• ETRI Journal
• /
• v.45 no.2
• /
• pp.329-337
• /
• 2023

For safe last-mile autonomous robot delivery services in complex environments, rapid and accurate collision prediction and detection is vital. This study proposes a suitable neural network model that relies on multiple navigation sensors. A light detection and ranging technique is used to measure the relative distances to potential collision obstacles along the robot's path of motion, and an accelerometer is used to detect impacts. The proposed method tightly couples relative distance and acceleration time-series data in a complementary fashion to minimize errors. A long short-term memory, fully connected layer, and SoftMax function are integrated to train and classify the rapidly changing collision countermeasure state during robot motion. Simulation results show that the proposed method effectively performs collision prediction and detection for various obstacles.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.88-98
• /
• 1994

A new local path planning algorithm for free-ranging robots is proposed. Considering that a laser range finder has the excellent resolution with respect to angular and distance measurements, a simple local path planning algorithm is achieved by a directional weighting method for obtaining a heading direction of nobile robot. The directional weighting method decides the heading direction of the mobile robot by estimating the attractive resultant force which is obtained by directional weighting function times range data, and testing whether the collision-free path and the copen parthway conditions are satisfied. Also, the effectiveness of the established local path planning algorithm is estimated by computer simulation in complex environment.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.127-128
• /
• 2006

In this paper, we propose a novel signaling method using chirp signals in UWB radio with satisfaction of FCC regulation. Chirp signals have been used in many ranging systems such as radar because of its good correlation properties. Because it is important to use broader signal bandwidth in order to get higher precision of the ranging, according to the Cramer-Rao Lower Bound, UWB radio is extremely good as the ranging systems. But, it is very difficult to apply existing chirp signals to UWB, because FCC regulates that the systems operating in UWB radio must occupy signal bandwidth more than 500MHz on the condition of stopping the frequency sweeping. So, we propose multiple chirp signals which can satisfy the regulation of FCC while maintaining chirp signal's properties. The multiple chirp signals which are composed of the sub-chirps modulated by sub-carriers can expand the signal bandwidth with the same principle of OFDM systems. The simulation results show that the BER performance of the proposed multiple chirp signals is identical to that of conventional OFDM when it is applied to data communication, and that the correlation properties of the proposed signals are almost the same with properties as those of single chirp signals whose sweeping bandwidth is the same value with the proposed one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.894-900
• /
• 2012

Indoor wireless positioning system uses ranging information of beacons in order to precisely estimate a tag location. To estimate distance between each beacons and tag, the system calculates arrival time of a tag pulse with clock of each beacon including independent clock offset. This clock offset seriously affects the performance of ranging and positioning. We propose in this paper a clock offset compensation method to solve this problem. To verify the performance of the proposed method, we simulated location estimation with random clock offset between -1,000ppm and 1,000ppm, and the result shows that the proposed scheme effectively solves the clock offset problem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.994-1001
• /
• 2009

CSS (Chirp Spread Spectrum) specified in IEEE 802.15.4a can be used for ranging applications. In this paper, we apply the CSS to estimate the coordinates of a mobile robot. Four anchor nodes are installed at known positions and a tag node is attached to the target mobile robot. By CSS ranging, we measure the distances between each anchor and the tag node. Based on the measured distances, the coordinates of the mobile robot can be calculated by the method of trilateration. However the calculated coordinates are not accurate because of the errors of the measured distances. Therefore we propose an algorithm for reducing the effect of the errors. The proposed algorithm is executed with the extended Kalman filter. Through localization experiments, we show the performance of the proposed algorithm and the accuracy of the estimated position.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.76-84
• /
• 1986

Analyses of lead and zinc were made by means of standard addition method using atomic absorption spectrophotometer(Baird Ltd., Model A5100) with flameless method for lead and flame method for zinc. The blood samples used were merely diluted with triton x-100, because it was simple, rapid and minimal risk of contamination. Mean recovery rate for lead added to the blood ranged from 97.7 to 101.3% with coefficient of variation ranging from 1.9 to 10.7%, and that for the added zinc ranged from 99.0 to 102.2% with coefficient of variation ranging from 2.1 to 9.1%. In repeated measurements of zinc in the blood, good reproducibility and interindividual variation were proved(p<0.01). In comparison of the lead and zinc concentrations in the blood determined by the standard addition method and standard method, there were good correlations between 2 sets of data (r=0.9731 for lead and r=0.9785 for zinc), although lead levels were estimated higher by the former method(p<0.01) and zinc levels by the latter method(p<0.01). It can be concluded that lead and zinc levels in blood standard addition method is reliable for determination of lead and zinc in the blood with good accuracy and reproducibility.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.13-25
• /
• 2008

In this paper, we propose the Location Awareness System adjusting Ranging Technology for CSS(Chirp Spread Spectrum) which is adopted on 2.45GHz standard in IEEE 802.15.4a and TOA(Time-of-Arrival) algorithm. The conventional methods have adopted RSSI, ultrasonic waves and infrared rays in Zigbee. RSSI measures strength indication of received signal and recognizes the position of nodes in RF boundary. However, this technology has the following problems; lots of error by the change of the channel environment and much power consumption. In this paper, adopting chirp pulse on 2.45GHz standard in IEEE 802.15.4a and SDS-TWR(Symmetrical Double Side-Two Way Ranging) method using the characteristic of Spread Spectrum, a new Location Awareness System is suggested. The distance and the coordinate are measured within ${\pm}\;5cm$ by TOA(Time of Arrival) algorithm and proposed algorithm and the data in error rate is decreased less than 1%. Through these results, the algorithm suggested in this paper is verified for its performance in a computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.145-152
• /
• 2009

Ultra-wideband communication systems for impulse radio have merits that are possible for either high resolution ranging system or radio determination. Conventionally, in order to accomplish these functions, the rapid analog to digital convertor (ADC) is necessary to apply radio determination system operating in time domain. However, considering that low rate - wireless personal area network (LR-WPAN) aims to low-cost hardware implementation, the expensive ADC converting GHz sampling per second is not appropriate. So, this paper introduces the high resolution ranging system operating in frequency domain with using low sampling rate ADC, and a new non-coherent ranging scheme utilizing analog Frequency Modulation (FM) mode for the frequency domain transformation. To verify the superiority of the proposed ranging algorithm working in frequency domain, the suggested IEEE 802.15.4a TG channel model is used to exploit affirmative features of the proposed algorithm with conducting the simulation results.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.78-87
• /
• 2008

Received signal strength indicator (RSSI) is used as one of the ranging techniques to locate dynamic sensor nodes in wireless sensor network. Before it can be used for position estimation, RSSI values must be converted to distances using path loss model. These distances among sensor nodes are combined using trilateration method to find position. This paper presents an idea which attempts to integrate both path loss model and trilateration as one algorithm without going through RSSI-distance conversion. This means it is not simply formulas combination but a whole new model was developed. Several advantages were found after integration: it is able to reduce processing load, and ensure that all values do not exceed the maximum range of 16-bit signed or unsigned numbers due to antilog operation in path loss model. The results also show that this method is able to reduce estimation error while inaccurate environmental parameters are used for RSSI-distance conversion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.622-628
• /
• 1998

The SONAR(SOund NAvigation and Ranging) is the system that detects objects and finds their locations in water by using the echo ranging technique. In this paper, the scattering phenomena for a rigid spherical scatterer will be analyzed using closed form solution, Boundary Element Method and Finite Element Method. Scattering analysis for an elastic spherical scatterer will be analyzed, later. In oder to analyzing the sound wave scattering phenomena for an elastic scatterer in water coupled problem between acoustic and vibration must be considered.