• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.34-47
• /
• 1995

It is experienced fact as a regular annual event that the structure to he designed on unreasonable flood for the agricultural structures including reservoirs have been brought not only loss of lives, but also enormous property damage. For the solution of this problem at issue, this study was conducted to develop an optimal runoff hydrograph model by comparison of the peak flows and time to peak between observed and simulated flows derived by linear time-invariant and linear time-variant models under the condition of having a short duration of heavy rainfall with uniform rainfall intensity at nine small watersheds which are within the range of 55.9 to 140.7 square kilometers in area in Han, Geum, Nagdong and Yeongsan Rivers. The results obtained through this study can be summarized as follows. 1. Storage constants and Gamma function arguments were calculated within the range of 1.2 to 6.42 and of 1.28 to 8.05 respectively by the moment method as the parameters for the analysis of runoff hydrograph based on linear time-invariant model. 2. Parameters for both linear time-invariant and linear time-variant models were calibrated with nine gaged watershed data, using a trial and error method. The resulting parameters including Gamma function argument, N and storage constant, K for linear time-invariant model were related statistically to watershed characteristic variables such as area, slope, length of main stream and the centroid length of the basin. 3. Average relative errors of the simulated peak discharge of calibrated runoff hydrographs by using linear time-variant and linear time-invariant models were shown to be 0.75 and 5.42 percent respectively to the peak of observed runoff hydrographs. Correlation coefficients for the statistical analysis in the same condition were shown to be 0.999 and 0.978 with a high significance respectively. Therefore, it can be concluded that the accuracy of a linear time-variant model is approaching more closely to the observed runoff hydrograph than that of a linear time-invariant model in the applied watersheds. 4. Average relative errors of the time to peak of calibrated runoff hydrographs by using linear time-variant and linear time-invariant models were shown to be 16.44 and 19.89 percent respectively to the time to peak of observed runoff hydrographs. Correlation coefficients in the same condition were also shown to be 0.999 and 0.886 with a high significance respectively. 5. It can be seen that the shape of simulated hydrograph based on a linear time- variant model is getting closer to the observed runoff hydrograph than that of a linear time-invariant model in the applied watersheds. 6. Two different models were verified with different rainfall-runoff events from data for the calibration by relative error and correlation analysis. Consequently, it can be generally concluded that verification results for the peak discharge and time to peak of simulated runoff hydrographs were in good agreement with those of calibrated runoff hydrographs.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.149-156
• /
• 2013

In this paper, Commercial program, STAR-CCM+, was used for computer simulation. And also Multi Inner Stage(MIS) cyclone which especially designed for the real experiments of particle removal efficiency. Under negative pressure condition of outlet, computer simulation was performed to predict the removal efficiency for $5{\mu}m$ and $10{\mu}m$ particles by using a turbulence model and lagrangian method. The simulation results are 55.7% and 64.1% for $5{\mu}m$ and $10{\mu}m$ particles, respectively. To compare the simulation results with the actual test of MIS cyclone, we generated the $SiO_2$ particles by heat reactor. Although removal efficiency of actual tests is 63~76% at different flow rate, the size of $SiO_2$ particles which confirmed by SEM(scanning electron microscope) and WAPS(wide range aerosol particle spectrometer) is too small(15~30nm) to compare each results. And so the alternative experiments were performed by using commercial alumina particles ($5{\mu}m$, $10{\mu}m$ and $20{\mu}m$). It was shown that the actual removal efficiency, 76~95%, from MIS cyclone is higher than simulated one.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.4
• /
• pp.300-318
• /
• 2019

Many infraspecific taxa within Lespedeza maximowiczii and hybrids with related species have been described, but taxonomic verification remains controversial. We examined the morphological traits of hybrids (L. chiisanensis and L. patentibicolor) and infraspecific taxa (var. tomentella, elongata, and tricolor) and analyzed their genetic structures using microsatellite loci. Flower and leaflet shapes in var. tomentella and elongata were within the range of variation of those in var. maximowiczii, and individuals in the two former varieties were grouped into var. maximowiczii. Lespedeza maximowiczii var. tricolor was similar to L. buergeri in terms of the structure and flower color, whereas the leaflet and bracteole shapes of var. tricolor were similar to those of var. maximowiczii. Based on the genetic structure (K = 3), var. tricolor had a mixed lineage with L. maximowiczii and L. buergeri. In addition, these formed a distinct lineage at K = 5. For two hybrids, the flower and leaflet structure in L. chiisanensis did not differ from those in L. maximowiczii, whereas the flowers of L. patentibicolor were within the range of variation of L. bicolor. In addition, L. chiisanensis and L. patentibicolor were assigned to L. maximowiczii and L. bicolor, respectively, based on the genetic structure. We treated var. tomentella and elongata as a forma, f. friebeana, because L. friebeana preceded var. tomentella, whereas var. tricolor was treated as a distinct species, L. tricolor. Lespedeza chiisanensis was recognized as a synonym of L. maximowiczii. Lespedeza patentibicolor was considered to be L. bicolor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.688-694
• /
• 2018

The mixture ratio of two-component liquid silicone is important for the inherent physical characteristics of the finished product. Therefore, it is necessary to uniformly control the ratio of the main material and the sub-material. In this paper, a mixing-ratio control system was designed, which consists of a digital flow meter and a flow control system to measure the flow rate of the raw materials and a pumping system to maintain constant pressure and transfer of the raw materials. In addition, a program was developed to control the organic interlocking and mixing ratio. For the verification of the developed system, we compared the actual weight of raw material with the value measured by the flow meter during pumping, and we measured the physical properties of the mixed material by making test samples with and without the application of the mixing-ratio improvement algorithm. The measured value was close to the reference value with a hardness range of 46-47 and tensile strength of 9.3-9.5 MPa. These results show that the mixing ratio of the liquid silicone is controlled within an error range of ${\pm}0.5%$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.13-20
• /
• 2022

Aircraft weight is an important factor affecting performance and fuel efficiency. In the conceptual design stage of the aircraft, the process of balancing cost and weight is performed using empirical formulas such as fuel consumption cost per weight in estimating element weight. In addition, when an airline operates an aircraft, it promotes fuel efficiency improvement, fuel saving and carbon reduction through weight management activities. The relationship between changes in aircraft weight and changes in fuel consumption is called the cost of weight, and the cost of weight is used to evaluate the effect of adding or reducing weight to an aircraft on fuel consumption. In this study, the problems of the existing cost of weight calculation method are identified, and a new cost of weight calculation method is introduced to solve the problem. Using Breguet's Range Formula and actual flight data of the A350-900 aircraft, two weight costs are calculated based on take-off weight and landing weight. In conclusion, it was suggested that it is reasonable to use the cost of weight based on the take-off weight and the landing weight for other purposes. In particular, the cost of weight based on the landing weight can be used as an empirical formula for estimating element weight and optimizing cost and weight in the conceptual design stage of similar aircraft.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.55-61
• /
• 2023

Purpose In this study, the monthly population distribution was calculated for statistical verification of 10 tests (CA19-9, CA15-3, testosterone, PTH, calcitonin, AFP, CEA, CA72-4, PSA, estradiol) with changed reagents, and the trend of change By comparing and analyzing the results, we want to verify the accuracy of the results and improve the reliability of the test. Materials and Methods From June 2021 to February 2023, for the 10 items in which the reagent was changed, the monthly percentage and standard deviation index before and after the reagent change were compared, respectively. At this time, the reference value was arbitrarily set for the comparison group in consideration of the reference value of the test item, and the groups were subdivided and compared, and the standard deviation index allowed range was -2.0 or more and 2.0 or less. Results For CA19-9, CA15-3, AFP, CEA, and calcitonin 5 test items, the change in monthly ratio in all test sections before and after the reagent change was kept constant. On the other hand, for CA72-4, PSA, testosterone, PTH, and estradiol items, the standard deviation index exceeded the acceptable standard after changing the reagent. CA72-4 test items showed an increasing trend in standard deviation index in the test section exceeding the reference value. In the case of the PSA test item, the maintenance ratio of 0.04 ng/mL was significantly decreased after changing the reagent. The testosterone test item had a standard deviation index of -2.5 in the test section exceeding 10.1 ng/mL after changing the reagent, and the standard deviation index of the PTH test item was out of the acceptable range in all test sections. It was confirmed that the estradiol test item showed an overall increase in the result value. Conclusion Through this study, the continuity and accuracy of the test results could be verified. It is considered that the stability of the test can be secured by analyzing the factors affecting the test result and solving the cause for the test item whose standard deviation index is out of the acceptable standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.235-242
• /
• 2008

Due to the lack of judgement in an information processing on road sign, older drivers usually are having a hard time driving than young group. Furthermore, according to increasing in aging population, older drivers in Korea have been growing much faster. That means research for older drivers' characteristics and the number of guide name for road sign should be needed. In accordance with suggestions, this study was carried out the number of guide names for road sign with a variety of ages from the twenties to the seventies. For the sake of this study, statistical verification was conducted to confirm a change of speed, a reading time and a misreading rate with Driving Simulator and Electrooculogram tool. As the results of study, change of speed in the age range has shown that the higher the proportion of age, the lower the rate of velocity. Also reading time in the age range with regression analysis found that the higher the proportion of age, the higher the rate of reading time by 0.106sec. Finally, a binary logistic model was used to find the main factors. As the results, 4 number of guide names for road sign have been the best of them for older driver. The result of this study verified the importance of ideal guide numbers on road sign for older driver and proved itself to be an effective method to determine the road safety for the road signs.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.107-118
• /
• 2019

Two assertions about the process the formation of the high-purity limestone in the Taebaeksan Basin, categorized into syngenetic and epigenetic origin, are verified on the basis of its oxygen-carbon stable isotopic characteristics. The carbonate rocks sampled from the selective six high-purity limestone mines and several outcrops in the Daegi formation are featured by various colors such as the gray, light gray and dark gray. They show a wide range of oxygen stable isotope ratios (4.5 ~ 21.6 ‰), but a narrow range of carbon stable isotope ratios (-1.1 ~ 0.8 ‰, except for vein calcite), which means that they had not experienced strong hydrothermal alteration. In addition, there is no difference in the range of the oxygen stable isotope ratios by mine and color, and it is similar to the range from surrounding outcrop samples. These results indicate that the effect of the hydrothermal alteration were negligible in the generation of high-purity limestone in deposit scale. Whereas, the carbonate rocks can be divided texturally into two groups on the basis of an oxygen isotope ratio; the massive-textured or well-layered samples (>15 ‰), and the layer-disturbed (or layer-destructed) and showing over two colors in one sample (<15 ‰). In the multi-colored samples, the bright parts are characterized by the very low oxygen stable isotope ratios, compared to the dark parts, implying the increase in brightness of the carbonate rocks could be induced by the interaction between hydrothermal fluid and rock. However, these can be applied in a small scale such as one sample and are not suitable for interpretation of the generation of high-purity limestone as a deposit scale. In particular, the high oxygen isotope ratios from the recrystallized white limestone suggest that hydrothermal fluids are also rarely involved during recrystallization process. In addition, the occurrences of the high-purity limestone orebody strongly support the high-purity limestone in the area are syngenetic rather than epigenetic; the high-purity limestone layers in the area show continuous and almost horizontal shapes, and is intercalated between dolomite layers. Consequently, the overall reinterpretation based on the sequential stratigraphy over the Taebaeksan basin would play an important role to find additional reserves of the high-purity limestone.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.327-337
• /
• 2022

Ecological restoration is considered a good means to prevent biodiversity loss in terms of the ecosystem's health and sustainability. However, there are difficulties in putting it into practice as there is no comprehensive and objective standard for the selection of plant species, such as environmental, ecological factors, and restoration goal setting. Therefore, this study developed an evaluation index necessary for selecting plant species for restoration using the Delphi method that synthesizes the opinions of the expert group. A survey with 38 questionnaires was conducted twice for experts in ecological restoration, etc., and the importance and priority of evaluation indicators were analyzed by dividing the restoration targets into inland and island regions. The result of the importance analysis showed that "native plants" had the highest average of 4.9 among the evaluation indices in both inland and island regions, followed by "seed security", "propagation", and "root growth rate". In the inland region, the index priority was analyzed in the order of "native plants", "appearance frequency", "root growth rate", "distribution range", and "seed security" in the island region, it was analyzed in the order of "native plants", "root growth rate", "appearance frequency", "distribution range", and "tolerance", showing slight differences between the two indicators. As a result of the importance and priority indicator analysis, we set the mean importance and priority of 4.1 and 2.9, respectively, in the inland region and 4.2 and 2.9, respectively, in the island region. As for the criteria of selecting plant species for ecological restoration, the "native plants" had the highest importance and priority. "Seed securing", 'viability", "topography", "proliferation", "tolerance", "soil conditions", "growth characteristics", "early succession", "distribution range", "appearance frequency", and "germination rate" were classified into subgroups of low importance and priority. The lowest indicators were "final stage of succession", "transition period", 'transition stage", "root", "reproduction", "soil", "appearance", "technology", "landscape", "climate", and "germination rate". We expected that the findings through objective verification in this study would be used as evaluation indicators for selecting native plant species for ecological restoration.

• Journal of Distribution Research
• /
• v.16 no.1
• /
• pp.141-177
• /
• 2011

I. Research Objectives: Most of the previous studies on diffusion have concentrated on efficacy of WOM communication with the use of variables at individual level (Iacobucci 1996; Midgley et al. 1992). However, there is a paucity of studies which investigated network's structural properties as antecedents of WOM from the perspective of consumers' sociocultural propensities. Against this research backbone, this study attempted to link the network's structural properties and consumer' WOM behavior on cross-national basis. The major research objective of this study was to examine the relationship between network properties and WOM by comparing Korean and Chinese consumers. Specific objectives of this research are threefold; firstly, it sought to examine whether network properties (i.e., tie strength, centrality, range) affect WOM (WOM intention and quality of WOM). Secondly, it aimed to explore the moderating effects of cutural orientation (uncertainty avoidance and individuality) on the relationship between network properties and WOM. Thirdly, it substantiates the role of innovativeness as antecedents to both network properties and WOM. II. Research Hypotheses: Based on the above research objectives, the study put forth the following research hypotheses to validate. ${\cdot}$ H 1-1 : The Strength of tie between two counterparts within network will positively influence WOM effectivenes ${\cdot}$ H 1-2 : The network centrality will positively influence the WOM effectiveness ${\cdot}$ H 1-3 : The network range will positively influence the WOM effectiveness ${\cdot}$ H 2-1 : The consumer's uncertainty avoidance tendency will moderate the relationship between network properties and WOM effectiveness ${\cdot}$ H 2-2 : The consumer's individualism tendency will moderate the relationship between network properties and WOM effectiveness ${\cdot}$ H 3-1 : The consumer's innovativeness will positively influence the social network properties ${\cdot}$ H 3-2 : The consumer's innovativeness will positively influence WOM effectiveness III. Methodology: Through a pilot study and back-translation, two versions of questionnaire were prepared, one in Korean and the other in Chinese. The chinese data were collected from the chinese students enrolled in language schools in Suwon city in Korea, while Korean data were collected from students taking classes in a major university in Seoul. A total of 277 questionnaire were used for analysis of Korean data and 212 for Chinese data. The reason why Chinese students living in Korea rather than in China were selected was based on two factors: one was to neutralize the differences (ie, retail channel availability) that may arise from living in separate countries and the second was to minimize the difference in communication venues such as internet accessibility and cell phone usability. SPSS 12.0 and AMOS 7.0 were used for analysis. IV. Results: Prior to hypothesis verification, mean differences between the two countries in terms of major constructs were performed with the following result; As for network properties (tie strength, centrality and range), Koreans showed higher scores in all three constructs. For cultural orientation traits, Koreans scored higher only on uncertainty avoidance trait than Chinese. As a result of verifying the first research objective, confirming the relationship between network properties and WOM effectiveness, on Korean side, tie strength(Beta=.116; t=1.785) and centrality (Beta=.499; t=6.776) significantly influenced on WOM intention, and similar finding was obtained for Chinese side, with tie strength (Beta=.246; t=3.544) and centrality (Beta=.247; t=3.538) being significant. However, with regard to WOM argument quality, Korean data yielded only centrality (Beta=.82; t=7.600) having a significant impact on WOM, whereas China showed both tie strength(Beat=.142; t=2.052) and centrality(Beta=.348; t=5.031) being influential. To answer for the second research objective addressing the moderating role of cultural orientation, moderated regression anaylsis was performed and the result showed that uncertainty avoidance moderated between network range and WOM intention for both Korea and China, But for Korea, the uncertainty avoidance moderated between tie strength and WOM quality, while for China it moderated between network range and WOM intention. And innovativeness moderated between tie strength and WOM intention for Korea but it moderated between network range and WOM intention for China. As a result of analysing for third research objective, we found that for Korea, innovativeness positively influenced centrality only (Beta=.546; t=10.808), while for China it influenced both tie strength (Beta=.203; t=2.998) and centrality(Beta=.518; t=8.782). But for both countries alike, the innovativeness influenced positively on WOM (WOM intention and WOM quality). V. Implications: The study yields the two practical implications. Firstly, the result suggests that companies targeting multinational customers need to identify segments which are susceptible to the positive WOM and WOM information based on individual traits such as uncertainty avoidance and individualism and based on that, develop marketing communication strategy. Secondly, the companies need to divide the market on Roger's five innovation stages and based on this information, enforce marketing strategy which utilizes social networking tools such as public media and WOM. For instance, innovator and early adopters, if provided with new product information, will be able to capitalize upon the network advantages and thus add informational value to network operations using SNS or corporate blog.