• 대한치과마취과학회지
• /
• 제2권1호
• /
• pp.1-6
• /
• 2002

The usage of nitrous oxide is increased for the anxious patient to dental treatment. There are two methods to induce the sedation during dental treatment. One is sedation with drugs the other no need of drugs. We discussed here about sedation with drugs. The methods of drug administration are oral, intramuscular, intravenous, inhalation. The method of oral administration of drugs are convenient to patient and doctor but poor controllability. Intramuscular method is a parenteral technique that maintains several advantages over the enteral technique. However its pales in comparison to other parenteral technique. Intravenous method represents most effective method of ensuring predictable and adequate sedation in all patients. But it has inability to reverse the action of drugs after they have been injected except some drugs (e.g., narcotics and benzodiazepine). A variety of gaseous agents may be administered by inhalation to produce sedation. In dental practice, the inhalation administration of gas means use of nitrous oxide. There are many advantages of nitrous oxide administration. First, very short latent period and rapid onset of drug action which lead to possible titration of drug concentration. With nitrous oxide, clinical effects may become noticeable as quickly as 15 to 30 seconds after inhalation. Recovery from inhalation sedation is also quite rapid. In out patient dental practice rapid recovery is very important because it permit to discharge the patient without escort and the patient return to their ordinary life without limit. To success the conscious sedation with nitrous oxide, the administrator should be keep the mind that always titration of nitrous oxide concentration during induction and treatment. Careful observation need during treatment to prevent oversedation because the adequate nitrous oxide concentration to patients changed by environmental stress. Always begins with 100% oxygen and ends with 100% oxygen to prevent diffusion hypoxia which rare in clinical practice.

• 대한토목학회논문집
• /
• 제31권5D호
• /
• pp.671-677
• /
• 2011

최근 철도 서비스를 개선하고자 기존선을 복선 및 전철화 하는 등 철도네트워크 기능강화사업이 활발히 추진되고 있다. 이를 배경으로 본 논문에서 급행철도와 같이 새로운 철도 운영서비스가 제공될 경우 타 교통수단으로부터 얼마의 전환수요가 발생될 것이며, 철도이용형태는 어떻게 변화될 것인지? 등 앞으로 건설될 대구권 광역철도를 대상으로 SP와 RP데이터에 의한 전환수요 예측방법의 적용성을 검토하였다. 모형 구축결과, 기존 SP와 RP데이터를 결합하는 동시적 모형과 순차적 모형이 모두 유용하여 총통행시간과 통행비용의 파라미터 추정치가 충분한 설명력을 나타내고 있으며, 동시적 방법이 보다 효율적으로 분석되었다. 특히 RP+SP의 결합모형의 타당성을 더욱 높이기위해서 RP데이터를 비례적으로 적용한다면, 철도요금과 통행시간 설정에 따라 전환수요를 쉽게 파악할 수 있을 것이며, 대구권 광역철도를 비롯하여 타 지역에서도 보다 실용적으로 적용할 수 있을 것으로 판단된다.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• 청정기술
• /
• 제18권3호
• /
• pp.265-271
• /
• 2012

화석연료에 대한 의존성을 줄이기 위한 대안으로서 재생에너지 사용이 요구되고 있다. 청정에너지원의 하나인 바이오매스는 그 물성치의 실시간 파악이 중요하기 때문에 다양한 종류의 바이오매스에 대해 널리 연구되어 왔으며, 방법론적인 측면에서는 비침투성이며 많은 정보를 가진 특징으로 인하여 근적외선 분광법이 성공적으로 적용되었다. 본 논문에서는 여러 바이오매스 종류에 대한 물성치의 빠른 예측을 위해 근적외선 데이터에 기반한 비선형 방법론의 적용성을 평가하였다. 다양한 방법론에 기반한 예측 모델들을 근적외선 데이터의 전처리방법과 조합하여 예측 성능을 평가하였다. 바이오매스 물성 예측 모델의 성능에서는 선형 모델보다는 비선형 모델에서 예측오차가 최소화되었으며 전처리 방법과 결합되었을 때 최적의 예측결과를 얻을 수 있었다.

• The Plant Pathology Journal
• /
• 제35권1호
• /
• pp.71-76
• /
• 2019

$SdhB^{P225F}$ and $SdhB^{H272R}$ mutations have been found associated with boscalid resistance in Botrytis cinerea from strawberry in Shanghai, China. For rapid detection of two mutations, tetra-primers were designed and optimized to gain the relatively high accuracy and specificity based on the ARMS-PCR technique, by which resistance can be identified with different lengths of products on agarose gels. The tetra-primer ARMS-PCR systems for $SdhB^{P225F}$ and $SdhB^{H272R}$ were validated by 9 SdhB-squenced strains repeatedly. Then, sensitivity of 30 more strains were also tested by the methods, which were accordant with genotypes by sequencing and the sensitivity of conidial germination to boscalid by 100%. Thus, the methods developed in this study are proved to be rapid, inexpensive, accurate and practical for resistance detection of Botrytis cinerea caused by $SdhB^{P225F}$ and $SdhB^{H272R}$ mutations.

• 한국환경복원기술학회지
• /
• 제4권3호
• /
• pp.38-48
• /
• 2001

A wetland is an ecosystem which is the most useful and highly-energetic transition area. This study has been carried out to develop the wetland function assessment methods and apply on the natural wetlands (Mul-young-ari wetland in Jeju-island and Bangdong wetland in Taejon Metropolitan city) using RAM (Rapid Assessment Method). The RAM is useful method for assessing the wetland functions in terms of general functions acquired by once or twice onsite surveying. Eight functions of 2-12 variables each are analyzed for assessing the wetland functions. The results are as follows : 1) The conservation values of two wetlands are "High". 2) In Mul-young-ari wetland, such functions as groundwater discharge, floral diversity and wildlife habitat, shoreline/stream bank protection are relatively high, but some functions such as flood/storm water storage, aesthetics and recreation are "Moderate" - "High". 3) In Bangdong wetland, such functions as floral diversity and wildlife habitat, groundwater discharge, flood/storm water storage, aesthetics and recreation are high, and another functions are "Moderate" - "High". The taxonomy of this study stems from assessing functions of inland wetlands using indices of RAM. So It is needed that consequent studies are to be performed with verifying the variables and indices.

• 산업기술연구
• /
• 제28권A호
• /
• pp.141-147
• /
• 2008

Several contaminated bacteria such as Lactobacillus brevis and Pediococcus damnosus in beer production cause beer spoilage by producing off flavours and turbidity. Detection of these organisms is complicated by the strict anaerobic conditions and lengthy incubation times required for their cultivation, consequently there is a need for more rapid detection methods. Recently, two contaminated strains were isolated from vessel of beer production and identified as Lactobacillus species by API kit identificaton as well as 16S-23S ITS sequencing analyses. Two isolated strains were named as Lactobacillus sp. HLA1 and Lactobacillus HLB2, respectively. A polymerase chain reaction (PCR) method was developed for the rapid and specific detection of Lactobacillus sp.. Two sets of primer pairs (HLA1-F/HLA1-R and HLB2-F/HLB2-R) were designed for the amplification of a 1576 base pair (bp) fragment of the HLA1 16S-23S rRNA gene and 1888 bp fragement of the HLB2 16S-23S rRNA. Amplified PCR products were highly specific to detect corresponding bacteria when other contaminated strains were used as PCR templates. However, detection of both strains were limited when $100{\mu}{\ell}$ of cultured samples were mixed with $100m{\ell}$ of beer sample in arbitrary manner. The sensitivity of the assay still needs to be improved for direct detection of the small amounts of bacteria present in beer.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.59-64
• /
• 1991

Thin (25-103$\AA$) SiO$_2$ films are grown using the rapid thermal oxidation processing at temperatures of 105$0^{\circ}C$-115$0^{\circ}C$ for 5-30 sec, in order to investigate the characteristics of ultra thin oxide. For measuring the thickness of oxide TEM, ellipsometry, and C-V method which is taken in the condition of small surface band bending are used and compared. When neglecting the small deviation affected by both interface state and moisture charge effect, those three methods described above give similar results. In order to examine the effect of rapid thermal annealing, part of samples are annealed in N$_2$ ambient. MOS capacitors are fabricated and the characteristics of I-V and C-V are measured. Measurements show that the activation energy of initial thickness of oxide grown during the ramp-up time is of 1.125eV and the activation energy of the oxidation rate is of 0.98eV. As oxidation temperature is increased, dielectric breakdown field E$_{BD}$ is decreased due to the increase of fixed charge density N$_f$ However, E$_{BD}$ is shown to be decreased as increasing the thickness of oxide. The increase of N$_f$ in the early stage of thermal annealing results in the decrease of E$_{BD}$.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.286-291
• /
• 2011

Purpose: The purpose of this study was to evaluate the use of OraQuick tests in previously reported articles. Methods: The literature was searched using Pubmed Medline with keywords, such as "OraQuick" or "rapid HIV test". Articles that included the specificity and sensitivity of this device were reviewed. Results: A total of 11 journal articles including 3 domestic articles were reviewed. The sensitivity of the OraQuick Test was reported to be 97.8 to 100% and its specificity was 98.8 to 100%. Conclusion: The results indicated that the simple OraQuick assay has proven to be accurate and it can be used to detect patients with HIV and to prevent the spread of HIV on test screens.