• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.55-61
• /
• 2016

Recently developed ferritic heat resistance steel, T24 was used to evaluate microstructure characteristics of simulated heat affected zone. Also, correlation between the prior austenite grain size and amount of $M_{23}C_6$ carbide dissolution was discussed. With the increasing of peak temperature, Grain size steadily increased up to $1050^{\circ}C$ and then rapidly increased at $1150^{\circ}C$. Of the peak temperature $950{\sim}1050^{\circ}C$, amounts of $M_{23}C_6$carbide dissolution are low. But Most of $M_{23}C_6$ carbide that is inhibited grain growth were dissolved above $1050^{\circ}C$ and decreased volume fraction of carbide. This indicates that grain growth may be achieved through dissolution of carbide in the base material. As of welding, due to very rapid heating rate, $M_{23}C_6$ carbide exists above equilibrium solution temperature that is $800^{\circ}C$, even at $1050^{\circ}C$. So, It was confirmed that close correlation between carbide dissolution in the base material and grain growth. Calculated grain size has a linear relationship with peak temperature, on the other hand, measured grain size discontinuously increased between $950{\sim}1050^{\circ}C$ and above $1050^{\circ}C$. Grain size of heat affected zone at $1350^{\circ}C$ peak temperature showed maximum 67um and minimum 4um. Also, The number of side showed 3 to 10.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.99-104
• /
• 1991

Ta-silicide의 게이트 전극 및 비트라인(bit line)으로의 사용가능성을 알아보기 위하여 As, P, $BF_2$가 $5{\times}10^15cm^-2$의 농도로 이온주입된 다결정 실리콘에 탄탈륨을 스퍼터링으로 증착한 후 급속 열처리로 Ta-silicide를 형성하였다. 형성된 Ta-silicide의 특성은 4-탐침법, X-rayghlwjf, SEM 단면사진과 ${\alpha}$-step으로 조사하였으며, 불순물들의 거동은 Secondary Ion Mass Spectroscopy(SIMS)로 알아보았다. $TaSi_2$의 형성은 $800^{\circ}C$에서 시작하며 $1000^{\circ}C$ 이상에서 완료됨을 알았다. 형성된 $TaSi_2$층으로 out-diffusion 하였다.

• 기술혁신학회지
• /
• 제12권1호
• /
• pp.237-264
• /
• 2009

선도적으로 기술창출단계의 기술혁신에 성공하여 최초경로로 기술리더가 된 국내기업에 대한 혁신 연구는 새롭게 도전하려는 국내기업과 개발도상국기업에게 시행착오를 줄일 수 있는 시사점을 제공할 수 있다. 그러나 개발도상국기업의 기술창출단계 혁신에 대한 연구가 부족하며, 특히 프로세스혁신에 대한 연구는 제품혁신연구에 비해 더욱 부족한 상황이다. 본 연구는 기술창출단계의 프로세스 기술혁신 프로젝트를 대상으로 하는 탐색적 연구이다. 최초경로로 기술리더가 된 POSCO의 FINEX(파이넥스) 사례에서는 기술창출단계 혁신은 기술내재화단계 고도화의 연장선이라기보다는 높은 위험을 감수하는 최고경영층의 결단에 의해 시도되는 불연속적인 특성이 있으며, 기술창출단계 혁신을 시작하는 개발도상국기업이 일반적으로 초기에 직면하는 원천기술을 개발을 위한 기술역량의 부족은 원천기술을 개발 중인 선발자와의 보완적 기술협력을 통해 극복하였다. 그리고 선진국 경쟁자보다 뒤늦게 기술 개발을 시작하였지만 가장 먼저 상용화단계에 도달할 수 있었던 것은 기술개발 가속화(Speed-up)로 기술개발속도에 영향을 주는 세부요인을 파악하였다.

• 한국식품영양학회지
• /
• 제30권4호
• /
• pp.804-812
• /
• 2017

This study investigated the effects of Goami 2 on the properties of Garaetteok. The moisture, crude protein, crude lipid and crude ash contents of the rice were 16.02, 5.40, 1.87 and 0.77%, respectively. The amylose contents (32.16%) and total dietary fiber contents (9.03%) were the highest in Goami 2. The water binding capacity of Goami 2 (167.84%) was higher than general rice flour. Using a rapid visco analyzer (RVA), the initial pasting temperature of Goami 2 was found to be the highest; also, the peak viscosities of Goami 2 were higher than general rice powder. To assess the effect of Goami 2 on the quality characteristics of Garaetteok, the rice-cake was made by adding various amounts of Goami 2 (0, 10, 20, 30, and 40% w/w) to rice. It was observed that higher the amount of added Goami 2, lower were the grades. In terms of the color values of Goami 2 addition, the L-values of Garaetteok were lower with increasing amount of Goami 2; addition of 40% Goami 2 had the lowest value. The textural properties (hardness) also showed that tteok containing the greater amounts of Goami 2 were considerably harder compared with the control. Sensory preference tests revealed that addition of less Goami 2 had the highest scores for appearance, color and overall acceptability, and the Goami 2 added was lower than control. Therefore, as compared to others cultivars, rice flour proved the most acceptable for the preparation of Garaetteok with cultivar rice.

• 정보관리연구
• /
• 제35권4호
• /
• pp.17-33
• /
• 2004

최근 지식과 정보의 창출, 확산 및 활용을 기반으로 하는 지식기반 경제로의 이행이 가속화되고 있다. 이러한 변화 하에서 기술시장 지식정보는 연구개발, 신규투자, 기술도입, 수출시장 모색, 시장 개척, 미래 발전전략 수립 등에 있어서 가장 중요한 요소가 되고 있다. 본 고는 이상적인 기술시장 지식정보 시스템을 구축하기 위해 국내 기술 시장 지식정보와 관련된 유사 사이트의 현황과 문제점을 분석하고, 그 결과를 수합하여 개발방향을 제시하였다. 이 시스템에서는 사용자가 직접 정보분석 시스템에 참여하여 데이터를 분석하여 필요한 데이터를 얻을 수 있도록 하였다. 또한, 다양한 분야의 전문가들이 개별기술 및 아이템의 기술 시장 지식정보에 대해 심층적이고 신속히 정보를 제공함으로써, 국제사회의 급속한 환경변화와 그에 따른 불확실성의 증대에 적극적으로 대처하여, 국가 기술경쟁력 강화에 이바지할 수 있도록 하였다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.579-593
• /
• 2010

Low-power radio frequency (RF) chip transceiver technology and the associated structural health monitoring platforms have matured recently to enable high-rate, lossless transmission of measurement data across large-scale sensor networks. The intrinsic value of these advanced capabilities is the allowance for high-quality, rapid operational modal analysis of in-service structures using distributed accelerometers to experimentally characterize the dynamic response. From the analysis afforded through these dynamic data sets, structural identification techniques can then be utilized to develop a well calibrated finite element (FE) model of the structure for baseline development, extended analytical structural evaluation, and load response assessment. This paper presents a case study in which operational modal analysis is performed on a three-span prestressed reinforced concrete bridge using a wireless sensor network. The low-power wireless platform deployed supported a high-rate, lossless transmission protocol enabling real-time remote acquisition of the vibration response as recorded by twenty-nine accelerometers at a 256 Sps sampling rate. Several instrumentation layouts were utilized to assess the global multi-span response using a stationary sensor array as well as the spatially refined response of a single span using roving sensors and reference-based techniques. Subsequent structural identification using FE modeling and iterative updating through comparison with the experimental analysis is then documented to demonstrate the inherent value in dynamic response measurement across structural systems using high-rate wireless sensor networks.

• International Journal of Computer Science & Network Security
• /
• 제21권7호
• /
• pp.125-132
• /
• 2021

Rapid growth of the higher education role in ensuring the socio-economic and innovative development of the national economy in the context of the development of the information society and the knowledge economy is observed. Achieving positive synergistic effects of the higher education development requires proper funding for university education and research. The existing funding models for national higher education systems in a number of developing countries need modernization in accordance with the modern challenges of economic and innovative development. The purpose of the article is to formulate theoretical - methodological and applied foundations for the development and implementation of the integrated model of the higher education financing under the Quadruple Helix concept. At the center of the developed model are the areas of interaction identified by the authors, namely: Personnel, Science, Management, Innovation, Social area. This made it possible to specify the interests of all stakeholders and orient the activities of higher education institutions to the satisfaction of these interests. Effective implementation of the integrated Model of the higher education financing requires increasing the level of investment attractiveness and practical value of university research; activation of innovative development of enterprises; state stimulation of business participation in university research and education; harmonization of current legislation with EU standards. Implementation of the Model will diversify sources of funding for universities, increase their level of economic security and achieve integrated synergies from the interaction of universities, business, government and the public (as the main stakeholders within the Quadruple Helix concept).

• Corrosion Science and Technology
• /
• 제20권1호
• /
• pp.26-36
• /
• 2021

Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component, as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 ℃ using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensile strength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.