms of processing speed and mobile bandwidth.

• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.191-200
• /
• 2012

The purpose of this paper is to review the state of laser processing technology using metal powders. In recent years, a series of research and development efforts have been undertaken worldwide to develop laser processing technologies to fabricate metal-based parts. Layered manufacturing by the laser melting process is gaining ground for use in manufacturing rapid prototypes (RP), tools (RT) and functional end products. Selective laser sintering / melting (SLS/SLM) is one of the most rapidly growing rapid prototyping techniques. This is mainly due to the processes's suitability for almost any materials, including polymers, metals, ceramics and many types of composites. The interaction between the laser beam and the powder material used in the laser melting process is one of the dominant phenomena defining feasibility and quality. In the case of SLS, the powder is not fully melted during laser scanning, therefore the SLS-processed parts are not fully dense and have relatively low strength. To overcome this disadvantage, SLM and laser cladding (LC) processes have been used to enable full melting of the powder. Further studies on the laser processing technology will be continued due to the many potential applications that the technology offers.