• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.27-29
• /
• 1995

Within regional and municipal planning we are using several levels or types of EIA in the city of Dresden. Some of these types, practical aspects and some experiences of our work will be presented in this contribution. Firstly I may introduce you to some general conditions for your better understanding of our principles of work. Surely you know about. the destruction of the political and economical structures in Eastern Germany since 1989. Until today our not quite simple task is to build up new ones. At the same time people were in great expectation of freedom and high standard of living as soon as possible. Economical difficulties increased in association with the breakdown of the market in Eastern Europe. How to rebuild industrial estatements and how to renew the traffic systems? We had to find answers to all these complex question. Should we only repair the former damages or could we reach a really environmental sound production for the future? The demand for a rapid economic growth is an incredible challenge for the application of new environmental ideas. I am truly not sure whether you know the city of Dresden or not. So I would like to give you a short introduction. Dresden is situated in a valley shaped by the river Elbe. There live about 500,000 people. Dresden has a great reputation for arts and sciences. Its also well know as a town of high technology industries such as electronics and optics. We restored the power plant and therefore we don't need any atomic power plants actually we haven't got one. Since 1990 there were founded many official agencies in Dresden because it is the capatal of Saxony. Considering nature and environment we there is a large forest area called "Dresdner Heide". The river Elbe and the meadows are situated on both sides of the river. There are a lot of green and free places in the city area too. Furtheron there is something unusual for a large city: about 50% of the drinking water resources mostly take place within the city itself. The origin is the ground water as well as water from the river Elbe after filtration of course.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.150-150
• /
• 2016

Mankind is enjoying a great convenience of their life by the rapid growth of secondary industry since the Industrial Revolution and it is possible due to the invention of huge power such as engine. The automobile which plays the important role of industrial development and human movement is powered by the Engine Module, and especially Diesel engine is widely used because of mechanical durability and energy efficiency. The main work mechanism of the Diesel engine is composed of inhalation of the organic material (coal, oil, etc.), combustion, explosion and exhaust Cycle process then the carbon compound emissions during the last exhaust process are essential which is known as the major causes of air pollution issues in recent years. In particular, COx, called carbon oxide compound which is composed of a very small size of the particles from several ten to hundred nano meter and they exist as a suspension in the atmosphere. These Diesel particles can be accumulated at the respiratory organs and cause many serious diseases. In order to compensate for the weak point of such a Diesel Engine, the DPF(Diesel Particulate Filter) post-cleaning equipment has been used and it mainly consists of ceramic materials(SiC, Cordierite etc) because of the necessity for the engine system durability on the exposure of high temperature, high pressure and chemical harsh environmental. Ceramic Material filter, but it remains a lot of problems yet, such as limitations of collecting very small particles below micro size, high cost due to difficulties of manufacturing process and low fuel consumption efficiency due to back pressure increase by the small pore structure. This study is to test the possibility of new structure by direct infiltration of SiC Whisker on Carbon felt as the next generation filter and this new filter is expected to improve the above various problems of the Ceramic DPF currently in use and reduction of the cost simultaneously. In this experiment, non-catalytic VS CVD (Vapor-Solid Chemical Vaporized Deposition) system was adopted to keep high mechanical properties of SiC and MTS (Methyl-Trichloro-Silane) gas used as source and H2 gas used as dilute gas. From this, the suitable whisker growth for high performance filter was observed depending on each deposition conditions change (input gas ratio, temperature, mass flow rate etc.).

• Journal of Microbiology
• /
• v.40 no.4
• /
• pp.313-318
• /
• 2002

To perform the prophylactic study of a vaccine derived from human papillomavirus (HPV) using Balb/c mice, we produced virus like particles consisting of HPV capsid protein L1 which has been reported to induce significant humoral and cellular immunity using various animal model systems. In order to produce HPV16 VLPs, the cDNA of L1 capsid protein in HPV type 16, obtained by polymerase chain reaction, was inserted into yeast expression vector, YEG$\alpha$-HIR525 under the control of GAL10 promoter. The transformation of YEG$\alpha$-HPV16 L1 was performed into the yeast Saccharomyces cerevisiae Y2805 by the lithium acetate method and the yeast clone expressing the highest level of L1 capsid protein of human papillomavirus type 16 was selected by Western blot analysis using anti-HPV16 L1 antibody. The purification of HPV16 VLP has been performed by the ultracentrifugation and gel-filtration methods. To validate the vaccine efficacy of the purified HPV16 VLPs and investigate the properties of HPV16 VLPs to induce humoral immunity, ELISA assay was performed. A significantly increased production of anti-HPV16 VLP antibodies was observed in sera from immunized mice. The neutralization activity of antibodies in the sera from the vaccinated mice was demonstrated by a rapid and simple assay to detect hemagglutihation inhibition activity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.4
• /
• pp.370-375
• /
• 2014

BACE2 is a membrane-bound aspartic protease that is highly homologous with BACE1. While BACE1 processes the amyloid precursor protein (APP) at a key step in generating ${\beta}$-amyloid peptide and presumably causes Alzheimer's disease (AD), BACE2 has not been demonstrated to be involved in APP processing directly, and its physiological functions are unknown. To determine its function and to develop inhibitors from marine sources, we constructed an overexpression vector for producing BACE2. The gene encoding human BACE2 protease was amplified using the polymerase chain reaction and cloned into the pET11a expression vector, resulting in pET11a/BACE2. Recombinant BACE2 protease was overexpressed successfully in E. coli as inclusion bodies, refolded using the rapid-dilution method, and purified via two-step fast protein liquid chromatography using Sephacryl S-300 gel filtration and Resource-Q column chromatography. The BACE2 protease produced was an active form. This study provides an efficient method not only for studying the basic properties of BACE2, but also for developing inhibitors from natural marine sources.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.14-21
• /
• 2001

Rapid backpulsing to reduce membrane fouling of hollow fiber ultrafiltration module (polyacrylonitrile with 50000 l'vlWCO, 1.4 rom OD and 0,9 mm ID) was studied with latex solutions. Values estimated by a theoretical model were compared with the ones obtained from the systems with or without backpulsing, Specific Cake resistance, time consUmt for cake growth, diffusion coefficient, and the rate constants of fnur fouling models; the complete, intermediate. standard blocking and cake filtration were calculated to obtain the theoretical values. High frequency backpulsing gave net increase of fluxes by 40~120%. Fluxes predicted by the model were in good agreement with experimental ones within 14% error bound, The optimum backpulsing strength was acquired at 20% in the ranges of 20~40% strength and the optimum frequcncv was acquired at 2 Hz in the ranges of 0.67~3 Hz.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.639-645
• /
• 2008

The objectives of this research are to (1) observe changes in particle size distribution due to formation of microflocs during coagulation process (2) identify the membrane fouling potential on cross flow system (3) investigate the mechanism of membrane fouling. The rate of flux decline for the hydrophobic membrane was significantly greater than for the hydrophilic membrane, regardless of pretreatment conditions. The pretreatment of the raw water significantly reduced the fouling of the UF membrane. Also, the rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane. That is, during the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation not only improved dissolved organics removal efficiency but also flux recovery efficiency.

• Toxicological Research
• /
• v.24 no.3
• /
• pp.207-212
• /
• 2008

Pesticide residues play several key roles as environmental and food pollutants and it is crucial to develop a method for the rapid determination of pesticide residues in environments. In this study, a simple, effective, and sensitive method has been developed for the quantitative analysis of methoxyfenozide in water and soil when kept under laboratory conditions. The content of methoxyfenozide in water and soil was analyzed by first purifying the compound through liquid-liquid extraction and partitioning followed by florisil gel filtration. Upon the completion of the purification step the residual levels were monitored through high performance liquid chromatography(HPLC) using a UV absorbance detector. The average recoveries of methoxyfenozide from three replicates spiked at two different concentrations and were ranged from 83.5% to 110.3% and from 98.1% to 102.8% in water and soil, respectively. The limits of detection(LODs) and limits of quantitation(LOQs) were 0.004 vs. 0.012 ppm and 0.008 vs. 0.024 ppm, respectively. The method was successfully applied to evaluate the behavioral fate of a 21% wettable powder(WP) methoxyfenozide throughout the course of 14 days. A first-order model was found to accurately fit the dissipation of methoxyfenozide in water with and a $DT_{50}$ value of 3.03 days was calculated from the fit. This result indicates that methoxyfenozide dissipates rapidly and does not accumulate in water.

• Mass Spectrometry Letters
• /
• v.3 no.3
• /
• pp.68-73
• /
• 2012

Fat malabsorption is an important cause of poor growth in infancy and childhood. Steatorrhea tests have been developed using various methods. Traditional measurements of stool fat, however, require large samples and it often takes as a week to complete the analysis. In this paper, a liquid chromatography-electrospray ionization/mass spectrometry (LC-ESI/MS) method was developed for simultaneous quantitative analysis of triacylglycerols, triolein, diolein and monoolein, in mouse feces. Moreover, the procedure was rapid, simple as well as compatible with LC-ESI/MS. Chloroform-isopropyl alcohol solution was used for fat-soluble sample extraction. After centrifugation and filtration, an analytical solution was prepared. Triolein, diolein and monoolein were separated using non-aqueous reversed-phase column with the mobile phase consisting of A (methanol) and B (acetone-isopropyl alcohol). The precision (% CV) and accuracy (% bias) of the assay were 3.8-14.7% and 85.2-114.9%, respectively. This method has been successfully applied to simultaneous determination of triolein, diolein and monoolein in feces from 30 mice. This method can therefore be applied to measure triacylglycerols in mouse feces accurately and precisely by LC-ESI/MS, thereby helping to predictive biomarker in fat malabsorption and diagnostic research.

• Applied Biological Chemistry
• /
• v.47 no.4
• /
• pp.426-429
• /
• 2004

An easy, sensitive and rapid method for the analysis of phytol, a strong ACAT (Acyl-CoA: Cholesterol Acyltransferase) inhibitory diterpenoid, was established. The pre-treatment of sample for GC analysis of phytol includes aq. MeOH extraction, partition of the extracts between EtOAc and water, and filtration of organic phase through Supelclean LC-Si SPE tube. The GC analysis of phytol for a variety of Lactuca sativa was carried out on DB-5 capillary column with flame ionization detector (FID). The consistency in phytol contents according to each variety was not shown. Especially, Jeoktoma, as RS-2 type, showed the highest phytol content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.67-75
• /
• 2002

The human complement receptor type 1 (CR 1, C3 b/C4b receptor) is a polymorphic membrane glycoprotein expressed on human erythrocytes, peripheral leukocytes, plasma and renal glomerular podocytes, which consists of transmembrane and cytoplasmic domains with 30 repeating homologous protein domains known as short consensus repeats (SCR). CR1 has been used as an inhibitor for inflammatory and immune system for the past several years. Recently; it is reported that CRl was found to suppress the hyper-acute rejection in xeno-transplantation and can be used to cure autoimmune diseases. A soluble form of CRl, called sCRl, is a recombinant CRl by cleaving the transmembrane domain at C-terminus and has been expressed in Chinese Hamster Ovary (CHO) cells. Several purification methods for sCR1 from CHO cells have been reported, but most of them require complicated steps at high cost. Moreover, such methods are mostly performed under the pH condition apt to denaturing sCR1 and causes sCRl losing its activity. We here report a rapid and efficient method to purify sCR1 from CHO cell. The new method consists of a two-stage of cell culture by cultivating cells in serum medium followed by serum-free medium, and a two-stage of column purification by means of heparin and gel filtration column chromatography. By using this novel method, sCR1 can be purified in a simple and effective way with high yield and purity, furthermore, the purified sCR1 was confirmed to retain its activity to suppress the complement activation in vivo and ex vivo.