• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.62-70
• /
• 1999

To achieve precision positioning, working area is required within $5mm{\times}5mm$ and positioning error is allowed within minimum ${\pm}4{\mu}m$. As a general three-layered table takes working range from several centimeters and a few tens of centimeters, it has disadvantages compared with precision positioning table, such as larger working range and rough accuracy. In this paper we design and implement a parallel $XY{\theta}$ table with three linear actuators, where one is on the horizontal direction and the others on the vertical direction on behalf of a degree of $XY{\theta}$ freedom. Finally, the experimental results of precision positioning is showed by using new image processing algorithms with two CCD cameras.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.250-256
• /
• 1997

For compensating the error motion of hydrostatic tables, we have introduced a way that the clarance of table is actively controlled corresponding to the amount of error with the nariable capillary,anmed as ACC. In previous paper,through the basic test, it was confirmed that by the use of ACC,the error motion within 2.7 .mu.m of a hydrostatic table could be compensated with the resolution of 27nm, 1/100 contollable range, and with the freqency bandwidth of 5.5Hz structurally. In this paper,we performed practital compensation of the linear and angular motion error of hydrostatic table using ACC. For improving the compensated motion accuracy,iterative control method is put into the control system. The experimental results show that by the simultaneous compensation of error,the linear and angular motion error are improved upto 0.25 .mu.m and 0.4arcsec,which are about 1/10 and 1/3 of the non-compensated motion errors respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.4
• /
• pp.88-101
• /
• 1992

Properties of water and steam are very important for the steam ejector CAD program as a subroutine and design of the Shell & Tube type steam condenser. Present formular programs are based on the Skeleton Table of ASME, and are able to calculate the thermodynamoc properties of water and steam throughout the whole of the region that extend in pressure from 0 to 1000 bar and temperature from 0.01 to 80$0^{\circ}C$. When comparing calculated values for specific volume, enthalpy and entropy with the Skeleton Table 1967 and IAPS Skeleton Table 1984, values fell well within tolerances specified except near the extremes of the range of interest at the critical point and triple point, where deviations were slightly larger.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.806-812
• /
• 2005

This paper adresses the shaking table tests with 1/100 scaled model followed similitude law for OOdam main designing section to understand nonlinear behavior characteristics of concrete dam body by ground motion. As earthquake wave, Hachinohe and El Centre waves were used and acceleration and displacements are measured to analyze behaviors of dam body. For maximum ground acceleration range $(0.3\~0.9 g)$, the results showed linear behavior regardless of maximum 9round acceleration and secured safety of structure. To analyze the behavior of dam after tension cracking, 3 cm-notch was placed at the critical section of over-flowing section. As results of applying Hachinohe wave(0.8 g), Even though tension cracks were formed at over-flowing section by Hachinohe wave(0.8 g), it showed that the dam is stable for supporting upper stream Part of water tank of dam.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.E
• /
• pp.12-19
• /
• 1992

The effects of drainage system on evapotranspiration and drainage flows are studied. Data from drainage field experiment at Castalia in North Central Branch, Ohio Agricultural Research and Development Center were used in this study. A water table management model, ADATP (Agricultural Drainage and Pesticide Transport), which was developed by combining the GLEAMS and the subsurface drainage part of the DRAINMOD model with several modifications, was evaluated and used to predict hydrologic components. The ET is very much affected by the presence of tile drainage system but not significantly affected by the surface drainage system. The combined surface and subsurface drainage system gives the largest total outflow values while the surface drainage only system gives the smallest. Comparisons of model predicted and measured values of surface runoff only, subsurface drainage only, and combined surface runoff and subsurface drainage system are in satisfactory agreement. The model predicted values are within the range of the variations of the observed replications in general. Based on the results of the model evaluation study, it is concluded that ADAPT model can be used to design water table management systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.873-889
• /
• 2014

IP address lookup is very crucial in performance of routers. Several works have been done on prefix caching to enhance the performance of IP address lookup. Since a prefix represents a range of IP addresses, a prefix cache shows better performance than an IP address cache. However, not every prefix is cacheable in itself. In a prefix cache it causes false hit to cache a non-leaf prefix because there is possibly the longer matching prefix in the routing table. Prefix expansion techniques such as complete prefix tree expansion (CPTE) make it possible to cache the non-leaf prefixes as the expanded forms, but it is hard to manage the expanded prefixes. The expanded prefixes sometimes incur a great deal of update overhead in a routing table. We propose a bitmap-based prefix cache (BMCache) to provide low update overhead as well as low cache miss ratio. The proposed scheme does not have any expanded prefixes in the routing table, but it can expand a non-leaf prefix using a bitmap on caching time. The trace-driven simulation shows that BMCache has very low miss ratio in spite of its low update overhead compared to other schemes.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.421-427
• /
• 2015

21century design is working in order to increase the accessibility, eliminating alienation hierarchy for the use of the product. Efforts to these design approach are not intended for a small number of users. It offers the advantage of a variety of design for users of a wider range. So, it was allowed to extend the value in good design for all human beings. Traditional thought is expressed in a variety of shapes by applying meaning to another re-interpretation for the form to contemporary furniture and structure and decoration. Gyeongsang have a religious solemn feeling in the typical furniture of hall space that reflects the inner distinctive tradition thought of scholar of the Chosun Dynasty. For these reasons, in the present study, based on the modeling elements of Gyeongsang, which is based on the traditional idea of our country, there is the purpose to propose a design of agreed with table in modern lifestyle. Design concept proposed in this paper, to be applied to the design of the table is placed in the living space by re-interpreting the modeling properties which can be felt in the thin form and structure and patterns as modern image.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.125-132
• /
• 2002

This paper shows an experimental magnetic levitation table using one degree-of-freedom active control. The magnetic levitation table using repulsions of permanent magnets was theoretically presented already. Thus the objective of this paper is to prove stable levitation with only one degree-of-freedom active control experimentally. For the design of the system, at first, permanent magnets are selected. Secondly, the spring constants of the virtual spring are obtained by simulation. Thirdly, the moving magnets are arranged using a stable layout relation. Fourthly, a linear voice coil motor is designed. Finally, the magnetic levitation system is manufactured. The phenomenon of stable levitation in the manufactured table is proven by means of dynamic time and frequency responses. The differences between the theoretical natural frequencies and experimental ones are analyzed. Also, stable range in the control direction is shown experimentally.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.207-214
• /
• 1997

The objective of this study is to review the current stare of earthquake simulation techniques using the shaking table and check the reliability. One degree-of-freedom(d.o.f.)and three d.o.f. aluminium shear models were used and 4m$\times$4m 6 d.o.f. shaking table was excitated in one horizontal direction to simulate 1940 El centro earthquake accelerogram (NS component). When the acceleration history of shaking table is compared to the desired one, it can be found that the overall histories are very similar, but that the lower frequency range (0~2 Hz) of the actual excitation has generally lower amplitude than that of the desired in fourier transform amplitude. Free vibration and white noise tests have shown almost the same values for natural frequencies, but shown quite different values for damping ratios, that is, 1.37% in case of r\free vibration test vs 14.76% in case of white noise test. The time histories of story shear versus story drift show the globally linear elastic behaviors. But the elliptical shape of the histories with one of the axis being the stiffness of the story implies the effect of viscous damping.

• Structural Engineering and Mechanics
• /
• v.28 no.6
• /
• pp.677-694
• /
• 2008

A vibration power minimization model is developed, based on the mobility matrix method, for a vibration isolation system consisting of a vibrating source placed on an elastic support structure through multiple resilient mounts. This model is applied to investigate the design optimization of an X-Y motion stage-based vibration isolation system used in semiconductor wire-bonding equipment. By varying the stiffness coefficients of the resilient mounts while constraining the dynamic displacement amplitudes of the X-Y motion stage, the total power flow from the X-Y motion stage (the vibrating source) to the equipment table (the elastic support structure) is minimized at each frequency interval in the concerned frequency range for different stiffnesses of the equipment table. The results show that when the equipment table is relatively flexible, the optimal design based on the proposed vibration power inimization model gives significantly little power flow than that obtained using a conventional vibration force minimization model at some critical frequencies. When the equipment table is rigid enough, both models provide almost the same predictions on the total power flow.