• Journal of Information Processing Systems
• /
• 제4권2호
• /
• pp.41-52
• /
• 2008

In this paper, we discuss a novel reservation-based, asynchronous MAC protocol called 'Multi-rate Multi-hop MAC Protocol' (MMMP) for multi-hop ad hoc networks that provides QoS guarantees for multimedia traffic. MMMP achieves this by providing service differentiation for multirate real-time traffic (both constant and variable bit rate traffic) and guaranteeing a bounded end-to-end delay for the same while still catering to the throughput requirements of non real time traffic. In addition, it administers bandwidth preservation via a feature called 'Smart Drop' and implements efficient bandwidth usage through a mechanism called 'Release Bandwidth'. Simulation results on the QualNet simulator indicate that MMMP outperforms IEEE 802.11 on all performance metrics and can efficiently handle a large range of traffic intensity. It also outperforms other similar state-of-the-art MAC protocols.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.208-213
• /
• 2003

Ad hoc 무선망은 중앙 집중화된 관리 혹은 표준화된 지원 서비스의 도움 없이 임시 네트워크를 형성시킨 wireless mobile host들의 집합이다. 이러한 환경에서는 무선 전송 전파 범위의 한계 때문에 하나의 mobile host로 패킷을 목적지에 전송하기 위해서는 다른 host들간의 협력이 필수적이며, 경로설정 프로토콜이 중요한 요소로 여겨진다. 이론적인 면에서 On-demand 경로설정방식이 Table-driven방식보다 효율적인 방식으로 제시되고 있다. 본 논문에서는 기존에 제시된 두 가지 경로설정방식 프로토콜의 대표적인 DSDV, DSR 방식을 시뮬레이션을 통해 성능을 비교 분석하여 효율적인 라우팅 프로토콜을 제시하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1037-1044
• /
• 2007

In an attempt to determine the correlations between the input acoustic impedance and the variations of the physical characteristics of the terminal elements, a five-lobe branched tube-network is mathematically developed and experimentally simulated using a lung simulator. The model takes into account some realistic conditions such as varying cross-sectional areas, flexible wall properties and branching. The effects of airway constrictions expressed by lobe stiffness variations on the impedance are determined for a range of frequencies up to 256 Hz. It is concluded that the developed model is capable of non-invasively predicting various physiological changes in the airway passages.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.12-16
• /
• 2003

In Part 1, the flame structure of the counterflow nonpremixed flames computed by using Fire Dynamics Simulator was compared with that of OPPDIF for different concentrations of methane in the fuel stream. In this study, comparisons were made for the global strain rate that is an important parameter for diffusion flames for further evaluation of FDS. At each of the three fuel concentrations, $20% CH_4＋ 80% N_2, 50% CH_4 ＋ 50% N_2, 90% CH_4 ＋ 10% N_2$ in the fuel stream, the temperature and axial velocity profiles were investigated for the global strain rate in the range from 20 to $100s^{-1}$. Changes in flame thickness and radius were also compared with OPPDIF. There was good agreement in the temperature and axial velocity profiles between the axisymmetric simulations and the one-dimensional computations except for the regions where the flame temperature reach its peak and the axial velocity rapidly changes. The simulations of the axisymmetric flames with FDS showed that the flame thickness decreases and the flame radius increases with increasing global strain rate.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Structure of the counterflow nonpremixed flames were investigated by using Fire Dynamics Simulator(FDS) and OPPDIF to evaluate FDS for simulations of the diffusion flame. FDS, employed a mixture fraction formulation, were applied to the diluted axisymmetric methane-air nonpremixed counterflow flames. Fuel concentration in the mixture of methane and nitrogen was considered as a numerical parameter in the range from 20% to 100% increasing by 10% by volume at the global strain rates of $a_g = 20S^{-l} and 80S^{-1}$ respectively. In all the computations, the gravity was set to zero since OPPDIF is not able to compute the buoyancy effects. It was shown by the axisymmetric simulation of the flames with FDS that increasing fuel concentration increases the flame thickness and decreases the flame radius. The centerline temperature and axial velocity, and the peek flame temperature showed good agreement between the both methods.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.40-44
• /
• 2006

This study investigated a new tuneable bandpass filter based on coplanar waveguide coupled line structure, and using the varactor diode for tuning the center frequency of the filter. The filter was designed by a commercial simulator and had a tuning range of 180[MHz] from 0.95[GHz] to 1.13[GHz]. The filter acceptable values regarding the insertion loss was less than 3[dB] and its return loss greater than 12[dB]. The figure of merit of the implemented tuneable filter increased with the reverse bias voltage up to 14[V] on the varactor diode. The proposed filter has a promising future as it can be used in integration processes and in various materials as substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.139-142
• /
• 2001

As microeletronics technology continues to progress, there is also a continuous demand on highly integration and miniaturization of systems. For example, it is desirable to package several integrated circuits together in multilayer structure, such as multichip modules, to achieve higher levels of compactness and higher performance. Passive components (i.e., capacitors, resistors, and inductors) are very important for many MCM applications. In addition, the low-temperature co-fired ceramic (LTCC) process has considerable potential for embedding passive components in a small area at a low cost. In this paper, we investigate a method of statistically modeling integrated passive devices from just a small number of test structures. A set of LTCC inductors is fabricated and their scattering parameters (5-parameters) are measured for a range of frequencies from 50MHz to 5GHz. An accurate model for each test structure is obtained by using a building block based modeling methodology and circuit parameter optimization using the HSPICE circuit simulator.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.484-488
• /
• 2010

In this paper, we present a novel tunable microstrip bandpass filter based on split ring resonators (SRRs). The varactors are reverse-biased semiconductor diode, and are connected between the concentric rings of the SRR. An individual varactor loaded SRR based bandpass tunable filter module is analyzed. Then a second order tunable filter with 7% fractional bandwidth and a tuning range from 2.75 to 2.86 GHz is assembled from basic filter modules. The simulator HFSS (V10) is used to design the tunable filter and to simulate. The results show good characteristics is created.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.30-35
• /
• 2013

In order to increase cell efficiency in crystalline silicon solar cell, reduction of light reflection is one of the essential problem. Until now silicon wafer was textured by wet etching process which has random patterns along crystal orientation. In this study, high aspect ratio patterns are manufactured by nano imprint process and reflectance could be minimized under 1%. After that, screen printed solar cell was fabricated on the textured wafer and I-V characteristics was measured by solar simulator. Consequently cell efficiency of solar cell fabricated using the wafer textured by nano imprint process increased 1.15% than reference solar cell textured by wet etching. Internal quantum efficiency was increased in the range of IR wave length but decreased in the UV wavelength. In spite of improved result, optimization between nano imprinted pattern and solar cell process should be followed.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.795-798
• /
• 2016

Transmission X-ray tubes based on carbon nanotube have attracted significant attention recently. In most of these tubes, tungsten is used as the target material. In this article, the well-known simulator Geant4 was used to obtain some of the tungsten target parameters. The optimal thickness for maximum production of usable X-rays when the target is exposed to electron beams of different energies was obtained. The linear variation of optimal thickness of the target for different electron energies was also obtained. The data obtained in this study can be used to design X-ray tubes. A beryllium window was considered for the X-ray tube. The X-ray energy spectra at the moment of production and after passing through the target and window for different electron energies in the 30-110 keV range were also obtained. The results obtained show that with a specific thickness, the target material itself can act as filter, which enables generation of X-rays with a limited energy.