• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.137-146
• /
• 2012

This study introduced the concept of Primacy Effect for the analysis of the observation characters by time so as to analyze the characters of information which the users observing the lobby in a public space get when they encounter the space. From the viewpoint that the first impression on any space can motivate the judgement of space and continuous activities, the time range with the observation characters which can be regarded as Primacy Effect was analyzed in the aspects of continuity and saccade. First, with the case of alignment by time on three times of continuous observation, the perception attributes of subjects were shown to be very different among one another depending on which time range was applied for alignment. Second, the subjects with low average value of continuous observation times were found to be relatively stable in "ii~iii time ranges" and the time range of "0~5.10 seconds" was known to be the time range of relatively stable analysis for the characters of subjects' primacy effect to be analyzed. Third, the change of the amount of acquired information could be examined concretely through the analysis of observation attributes by time range, and the time range of "iii time range" showed more stable changing characters than other time ranges. Fourth, in the "iii time range" set up as a proper time range for the analysis of primacy effect had higher average value of 3.9 times of observation frequency compared with 6 times of continuous observation. As a grand average, 6 times(19.3) of average observation value was between 3 times(21.3) and 9 times(16.9), which enabled to set up 6 times of continuous observation as the number of observation times for stable analysis of primacy effect.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.539-543
• /
• 2005

The research presented in this paper enables real-time 3D modeling to help make construction processes ultimately faster, more predictable and safer. Initial research efforts used an emerging sensor technology and proved its usefulness in the acquisition of range information for the detection and efficient representation of static and moving objects. Based on the time-of-flight principle, the sensor acquires range and intensity information of each image pixel within the entire sensor's field-of-view in real-time with frequencies of up to 30 Hz. However, real-time working range data processing algorithms need to be developed to rapidly process range information into meaningful 3D computer models. This research ultimately focuses on the application of safer heavy equipment operation. The paper compares (a) a previous research effort in convex hull modeling using sparse range point clouds from a single laser beam range finder, to (b) high-frame rate update Flash LADAR (Laser Detection and Ranging) scanning for complete scene modeling. The presented research will demonstrate if the FlashLADAR technology can play an important role in real-time modeling of infrastructure assets in the near future.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.294-297
• /
• 2005

Time series are comprehensively appeared and developed in many applications, ranging from science and technology to business and entertainrilent. Similarity search under time warping has attracted much interest between the time series in the large sequence databases. DTW (Dynamic Time Warping) is a robust distance measure and is superior to Euclidean distance for time series, allowing similarity matching although one of the sequences can elastic shift along the time axis. Nevertheless, it is more unfortunate that DTW has a quadratic time. Simultaneously the false dismissals are come forth since DTW distance does not satisfy the triangular inequality. In this paper, we propose an efficient range query algorithmbased on a new similarity search method under time warping. When our range query applies for this method, it can remove the significant non-qualify time series as early as possible before computing the accuracy DTW distance. Hence, it speeds up the calculation time and reduces the number of scanning the time series. Guaranteeing no false dismissals, the lower bounding function is advised that consistently underestimate the DTW distance and satisfy the triangular inequality. Through the experimental result, our range query algorithm outperforms the existing others.

• 한국실내디자인학회논문집
• /
• 제20권6호
• /
• pp.183-191
• /
• 2011

This study is to set up the appropriate range of observation time through contemplating the characteristics of observation time run for the information acquisition of space. The conclusions reached through this study are as the followings. First, this study could find out that even though the evaluation elements on the three types for image evaluation were the same, the information acquisitions were different as those types varied. On the other hand, the change of the average run-time by type for the information acquisition was found not to be big, in other words, even though the run-time was alike, the information acquisitions varied depending on the type. Second, he evaluation by language media showed the average value by element had the order of [shape>position>number>existence] and the range of their run-time was 94.6~102.9 seconds. The average rate of information acquisition shown at the visual media had the order of [composition>shape>material&color] and the range of run-time was 93.1~99.7 seconds. Third, the evaluation by language media showed that for male subjects the range of information acquisition rate was 39.1~91.4% and that of run-time 85.1~106.0 seconds and for female ones 46.0~94.6% and 96.3~112.3 seconds respectively. In case of the visual media, male subjects showed the range of information acquisition rate was 40.3-66.7% and the range of run-time 82.4~97.9 seconds and the female ones, 42.2~71.0% and 94.0~115.1 seconds respectively, through which we could see that at the evaluation by language media and visual media both the female's range of information acquisition and that of observation time were higher than the male's.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.946-952
• /
• 2002

The electrical and dielectric characteristics of ZPCCY-based varistor ceramics were investigated in the sintering time range of 1∼3 h. Increasing sintering time deteriorated the nonlinearity, in which nonlinear exponent is decreased from 51.2 to 23.8 and leakage current is increased from 1.3 to 5.6 $\mu$A. As sintering time increases, the donor concentration was decreased in the range of (1.25∼l.73)$\times$10$\^$18/cm$\^$-3/ and the density of interface states is (3.64∼94.19)$\times$10$\^$12/cm$\^$-2/ with increasing sintering time. The increase in sintering time caused tan $\delta$ to increase in the range of 0.043 to 0.062 and relaxation time to increase in the range of 1.55 to 2.23 ㎲.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2789-2800
• /
• 1996

Real time fractal coding for successive QCIF 144*176 luminance images has been implemented on a 50MHz IBM 486 personal computer. To satisfy the frame encoding speed and data compression ratio, following algorithms are adopted. In order to minimize encoding time, extension SAS being not searching of domain blocks is used. for reducing the bits per pixel, conventioal 4*4 range block is extended to 8*8 range block. and range block extension decrease quality of decoded image. For improvement quality of decoded image, the paper apply quad-tree partition mothod. In order to divide **8 range block, self-simiarity is compared 8*8 range block with spatial contractive transformed 8*8 domain block. According to self-simiarity, the block is partitioned and owing to block partition, increased encoding time is minimized. According to self-simiarity of 8*8 range block and spatial contractive transformed 8*8 domain block, number of fractal factor is varied. Simultaneously with minimizing the decrement of decoded image's quality, transmittion rate and encoding time is shorted. The results enable us to process the real-time fractal coding. For the claire test image, the average PSNR was 32.4dB, 0.12 bit rates and 33ms coding time per frame.

• 보건교육건강증진학회지
• /
• 제14권1호
• /
• pp.173-182
• /
• 1997

This study presents the results observed in the change in blood components of ten female students of “K” university's physical Education Department during submaximal exercise, relaxation and recovery periods. 1. After ecercise, the WBC value is higher than in relaxation time. Also within thirty minutes of the relaxation period it does not return to the normal range. 2. After exercise, the RBC value is higher than during relaxation time. Also in the recovery period, within 30 minutes it returns to the normal range. 3. After exercise. the RCT value is higher than during relaxation time. Also in the 30 minutes recovery period it returns to the normal range of relaxation. 4. After exercise, the Hb value is higher than during relaxation time. It rises slowly after exercise and returns to the relaxation range in the 30 minutes recovery period. 5. After exercise and in 10 minutes of the recovery period, the value of Glucose is lower than during relaxation time. It returns to the relaxation range in 30 minutes of the recovery period. 6. After exercise the value of protein is higher than during relaxation time. It returns to the relaxation range within ten to thirty minutes of the recovery period.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.166-174
• /
• 2014

Velocity gradient, G, a measure of the average velocity gradient in the fluid has been applied for complete mixing of chemicals in mechanical mixing devices. G values were calculated by the power input transferred to fluid in turbulent and transient range. Chemical reactions occur so fast that total mass transfer time required for even distribution of the chemicals determine the overall reaction time. The total mass transfer time is composed of the time for complete mixing through the reactor and for diffusion of the chemicals into the eddy. Complete mixing time was calculated by CFD (computer fluid dynamics) and evaluated by tracer tests in 2 liter jars at different rotating speeds. Turbulent range, Reynolds number above 10,000 in regular 2 liter jars occurred at revolution speed above 100 rpm (revolution per minute), while laminar range occurred at revolution speed below 10 rpm. A typical range of rotating speed used in jar tests for water and wastewater treatment was between 10 and 300 rpm, which covered both transient and turbulent range. G values supplied from a commercial jar test apparatus showed big difference from those calculated with power number specially in turbulent range. Diffusion time through eddy decreased 1.5 power-law of rotating speed. Complete mixing time determined by pumping number decreased increases in rotating speed. Total mass transfer time, finally, decreases as rotating speed increases, and it becomes 1 sec at rotating speed of 1,000 rpm. Complete mixing times evaluated from tracer tests showed higher than those calculated by power number at higher rotating speed. Complete mixing times, however, calculated by CFD showed similar to those of experimentally evaluated ones.

• 한국정보과학회논문지:정보통신
• /
• 제37권1호
• /
• pp.27-34
• /
• 2010

본 논문에서는 네트워크 트래픽의 수동적 측정치 분석을 통해 잘 알려진 장거리 상관관계가 광역 네트워크의 능동적 측정치에도 존재하는지 여부를 관련 분석법을 통하여 검정하고자 한다. 이를 위하여 PingER 프로젝트를 통하여 측정된 광역 네트워크 트래픽의 대표적인 능동적 측정치인 RTT(Round Trip Time)와 RTT의 변동성 시계열 데이터에 대하여 분석을 수행하였다. RTT 시계열 데이터는 장거리 상관관계 혹은 1/f 노이즈의 특성을 보였으며, RTT의 고차원 변화량으로 정의된 변동성은 로그정규분포를 따르며 변동성에 대한 장거리 상관관계는 고려하는 시간 간격이 짧은 경우 장거리 상관관계를 보이고, 시간 간격이 긴 경우에는 장거리 상관관계 혹은 1/f 노이즈를 따름을 밝혔다. 본 연구를 통해 볼 때 장거리 상관관계는 비단 패킷 도착의 시간 간격 등과 같은 수동적 측정뿐만 아니라 RTT와 같은 능동적 측정에서도 나타나는 특징이며, 특히 능동적 측정에는 수동적 측정에는 잘 나타나지 않는 1/f 노이즈 특성이 존재함을 밝혔다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권11호
• /
• pp.361-368
• /
• 2015

대공화기사격통제장치에서 유효사거리는 정지한 표적에 대해 충분한 파괴력을 가질 수 있도록 탄속이 음속 이상을 유지하는 거리로 정의되고 있다. 접근하는 표적은 탄과 표적 간 상대속도가 증가하므로 실질적인 교전 사거리는 위의 유효사거리보다 더욱 연장된다. 그러나 기존에 제시된 TOF 계산식은 유효사거리 내에서만 정확하고 유효사거리를 벗어나면 정확하지 못하다. 본 논문은 교전사거리를 보장할 수 있도록 유효사거리 내에서와 유효사거리 밖에서도 충분한 정확도를 가진 실시간 처리가 가능한 탄자비행시간 계산 기법을 제시한다. 시뮬레이션을 통해 30미리 대공 탄에 대한 본 논문의 유용성을 보인다.