• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.445-457
• /
• 2017

In this study, we developed an approach to better account for uncertainties in estimated contributions from fine particulate matter ($PM_{2.5}$) modeling. Our approach computes a Concentration Correction Factor (CCF) which is a ratio of observed concentrations to baseline model concentrations. We multiply modeled direct contribution estimates with CCF to obtain revised contributions. Overall, the modeling system showed reasonably good performance, correlation coefficient R of 0.82 and normalized mean bias of 2%, although the model underestimated some PM species concentrations. We also noticed that model biases vary seasonally. We compared contribution estimates of major source sectors before and after applying CCFs. We observed that different source sectors showed variable magnitudes of sensitivities to the CCF application. For example, the total primary $PM_{2.5}$ contribution was increased $2.4{\mu}g/m^3$ or 63% after the CCF application. Out of a $2.4{\mu}g/m^3$ increment, line sources and area source made up $1.3{\mu}g/m^3$ and $0.9{\mu}g/m^3$ which is 92% of the total contribution changes. We postulated two major reasons for variations in estimated contributions after the CCF application: (1) monthly variability of unadjusted contributions due to emission source characteristics and (2) physico-chemical differences in environmental conditions that emitted precursors undergo. Since emissions-to-$PM_{2.5}$ concentration conversion rate is an important piece of information to prioritize control strategy, we examined the effects of CCF application on the estimated conversion rates. We found that the application of CCFs can alter the rank of conversion efficiencies of source sectors. Finally, we discussed caveats of our current approach such as no consideration of ion neutralization which warrants further studies.

• Journal of Communications and Networks
• /
• 제12권4호
• /
• pp.289-307
• /
• 2010

The problem of model selection arises in a number of contexts, such as subset selection in linear regression, estimation of structures in graphical models, and signal denoising. This paper studies non-asymptotic model selection for the general case of arbitrary (random or deterministic) design matrices and arbitrary nonzero entries of the signal. In this regard, it generalizes the notion of incoherence in the existing literature on model selection and introduces two fundamental measures of coherence-termed as the worst-case coherence and the average coherence-among the columns of a design matrix. It utilizes these two measures of coherence to provide an in-depth analysis of a simple, model-order agnostic one-step thresholding (OST) algorithm for model selection and proves that OST is feasible for exact as well as partial model selection as long as the design matrix obeys an easily verifiable property, which is termed as the coherence property. One of the key insights offered by the ensuing analysis in this regard is that OST can successfully carry out model selection even when methods based on convex optimization such as the lasso fail due to the rank deficiency of the submatrices of the design matrix. In addition, the paper establishes that if the design matrix has reasonably small worst-case and average coherence then OST performs near-optimally when either (i) the energy of any nonzero entry of the signal is close to the average signal energy per nonzero entry or (ii) the signal-to-noise ratio in the measurement system is not too high. Finally, two other key contributions of the paper are that (i) it provides bounds on the average coherence of Gaussian matrices and Gabor frames, and (ii) it extends the results on model selection using OST to low-complexity, model-order agnostic recovery of sparse signals with arbitrary nonzero entries. In particular, this part of the analysis in the paper implies that an Alltop Gabor frame together with OST can successfully carry out model selection and recovery of sparse signals irrespective of the phases of the nonzero entries even if the number of nonzero entries scales almost linearly with the number of rows of the Alltop Gabor frame.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.173-182
• /
• 2019

This study attempts to improve the understanding of the rapidly growing online video platform market such as Youtube and OTT, and to investigate the attributes and relative importance of them. For this purpose, the factors that influence the choice to use were derived through literature studies and the Focus Group Interview (FGI), and the priority of the factors was calculated through the analytic hierarchy process (AHP). The upper layer of the AHP structure was 'Relationship', 'Entertainment', 'Informativity', and 'Convenience', and the lower layer was structured into 13 elements. The importance priority analysis among the factors that influence the choice to use was done by teenagers, 20s, and 30s and the results are summarized as follows : First, Users consider the 'Just for fun' and 'Satisfaction of interests' as the most important factors, followed by 'Easy accessibility to use', 'Vicarious satisfaction', 'Usefulness of Information', and 'Up-to-dateness of information'. Second, the ranking of the upper layer was in the order of 'Entertainment'-'Informativity'-'Convenience'-'Relationship'.As a result of AHP,'Entertainment' was 3.6 times more important than 'Relationship'. In the comparison by age group, only teenagers regarded that 'Convenience' is more important than 'Informativity'. According to the characteristics of the age group, the lower layer of teenagers consider 'Convenient function' to be important and ranked 'Usefulness of information' in 8^th. While 'Vicarious satisfaction' ranked 4th out of 13 factors in the entire age group, those in their 20s and 30s ranked 8^th, showing a difference. In the case of 20s, 'Reasonable price' was ranked 4th and the 'Diversity of Information' was ranked 5th, Otherwise 30s consider 'Trustworthiness of Information' to the third. Third, unlike 'Convenience' which was the lower-rank in the upper layer AHP analysis, 'Easy accessibility to use', the lower-layer of convenience, ranked third overall in the importance analysis among the 13 lower-layer factors, and showed a similar patterns in the age groups results. In the conclusion, this study demonstrates that 'Convenience' and 'Vicarious satisfaction' factors, which were not relatively well addressed in the previous studies, are the key factors to be considered in. By presenting the results of the importance analysis on each of the selected attributes, This study has a practical implication that Industries such as on-line video service platform provider can use the importance priority in establishing the directions of future strategy.

• 한국수자원학회논문집
• /
• 제51권8호
• /
• pp.629-642
• /
• 2018

기후변화에 따른 강우특성의 변화 등 다양한 기상이변과 극한사상에 관련된 수자원 연구는 일반적으로 전지구 기후 모델(General Circulation Model, GCM) 산출물에 기반하여 생산된 미래 기상정보를 바탕으로 이루어진다. 사회 다양한 분야에서 기후변화 영향평가가 심층적으로 이루어지고 있는 가운데 과거기간에 대한 원시 모의결과 평가를 통한 GCM의 성능과 산출물에 대한 재현성 고찰 연구는 상대적으로 미흡한 실정이다. 본 연구에서는 한반도 지역에 대한 전지구 모델의 성능을 평가하기 위해 동아시아 지역의 격자단위 관측자료를 수집하여 과거기간(1970~2005)에 대한 강우특성 공간분포를 분석하고 이에 대한 GCM 산출물의 재현성을 평가하였다. 위도와 경도에 따른 강우특성의 공간적 변동성에 대한 GCM 결과의 상관성과 평균/절대오차를 산정하여 29개 CMIP5 GCM의 순위를 결정하여 제시하였다. 연구 결과 오차 통계와 대상지역에 따라 GCM 순위가 상이하게 나타났으며 특히 공간분포의 패턴과 절대적 오차를 기준으로 판단한 GCM 순위가 크게 다르게 나타났다. 대체로 Hadley Centre 계열 모델의 동아시아 지역에 대한 강우특성 재현성이 높게 나타났으며 한반도 지역만을 대상으로 평가한 경우 MPI_ESM_MR과 CMCC center 계열 모델의 재현성이 높게 나타났다. 본 연구결과는 향후 한반도 지역의 기후변화 영향평가에 가중있게 고려되어야 할 GCM의 선정과 GCM 성능고려에 따른 기후변화 예측 불확실성 평가에 적용될 수 있으며 다양한 영향 평가 연구결과의 신뢰도 제고에 기여할 것으로 기대된다.

• 간호행정학회지
• /
• 제4권1호
• /
• pp.5-17
• /
• 1998

The Purpose of this study is to find out differences among the leader's traits on the hierarchy of Nurse managers in Nurse system of the hospital. In this study 152 managers over head nurse working in 6 University hospitals and 5 general hospitals were selected and the questionary paper answered by them was collected from 1st to 30th in September in 1997. The measuring instrument used in this study is the one integrated and classified by Stogdill (1981), which nurse professor and 2 students of the master's course translated and modified with myself. And its validity was verified through making a test on 130 nurses. The measuring instrument used in this study is made up of 4 items about physical characteristics, 3 items about social background, 4 items about intelligence and ability, 17 items about personaity, 6 items about task-related characteristics, 9 items about social characteristics and 8 items about general background in the triats of leader. And this instrument is made to be marked using five point Likert type. It's reliability is Cronbach's Alpha =.93. The data for study were analyzed through SPSS/PC+ The result of this study are as follows: 1. The order in importantly perceptible degree of the leader's traits showed like these: the intelligence and ability (M=4.683), the task-related characteristics (M=4.605), the personality (M=4.39), the social characteristics (M=4.327), the social back-ground (M=4.056), the physical characteristics (M=3.601). 2. The order in degree to percept the importance of 44 detailed items of the leader's traits showed like these: the judgement and decisiveness (M=4.967), the sense of responsibility (M=4.904), the activity and energy (M=4.796), the self-confidence (M=4.776), the creativity (M=4.748), the intelligence (M=4.743), the responsibility in the pursuit of objectives (M=4.743), the enthusiasm (M=4.717), the objectivity (M=4.704), the moral sense and ethical conduct (M=4.704), the ability to enlist cooperation (M=4.694), the strength of conviction (M =4.678), the enterprise (M=4.691), the administrative ability (M=4.678) and the cooperativeness (M=4.638) 3. As the result of analyzing the leader's trait differences on the hierarchy of nurse managers in six factors of the leader's traits, the social background showed the meaningful differences(F=4.983, P=0.008). 4. As the result of analyzing the leader's traits defferences made from the upper first to 15th rank among the detailed items of the leader's trait factors on the heirarchy of nurse managers, the meaningful defferences appeared in the following items: the objectivity(F=3.413, P=0.033), the creativity (F=3.550, P=0.031), the sense of responsibility(F=3.345, P=0.049), and the administrative ability (F=3.363, P=0.037). 5. As the result of analyzing the leader's trait factors in general background, only the social background of 6 leader's trait factors showed the meaningful differences according to the working place (F=4.057, P=0.008). The study shows that we should consider the above leader's trait factors in selecting nurse managers and that we should develop the educational program for hierarchy of nurse managers urgently.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.832-845
• /
• 1998

The purpose of this study was to compare the marginal fit of all ceramic crowns prepared from alumina slip casting, which is consistent with the conventional In-ceram system, and those fabricated from alumina tapes which is currently under development in an effort to alleviate complexities involved in the forming procedure of the In-ceram crown core. All ceramic crowns, made of In-ceram(slip casting) and alumina tapes(Doctor blade casting), were prepared with $90^{\circ}\;and\;135^{\circ}$ shoulder margins. The crowns were cemented with a glass ionomer cement and embeded in epoxy resin. The embedded crowns were sectioned faciolingually and mesiodistally and marginal discrepancies and marginal gaps were measured under the Measurescope MM II. The measurements were analyzed using Wilcoxon rank sum test and Kruskal-Wallis test and the results were as follows: 1. In the case of $90^{\circ}$ shoulder margin, the combined marginal discrepancies and marginal gaps were $78.3{\mu}m\;and\;44.4{\mu}m$ respectively, for the all ceramic crowns fabricated using the alumina tapes. In comparison, the values were $65{\mu}m\;and\;25.5{\mu}m$ for the In-ceram crowns. For the marginal gaps a statistical difference existed (p<0.05) but no significant difference was observed for the marginal discrepancy (p>0.05). 2. In the case of $135^{\circ}$ shoulder margin, the combined marginal discrepancy and marginal gaps were $82.1{\mu}m\;and\;40.2{\mu}m$ respectively, for the all ceramic crowns formed with the tapes. As compared with the marginal discrepancy and gaps of the $90^{\circ}$ shoulder margin in the fabricated from the alumina tapes, no significant statistical differencies were discerned in both cases (p>0.05). 3. There was no statistically significant difference in the fits among four locations around the margins of the all ceramic crowns fabricated using the alumina tapes. The results obtained in this study showed that the marginal fits of the glass infiltrated alumina cores fabricated from the alumina tapes are slightly higher value than those prepared using the In-ceram but the difference is within a clinically acceptable range.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• Journal of Gastric Cancer
• /
• 제4권1호
• /
• pp.32-35
• /
• 2004

Purpose: The most important prognostic factors in gastric cancer is the depth of invasion of the primary tumor and lymph node metastasis. The nodal staging of the 5th edition of the Union Internationale Contrala Cancrums (UICC) TNM classification in 1997 was changed based on the number of metastatic lymph node. We attempted to evaluate the prognostic significance of N2 group metastasis in pT3pN1 gastric cancer patients by comparing two different nodal staging systems. Materials and Methods: A retrospective analysis was made for 352 gastric cancer patients who underwent curative resection, including D2 dissection, from 1991 to 1997 at Asan Medical Center. A clinicopathologic comparison between two groups by using a nodal staging systems was summarized into a table. Cumulative survival rates were calculated by using the Kaplan-Meier method. The difference between the two groups was evaluated by using the log rank test with SPSS 11.5 for Windows Results: There were no statistical differences in clinicopathologic factors. However, there was a significant difference in survival rate between the two groups (P=0.0009). This suggests that N2 group metastasis in pT3pN1 gastric cancer patients has a clinical significance for predicting prognosis. Conclusion: Our results suggest a possibility of prognostic significance of N2 group metastasis. Therefore, anatomical location of the lymph node should be described.

• 방송공학회논문지
• /
• 제14권6호
• /
• pp.661-675
• /
• 2009

인터넷과 멀티미디어 기술이 발달함에 따라 무분별한 불법 콘텐츠들의 유통으로 인한 저작권 침해가 심각한 사회적 문제로 대두되고 있어, 불법 복제 영상을 검출하는 시스템의 개발이 시급하다. 본 논문에서는 공간영역 상에서 다양하게 변형된 복제 영상과 원본 영상간의 통계적 특성을 이용하여 그 유사도를 측정하고 복제 여부를 판단하는 계층적 구조의 불법 비디오 감식 방법을 제안한다. 영상의 대표적 특성인 휘도 성분에 따라 순위를 매김으로써 공간적 변형에 영향을 받지 않도록 하였으며, 데이터베이스에 저장된 방대한 양의 영상들에 대한 검색시간과 계산량을 줄이기 위해 순위 표본 프레임을 이용하여 유사한 후보 영상군을 추출한다. 이러한 후보 영상군을 대상으로 일반적인 불법 복제 비디오의 형태를 감안하여 각 프레임의 가장자리에 위치한 검은색 영역을 제외함과 동시에 영상의 중앙 영역을 포함하여 통계 검정을 이용함으로써 복제 여부를 판단한다. 실험 결과, 제안하는 방법은 이전 방법에 비해 순위 표본 프레임의 정확도가 유사하면서 선택된 순위 표본 프레임 수가 약 61% 가량 적게 추출하여 특징 정보에 저장되는 메모리 양을 절약할 수 있었다. 또한 영상의 화질 열화, 대비 변형, 확대 및 축소, 화면비 변환, 자막 삽입 등 다양한 공간적 변형에도 포괄적으로 복제 여부를 판단할 수 있음을 실험을 통해 확인하였다.

• 정보화연구
• /
• 제9권2호
• /
• pp.155-166
• /
• 2012

최근 공공부문에서 EA(Enterprise Architecture)에 대한 관심이 다시 높아 졌다. EA성숙도 결과가 기관의 정보화 수준에 반영되고 비중도 커졌기 때문이다. EA발전에 대한 행정기관 정보화책임관의 참여도도 상승했다. 공공부문에서 EA연구가 '90년대 말부터 시작하여 '05년도 법제화, '06년도 성숙도 모델의 개발 등 제도화와 연계 되면서 IT 환경변화에도 많은 영향을 미치고 있다. 그러나 그간 도입 위주의 EA정책 추진, 전자정부 UN 평가 연속 1위 반열에서 EA역할 한계 노정, 사용자 친화적 대응체계 부족 등의 과제를 안고 있다. EA관련 연구측면에서도 모델과 성숙도 등 미시적 접근이 다수이고 공공정책으로 거시적 방향 제시는 드물다. 본 논문은 이러한 문제의식을 가지고 공공부문에서 향후 EA 정책방향을 어떻게 추진할 것인가에 대한 함의를 제공하고자 한다. 이를 위해서 EA 정책을 시계열적으로 조망하고 분석하고자 한다. 그리고 EA 정책과 기술, 지원시스템의 관점에서 그간의 성과를 분석하고 시사점을 제시한다. 아울러 EA와 관련된 이해당사자와 업무를 통해 나온 요구들을 각 영역별로 정리하고 그 성과와 향후과제들을 도출한다. 이런 결과를 통해 공공부문의 EA관련 이해당사자와 정보화관련 담당들에게 향후 EA추진에 대한 정책방향 설정을 지원함으로써 보다 효율적인 정보화 정책 추진에 도움을 주고자 한다.