• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.19-27
• /
• 2017

In recent years, ground subsidence has been frequently occurred by underground cavities due to the excessive groundwater inflow, caused by poor construction and management, during tunnel excavation and underground structure construction. In this study, a numerical model (SEEFLOW3D) was developed to estimate groundwater fluctuations for saturated-unsaturated poros media, evaluates the impact on ground excavation with open cut and non-open cut scenarios. In addition, the visual MODFLOW was applied to demonstrate the verification of the model compared with both results. Our results indicated that the RMSE and NRMSE was obtained to range over -3.95~5.7% and 0.56~4.62%, respectively. The developed model was expected to estimate groundwater discharges and apply analysis tool for optimum design of waterproof wall in future.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.57-65
• /
• 2003

When a vision chip for edge detection using CMOS process is designed, there is a necessity to implement local light adaptive-function for detecting distinctive features of an image at a wide range of light intensities. Local light adaptation is to achive the almost same output level by changing the size of receptive-fields of the local horizontal cell layers according to input light intensities, based on the lateral inhibitive-function of the horizontal cell. Thus, the almost same output level can be obtained whether input light intensities are much or less larger than background. In this paper, the horizontal cells using a resistive network which consists of p-MOSFETs were modeled and analyzed, and the local light adaptive-mechanism of the designed vision chip using the resistive network was verified.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.6
• /
• pp.43-49
• /
• 2018

In this paper, we propose a taping therapy as effective intervention for patients with the back pain. The purpose of this study is to investigate the effects of taping intervention on the VAS evaluated score and he muscular activation degree among 119 paramedics with musculoskeletal injury. In order to achieve the purpose of the study, data was collected from 15 paramediecs in the paramedics department of 3 fire stations under J city's fire defense headquarters. The following results can be obtained by measuring the subjective, the back muscle strength and the buckling-anteflexion before and after the taping for 15 119 paramedics. Through the verification experiment of taping effect to paramedics during the stretcher lifting in this study the VAS evaluated score for the backache are $1.67{\pm}0.62$ before and $0.80{\pm}0.68$ after the application of taping which show statistically significant decrease(p<0.05). In the experimentof joint operation range the measured buckling anteflexion length are $14.62cm{\pm}4.89$ before and $16.41cm{\pm}4.11cm$ after the application of taping which show statistically meaningful difference(p<0.05). In the comparison of muscle activity about paramedics erector spinae(ES) shows the meaningful decrease and external obliques(EO) displays the significant increase. Erector spinae(ES) and internal obliques(IO) show the increasing trend in the muscle activity although they are not significant. the muscle activity for the erector spinae is lowered so that the contribution to the force required for the extensor during the stretcher lifting is resultingly reduced to have the effects of enhancing the activity of abdominal muscles.

• Journal of Convergence Society for SMB
• /
• v.6 no.1
• /
• pp.7-15
• /
• 2016

As most devices in a wide range of automotive, aerospace, and missile have built-in software that controls the system behaviors, the safety of the software is growing in its importance. That is, the software safety has emerged as one of big issues because the threat of accidents caused by software malfunction is rising. Accident by software can be occurred from user mal-operation, but the fundamental reason of the accident comes from insufficient verification of the safety in software development process. Therefore, this paper presents how the software safety analysis and management activities should be done in the development process. In particular, we propose how to apply the safety analysis and management activities in the prototype or incremental development process.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.43-53
• /
• 2018

It is important to clarify the characteristics of flow regimes underlying the debris bed formation behavior that might be encountered in core disruptive accidents of sodium-cooled fast reactors. Although in our previous publications, by applying dimensional analysis technique, an empirical model, with its reasonability confirmed over a variety of parametric conditions, has been successfully developed to predict the regime transition and final bed geometry formed, so far this model is restricted to predictions of debris mixtures composed of spherical particles. Focusing on this aspect, in this study a new series of experiments using nonspherical particles have been conducted. Based on the knowledge and data obtained, an extension scheme is suggested with the purpose of extending the base model to cover the particle-shape influence. Through detailed analyses and given our current range of experimental conditions, it is found that, by coupling the base model with this scheme, respectable agreement between experiments and model predictions for the regime transition can be achieved for both spherical and nonspherical particles. Knowledge and evidence from our work might be utilized for the future improvement of design of an in-vessel core catcher as well as the development and verification of sodium-cooled fast reactor severe accident analysis codes in China.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1297-1302
• /
• 2018

Propose of this study was to compared and analyzes the cranking between the newly developed hand cycle prototype and the hign-end hand cycle that are sold on the market for the disabled athletes. For this study, 10 male subjects, who had the same type of disability, were selected from the Korea Disabled Cycle Federation. 12 infrared camera(Oqus-500) was utilized to acquire the subjects' kinematic data. we have analyzed the data of 30 seconds - 15 seconds before and after cranking. SPSS 16 was used for a statistical verification and the difference of the sports biomechanical variable between RX and the prototype was verified by utilizing pared samples t-test. The significance level at the time of the experiment was ${\alpha}=.05$. The results show that there is a need to design the hand cycle crank in a curve shape to lessen the muscle fatigue that is measured the highest between the angle of 180 to 195. In addition, comparative analysis between the existing data and the data of modified crank must be researched since the hand cycle cranking is one of the main variables in performance enhancement.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.169-174
• /
• 2008

Recently, biometric systems are of interest for the reliable security system. Iris recognition technology is one of the biometric system with the highest reliability. Various iris recognition methods have been proposed for automatic personal identification and verification. These methods require accurate iris segmentation for successful processing because the iris is a small part of an acquired image. The iris boundaries have been parametrically modeled and subsequently detected by circles or parabolic arcs. Since the iris boundaries have a wide range of edge contrast and irregular border shapes, the assumption that they can be fit to circles or parabolic arcs is not always valid. In some cases, the shape of a dilated pupil is slightly different from a constricted one. This is especially true when the pupil has an irregular shape. This is why this research is important. This paper addresses how to accurately detect iris boundaries for improved iris recognition, which is robust to noises.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.14 no.1
• /
• pp.1-10
• /
• 1977

The major objects of this report are to supplement data of natural frequencies of thin elastic rectangular plates to the available data, and to give an experimental verification for natural frequencies obtained by Rayleigh-Ritz method, the generation set of which are eigenfunctions of Euler beams. For the first object the following five models, for which data only for the fundamental mode or data only for square plates are available, are adopted; (1) two opposed edges are clamped and the other two opposed edges simply supported (C-C, S-S), (2) one edge is simply supported and the other three edges clamped (C-C, C-S), (3) one edge is free and the other three edges clamped (C-C, C-F), (4) two adjacent edges are clamped and the other two adjacent edges free (C-F, C-F). For the (C-C, S-S) model the frequency equation obtained with the mode shapes assumed as of a single trigonometric series is solved. And for the other four models Rayleigh-Ritz method taking eigenfunctions of Euler beams as the generating set is applied. The numerical examples are obtained up to the fourth, the fifth or the sixth order depending on the range of the aspect ratio (0.1-10.0). The number of terms in the generating set for Rayleigh-Ritz method is fifteen for all models. For the experiment three models made of 3.2mm thickness mild steel plate for general structure use were prepared in following size; $300mm{\times}600mm,\;600mm{\times}600mm\;and\;900mm{\times}600mm$. Their boundary conditions are made to fit (C-C, C-F) condition. From the experiment mechanical impedance curves based on the frequency response method were obtained together with phase relation diagrams. The experimental data are resulted in good conformity to calculated values.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.49-57
• /
• 2002

Including RF Package inductance, substrate coupling through conductive silicon(Si)-substrate is modeled and quantitatively characterized. 2-port substrate coupling model is extended for the characterization of multi-port substrate coupling between digital circuit block and analog/RF circuit block. Furthermore, scalable parameter extraction model is developed. Multi-port substrate coupling can be investigated by linearly superposing a frequency-dependent 2-port substrate coupling model using scalable parameters. In addition, Substrate coupling including RF package inductance effect is quantitatively investigated. It is shown that package effect increases substrate coupling and shifts a characteristic frequencies(i.e., poles) to the higher frequency range. The proposed methodology can be efficiently used to the mixed-signal circuit performance verification.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.19-33
• /
• 1997

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.