• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.11.1-11.5
• /
• 2015

Rapid palatal expansion(RPE) with the tooth-born appliance is not sufficient to apply to the patients with periodontal problem or insufficient tooth anchorage, and it leads to tipping of the anchorage teeth and increasing teeth mobility and root resorption. To avoid these disadvantages, we present the case using palatal screws and custommade palatal expander. A 23-year-old patient underwent surgically assisted rapid maxillary expansion with the Hyrax expansion using 4 tent screws. The study models were used to measure the pre-/-post surgical width of the anterior and posterior dental arches with a digital sliding caliper. In the result, the custom-made palatal expander with 4 tent screws is suitable for delivering a force to the mid-palatal suture expansion. And it is low cost, small sized and simply applied. The results indicated that maxillary expansion with the custom-made palatal anchorage device is predictable and stable technique without significant complications in patients.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.150-160
• /
• 2019

Objective: This study aimed to analyze the effect of changing various parameters of the bone-borne rapid palatal expander (RPE) using the finite element method (FEM). Methods: In eight experimental groups, we investigated the effect of the number, position, and length of miniscrews; positional changes of the expander; and changes in the hook length on maxillary expansion. In finite element analysis, we compared the magnitude and distribution of stress, and the displacement changes following expansion of the bone-borne RPE. Results: When we compared the number and position of miniscrews, placing miniscrews in the anterior and posterior sides was advantageous for maxillary expansion in terms of stress distribution and displacement changes. Miniscrew length did not significantly affect stress distribution and displacement changes. Furthermore, anteroposterior displacement of the expander did not significantly affect transverse maxillary expansion but had various effects on vertical changes of the maxilla. The maxilla rotated clockwise when the miniscrews were placed in the anterior region. The hook length of the expander did not show consistent results in terms of changes in stress distribution and magnitude or in displacement changes. Conclusions: The findings of this study suggest that changes in the location and length of the miniscrews and displacement of the bone-borne RPE could affect the pattern of the maxillary expansion, depending on the combination of these factors.

• The korean journal of orthodontics
• /
• v.53 no.3
• /
• pp.175-184
• /
• 2023

Objective: To evaluate and compare a series of volume changes in the nasal cavity (NC), nasopharynx, oropharynx, and maxillary sinuses (MS) in growing Class III patients after either rapid palatal expansion (RPE) or alternate rapid maxillary expansion and constriction (Alt-RAMEC) followed by facemask (FM) therapy, by using cone-beam computed tomography (CBCT). Methods: Forty growing Class III patients were retrospectively selected and divided into two matched groups: RPE/FM (14 females, 6 males; mean age, 9.66 ± 1.23 years) and Alt-RAMEC/FM groups (14 females, 6 males; mean age, 10.28 ± 1.45 years). The anteroposterior and vertical displacements of Point A, the volumes of the NC, nasopharyngeal, oropharyngeal, and MS were measured at different time points: pretreatment (T1), postexpansion (T2), and postprotraction (T3). Results: Both groups demonstrated significant maxilla advancement (by 1.3 mm) during expansion, with a statistically significant intergroup difference during protraction (RPE/FM, 1.1 mm; Alt-RAMEC/FM, 2.4 mm; p < 0.05) and throughout the treatment (RPE/FM, 2.4 mm; Alt-RAMEC/FM, 3.7 mm; p < 0.05). NC and nasopharyngeal airway volumes increased significantly in both groups after expansion, protraction, and treatment. The oropharyngeal and MS volumes increased in both groups after protraction and post-treatment. However, no volumetric differences were observed between the two groups. Conclusions: There was no significant difference in airway volume changes, including NC, nasopharyngeal, oropharyngeal airway, and MS, between RPE/FM and Alt-RAMEC/FM groups at different time points. Although there was significantly more forward movement after protraction in the Alt-RAMEC/FM group, the difference was deemed too small to be clinically relevant.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.17-29
• /
• 1991

The purpose of this study was to provide quantitative data describing the effect of rapid palatal expansion (RPE) on nasal airway resistance (NAR). RPE is an orthopedic procedure which is commonly used to widen the maxilla in skeletal Class III patients. 18 subjects (9 males and 9 females, mean age: 10 years 7 months) were selected from the Orthodontics in Yongdong Severance Hospital. Recordings of NAR were taken by active anterior method prior to expansion, immediately after desired maximum expansion, and after approximately 3 months and 6 months, and 1 year. All data was recorded and statistically processed with the SPSS program of IBM PC system. The results are as followings . 1. The average initial NAR of the subjects was 3.84 cm $H_2O/LPS\;(SD{\pm}1.34)$. It was greater than the average NAR of the normal subjects. 2. Among 18 subjects, 9 subjects showed reduction of NAR and 9 subjects showed no specific change of NAR after expansion. 3 An average reduction in NAR after immediately expansion was statistically significant at the 0.05 level. 4. The reduction appeared stable throughout the post treatment observation period of 1 year after expansion. From these results, it was suggested that RPE is a useful method to reduce NAR.

• The korean journal of orthodontics
• /
• v.49 no.2
• /
• pp.89-96
• /
• 2019

Objective: The purpose of this study was to assess the long-term stability of rapid palatal expansion (RPE) followed by full fixed edgewise appliances. Methods: This study included 67 patients treated using Haas-type RPE and non-extraction edgewise appliance therapy at a single orthodontic practice. Serial dental casts were obtained at three different time points: pretreatment ($T_1$), after expansion and fixed appliance therapy ($T_2$), and at long-term recall ($T_3$). The mean duration of the $T_1-T_2$ and $T_2-T_3$ periods was $4.8{\pm}3.5years$ and $11.0{\pm}5.4years$, respectively. The dental casts were digitized, and the computed measurements were compared with untreated reference data. Results: The majority of treatment-related increases in the maxillary and mandibular arch measurements were statistically significant (p < 0.05) and greater than expected for the untreated controls. Although many measurements decreased postretention ($T_2-T_3$), the net gains persisted for all of the measurements evaluated. Conclusions: The use of RPE therapy followed by full fixed edgewise appliances is an effective method for increasing maxillary and mandibular arch width dimensions in growing patients.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.81-89
• /
• 2018

Objective: The aim of this study was to evaluate the stress distribution and displacement of various craniofacial structures after nonsurgical rapid palatal expansion (RPE) with conventional (C-RPE), bone-borne (B-RPE), and miniscrew-assisted (MARPE) expanders for young adults using three-dimensional finite element analysis (3D FEA). Methods: Conventional, bone-borne, and miniscrew-assisted palatal expanders were designed to simulate expansion in a 3D FE model created from a 20-year-old human dry skull. Stress distribution and the displacement pattern for each circumaxillary suture and anchor tooth were calculated. Results: The results showed that C-RPE induced the greatest stress along the frontal process of the maxilla and around the anchor teeth, followed by the suture area, whereas B-RPE generated the greatest stress around the miniscrew, although the area was limited within the suture. Compared with the other appliances, MARPE caused relatively even stress distribution, decreased the stress on the buccal plate of the anchor teeth, and reduced tipping of the anchor teeth. Conclusions: The findings of this study suggest that the incorporation of miniscrews in RPE devices may contribute to force delivery to the sutures and a decrease in excessive stress on the buccal plate. Thus, MARPE may serve as an effective modality for the nonsurgical treatment of transverse maxillary deficiency in young adults.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.334-344
• /
• 2022

Objective: This study aimed to systematically analyze the effect and stability of miniscrew-assisted rapid palatal expansion (MARPE) to provide a reference for the clinical treatment of patients with maxillary transverse deficiency (MTD). Methods: We searched PubMed, Science Direct, Web of Science, Embase, Cochrane Library, CNKI, and Wanfang Database for relevant studies published before February 18, 2021 and selected them according to the eligibility criteria. The Cochrane Handbook for Systematic Reviews (version 5.1.0) criteria were used for the quality assessment of randomized controlled trials, while the scoring protocol of the methodological index for non-randomized studies was used for non-randomized controlled trials. Statistical analysis was performed using the RevMan5.3 software. Results: All the included studies showed a relatively high success rate of expansion. The changes in both the intermolar and alveolar widths after MARPE were statistically significant. MARPE exhibited greater skeletal expansion effects than did conventional RPE. The midpalatal suture was opened in parallel after MARPE. A small amount of relapse was observed 1 year after expansion. MARPE caused tooth inclination and a decrease in alveolar height, but it was less significant than in conventional RPE. Conclusions: MARPE may be an effective treatment modality for patients with MTD. It causes great transverse skeletal expansion in late adolescence. In comparison to conventional RPE, MARPE has lower detrimental periodontal effects and has certain clinical advantages.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.391-399
• /
• 1997

Rapid palatal expansion(RPE) is a method of inducing the new bone formation in the palate by separation of the midpalatal suture, which can be done conveniently by placing heavy force across the maxillary dental arch. This experiment was undertaken to examine the histologic changes after RPE and during retention period. Four young adult dogs(a control dog, three experimental dogs) aged 4 to 6 months old were used for this experiment. Expansion screw($Hyrax^{\circledR}$, Dentarum Inc.) was delevered to the palate and fumed 180 degrees every morning and evening for 8 days, giving a total expansion of 7.2mm. A control dog was sacrified at the starting point of this study without any treatment and three experimental dogs were sacrified after RPE, 14-day retention, and 28-day retention in each. Thereafter, those samples were observed with hematoxylin-eosin(H-E) stain, ground section(Villanueva stain), alkaline phosphatase(ALP) stain, tartrate-resistant acid phosphatase(TRA) stain. The results were as followings: 1. After RPE, collagen fiber bundles were stretched along the midpalatal suture and few osteoblasts were flattened-inactive state and also, a little osteoid tissues was observed. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. 2. After 14-day retention, collagen fiber bundles were stretched along the midpalatal suture and few osteoblasts which had ALP-positive activity in their cytoplasm were seen. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. 3. After 28-day retention, collagen fiber bundles were arranged like those of control dog and osteoblasts which showed a lot of immature bone formation were cuboidal shape and exhibited ALP-positive activity in their cytoplasm. Few multinucleated osteoclasts which had TRAP-positive activity in their cytoplasm were seen in horizontal section, whereas a few osteoclasts were seen in frontal section, especially in the nasal floor side of palatal bone. According to the above results, the new bone formation after rapid palatal expansion was examined after 14-day retention and significantly increased after 28-day retention.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.317-333
• /
• 2000

The purpose of this study was to determine the proliferative activity of the osteoblasts and fibroblasts in the midpalatal area and to investigate the adjacent periodontal tissues of individual tooth following rapid expansion of the palate. Ten young adult dogs, aged approximately ten months, were used in the experiment. The experimental design was consisted of 1 week expansion group(Group E1, 3 dogs), 2 week expansion group(Group E2, 3 dogs), 2 week expansion and 2 week retention group(Group E3, 3 dogs), and control group(Group C, 1 dog). For each group, expansion screw was activated one time per day(1/4 turn;$90^{\circ}$) following Hyrax-screw application. The experimental animals in each group were sacrificed at 1, 2 and 4 weeks following palatal expansion. Maxillary tissue blocks were obtained and prepared ior the histomorphologic and immunohistochemical studies. Light mcroscope, polarizing microscope, and soft X-ray apparatus were used in this study, and following results were obtained. 1. In polarizing microscopic study, the expansion groups(E1 & E2) showed blue color representing bone resorption and new bone formation in midpalatal suture area. E3 groups skewed less blue color compared to the E1 and E2 group. But yellow color increased by calcification in the E3 groups. 2. Immunohistochemical study revealed that positive responses of the osteoblasts to PCNA and undifferentiated fibroblasts to EGF in E1 group were somewhat increased. Positive response to PCNA and EGF were increased in fibroblasts and the osteoblasts forming new bone in E2 group. In E3 group, the positive response cell concentrated the periphery of edge of palatal process in both PCNA and EGF. 3. Throughout the expansion period(E1 & E2), light microscopic study showed the edges of the extensive resorption and new palatal processes, indicating bone remodeling within the suture. E3 group exhibited less remodeling of midpalatal suture area. E2 group and E3 group showed cementum formation and resorption at the apex of 3rd premolar and 1st molar E3 group exhibited extensive hyalinized zone on the cervical portion of buccal side of 1st molar. 4. Soft X-ray analysis of E1 group showed hypomineralized defect and microfractures in various parts of the suture areas when compared with control animals. There was no significant difference in the degree of mineralization in the midpalatal suture region between the C and E3 groups. Tooth axis showed tipping of 3rd premolar and 1st molar in the E2 group and E3 group. Based upon these experimental results, it is concluded that the undifferentiated mesenchymal cells always presented in midpalatal suture area following RPE. Differentiated osteoblasts and fibroblasts possess proliferating cellular activity until the 2 week retention period. The posterior teeth are tend to tip buccally as RPE force applied. Retention group exhibited irreversible response with severe hyalinized zone on the buccal surface of the first molar.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.509-529
• /
• 1992

Skeletal Class III malocclusion is one of the most difficult type to treat and stabilize. For a child with developing skeletal Class III malocclusion, the treatment objective would be to stimulate maxillary growth, particulary one who has markedly deficient maxilla, and to restrain excessive mandibular growth. In order to stimulate the maxillary growth, maxillary protraction appliance is the one of the effective orthopedic appliances in skeletal Class III. The purposes of this study were as follows ; evaluation of the skeletal and dental changes of the maxillary protraction in children with Class III Maxillary deficiency , comparison of the clinical effects between the group with RPE and labiolingual intraoral appliances , comparison of the clinical effects and stability related to the ages of the patients : stability of the maxillary protraction about 1 year after retention. The subjects consisted of 60 children between the ages of 8 and 13.4 who were diagnosed as Class III with maxillary deficiency and were treated with Face Mask (Delaire Type) from the Dept. of Orthodontics Yong Dong Severance Hospital, Yonsei University. 48 children wore the RPE and 12 children wore Labiolingual Appliance. Lateral Cephalograms were taken for each patient at before and after correction of anterior cross-bite in 60 children, and after an observation period of 10 to 14 months in 19 children. X and Y coordinate of 10 landmarks were analyzed using a horizontal line through sella and rotated $6^{\circ}$ down anteriorly as the horizontal reference axis, and a perpendicular verticual line through sella as the vertical reference axis. Each of the 31 measurents (10 verticals, 10 horizontals, 2 angles and 9 others) was statistically analyzed using SPSS/PC statistics. The results are as follows; 1. After maxillary protraction the maxilla and maxillary teeth moved downward and forward, while the mandible and mandibular incisor rotated downward and backward. 2. Maxillary protraction with rapid palatal expansion appliance was more effective than with labiolingual appliance. 3. More downward movement of the posterior palatal plane obserbed with maxillary protraction doing the midpalatal suture opening than with protraction after finishing the palatal expansion 4. The clinical effects of protraction and changes of the retention periods were not statistically significant among the age groups. 5. During the retention period, maxilla and maxillary teeth, and mandible and mandibular teeth moved downward and forward, however the mandibular changes were larger than the maxillary changes.