• Journal of the Korean Society of Safety
• /
• v.3 no.2
• /
• pp.35-48
• /
• 1988

Modern technological progress demands the use of materials at high temperature and high pressure. One of the most critical factors in considering such applications - perhaps the most critical one - is creep behavior. In this study the stress exponents n were determined during creep over the temperature range of $90^{\circ}C\;to\;500^{\circ}C$ (0.4 - 0.85 Tm) and stress range of 0.64 kgt/$mm^2$ in order to investigate the creep hehavior. The stress dependence of rapture time (n') were determined over the temperature range of $200^{\circ}C\;to\;240^{\circ}C$ and stress range of 8.13 kgt/$mm^2$ to 9.55 kgt/$mm^2$ in order to investigate to creep rupture property. And the stress transient dip tests were also carried out for the internal stress ${\sigma}i$ over the temperature range of $90^{\circ}C\;to\;500^{\circ}C$ and stress range of 0.64kgt/$mm^2$ to 17.2 kgt/$mm^2$. The creep tests for constant temperature and stress transient dip tests were conducted in air with Al 7075 alloy under constant tensile load. At around the temperature range $200^[\circ}C\;-\;230^{\circ}C$ and the stress level 8.13 - 9.55 (kgt/$mm^2$), the temperature range $280^{\circ}C\;-\;310^{\circ}C$ and the stress level 1.85 - 2.55 (kgt/$mm^2$), the temperature range $380^{\circ}C\;-\;410^{\circ}C$ and the stress 1.53 - 0.91 (kgt/$mm^2$), the stress exponent in had the value of 6.2 - 6.65 but at around the temperature range $90^{\circ}C\;-\;120^{\circ}C$ and the stress level 10 - 17.2(kgt/$mm^2$), the value of 1.3, and at around the temperature range $470^{\circ}C\;-\;500^{\circ}C$, the stress level 0.62 - 1.02 (kgt/$mm^2$) the value of 1-1. Besides these results, at around the temperature $200^{\circ}C\;-\;240^{\circ}C$ the stress dependence of rupture time (n') had the value of 6.3. Finally, it was found that the value n calculated by considering the applied stress dependence of the internal stress were in good agreement with those obtained for the creep test. Then, it was concluded that the change in n was mainly attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the creep rupture life may be represented as.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.127-136
• /
• 2020

Chemical terrorism and accidents using chemicals are continuously occurring and attempted in and out of the country. In Korea, the National Institute of Chemical Safety affiliated with Ministry of Environment employs the CARIS(Ver. 2018) to assess the damage impact range for field-based response against chemical terrorism and accidents. However, the current version of CARIS can not consider the effects of closed space such as indoor and underground, so it is difficult to provide accurate evaluation results for damage impact range required for field response, on top of the limited information available. The limitations and directions for improvement were studied by comparing and reviewing the evaluation results of the damage impact range obtained by driving CARIS (Ver. 2018) and the domestic and foreign literature. Proposed improvements also included the direction of information provided to residents, including the need to build modeling for special points, such as underground, indoor, etc., and on-site response personnel. It is expected that through the continuous supplementation and correction of CARIS, chemical terrorism and accident response capability system will be advanced further.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.169-174
• /
• 2018

A total of 594 reservoirs (17%), which are managed by KRC, equipped with earthquake-resistant facilities whereas remaining ones did not. In addition, reservoirs were placed without the effect of geological structures (i.e., fault and lineament). Therefore, development on technique for alleviating the potential hazards by natural disasters along faults and lineaments has required. In addition, an effective reinforcement guideline related to the geological vulnerabilities around reservoirs has required. The final goal of this study is to suggest the effective maintenance for the safety of earth fill dams. A radius 2 km, based on the center of the reservoir in the study area was set as the range of vulnerability impacts of each reservoir. Seismic design, precise safety diagnosis, seismic influence and geological structure were analyzed for the influence range of each reservoir. To classify the vulnerability of geological disasters according to the fault distribution around the reservoir, evaluation index of seismic performance, precise safety diagnosis, seismic influence and geological structure were also developed for each reservoir, which were a component of the vulnerability assessment of geological disasters. As a result, the reservoir with the highest vulnerability to geological disasters in the pilot district was analyzed as Kidong reservoir with an evaluation index of 0.364. Within the radius of 100km from the epicenter of the Pohang earthquake, the number of agricultural infrastructure facilities subject to urgent inspections were 1,180 including reservoirs, pumping stations and intakes. Four reservoirs were directly damaged by earthquake among 724 agricultural reservoirs. As a result of the precise inspection and electrical resistivity survey of the reservoir after the earthquake, it was reported that cracks on the crest of reservoirs were not a cause of concern. However, we are constantly monitoring the safety of agricultural facilities by Pohang aftershocks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.764-771
• /
• 2010

The stability analysis method of an unsaturated slope considering the suction stress was performed on the infinite sand slope. During drying and wetting processes, the Soil-Water Characteristics Curve (SWCC) of the sand with the relative density of 75% was measured using the automated SWCC apparatus. Also, the Suction Stress Characteristics Curve (SSCC) was estimated. Based on these results, the stability analysis of an unsaturated infinite slope was carried out considering the slope angle, the weathering zone and the relative change in friction angle as a soil depth. According to the result of slope stability analysis, the safety factors of slope were less than 1 when the slope angles were more than $50^{\circ}$. The safety factors of slope tend to increase with increasing the depth from the ground surface. Especially, the safety factors have a tendency to increase and decrease above near the ground water level due to the suction stress. The maximum safety factor of slope in this analysis was occurred at the Air Entry Value (AEV) of drying process. The influence range of suction stress above the ground water level can be found out and can be defined as the funicular zone which means the metric suction range from the air entry point to the point of residual volumetric water content.

• Safety and Health at Work
• /
• v.3 no.3
• /
• pp.216-223
• /
• 2012

Objectives: The objectives of this study were to determine the lead levels in blood samples from nielloware workers, to determine airborne lead levels, to describe the workers' hygiene behaviors, and to ascertain and describe any correlations between lead levels in blood samples and lead levels in airborne samples. Methods: Blood samples and airborne samples from 45 nielloware workers were collected from nielloware workplaces in Nakhon Sri Thammarat Province, Thailand. Lead levels were determined by flame atomic absorption spectrometry (FAAS), at a wavelength of 283.3 nm. FAAS was used especially adequate for metals at relatively high concentration levels. Results: The geometric mean of the 45 airborne lead levels was 81.14 ${\mu}g/m^3$ (range 9.0-677.2 ${\mu}g/m^3$). The geometric mean blood lead level of the 45 workers was 16.25 ${\mu}g/dL$ (range 4.59-39.33 ${\mu}g/dL$). No worker had a blood lead level > 60 ${\mu}g/dL$. A statistically significantly positive correlation was found between airborne lead level and blood lead levels (r = 0.747, p < 0.01). It was observed that personal hygiene was poor; workers smoked and did not wash their hands before drinking or eating. It was concluded that these behaviors had a significant correlation with blood lead levels (p < 0.001). Conclusion: Improvements in working conditions and occupational health education are required due to the correlation found between blood leads and airborne lead levels.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.153-164
• /
• 2020

Objectives This study is designed to evaluate the safety of Soshihotang soft extract in healthy male volunteers. Methods 12 healthy male volunteers were recruited and this study was carried out by a single center. Laboratory test results, vital signs of the volunteers were collected to evaluate safety. According to registration order, the 12 subjects were allocated by serial number. To evaluate safety, blood samples were taken and vital signs were checked 4 times-screening, pre administration, post administration and follow up-during the whole trial. The incidence of all adverse effects are shown in percentage. The mean and standard deviation were used to to describe and summarize continuous data. To evalate the effectiveness of the intervention, data of blood tests was analyzed by Wilcoxon signed rank test or paired T-test (p<0.05). Results In the case of red blood cell, hemoglobin, hematocrit, neutrophils, protein, albumin, alkaline phosphatase, aspartate aminotransferase, alanine aminotransferase, γ-glutamyl transpeptidase values, the normality test result of the variable for the difference value before and after the dosing has a significance level <0.05. But most of values did not deviate from the normal range, and the deviation from the normal range could not be regarded as the significance associated with this clinical trial. And adverse event wasn't observed associated with the clinical trial drug. Conclusions Soshihotang soft extract were considered to be safe for healthy male volunteers.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.811-818
• /
• 2018

A fire and explosion accident caused by a liquefied petroleum gas (LPG) welding and cutting torch gas leak occurred 10 m underground at the site of reinforcement work for bridge columns, killing four people and seriously injuring ten. We conducted a comprehensive investigation into the accident to identify the fundamental causes of the explosion by analyzing the structure of the construction site and the properties of propane, which was the main component of LPG welding and cutting work used at the site. The range between the lower and upper explosion limits of leaking LPG for welding and cutting work was examined using Le Chatelier's formula; the behavior of LPG concentration change, which included dispersion and concentration change, was analyzed using the fire dynamic simulator (FDS). We concluded that the primary cause of the accident was combustible LPG that leaked from a welding and cutting torch and formed a explosion range between the lower and upper limits. When the LPG contacted the flame of the welding and cutting torch, LPG explosion occurred. The LPG explosion power calculation was verified by the blast effect computation program developed by the Department of Defense Explosive Safety Board (DDESB). According to the fire simulation results, we concluded that the welding and cutting torch LPG leak caused the gas explosion. This study is useful for safety management to prevent accidents caused by LPG welding and cutting work at construction sites.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.702-709
• /
• 2020

Objectives: Hand sanitizer is made with ethyl alcohol as the main ingredient. Problems related to the use of hand sanitizers and cases of harm caused by the use of hand sanitizers are occurring. This study investigated the usage behavior and recognition level of people using hand sanitizer and identified the chemical components listed in the component label of hand sanitizer. In addition, the methanol and isopropanol contained in hand sanitizer were quantified using HS-GC-MSD. Methods: The investigation of the behavior and recognition of hand sanitizer usage was conducted through a survey of 143 college students and adults. The components marked on 34 types of hand sanitizers were investigated, and methanol and isopropanol concentrations were analyzed using the HS-GC-MSD method. Results: According to the survey, 57% of respondents use hand sanitizers two to three times per day, 92.3% of them do so when in public places and 41.3% of them do so at home. Ethanol, purified water, carbomer, glycerin, and triethanolamine were the ingredients listed in the hand sanitizer. Among the 34 samples, methanol and isopropyl alcohol were detected in 33 samples, the concentration range for methanol was ND-567 ppm, and the concentration range of isopropyl alcohol was ND-2121 ppm. Conclusion: The results of this study have shown that hand sanitizers are being used constantly every day, and methanol, which is not included in the marked content, was detected in a significant concentration compared to wet tissue. It has been found that maintenance of hand sanitizer manufacturing standards and training on how to use them are needed.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.12-19
• /
• 2022

Circuit breakers are a crucial factor in ensuring the safety of a Direct Current (DC) grid. One type of DC circuit breaker, the Z-source DC circuit breaker (ZCB), uses a thyristor, which is a type of semiconductor switch. In the event of a fault in the circuit, the ZCB isolates the fault by generating a zero crossing current in the thyristor. The thyristor quickly and actively isolates the fault while generating a zero crossing current, but thyristor switch cannot control turn-off and the allowable current is lower than the current of the mechanical switch. Therefore, it is best to use a mechanical switch with a high allowable current capacity that is capable of on/off control. Due to the slow reaction time of mechanical switches, they may not isolate the fault during the zero crossing current time interval created by the existing circuit. In this case, the zero crossing current time can be increased by using the property that hinders the rapid change in the current of the inductor. This paper will explore whether adding system inductance to increase the zero crossing current time interval is a solution to this problem. The simulation of changing inductor and capacitor (LC) of the circuit is repeated to find an optimal change in the zero crossing current time according to the LC change and provides an inductor and capacitor range optimized for a specific load. The inductor and capacitor range are expected to provide optimization information in the form LC values for future applications of ZCB's using a mechanical switch.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.1
• /
• pp.77-85
• /
• 2023

Objectives This study is designed to evaluate the safety of palmul-tang soft extract in healthy male volunteers. Methods Twelve healthy male volunteers were recruited. And this study was conducted in a single center. As a result of the laboratory test, the safety was evaluated by collecting vital signs of volunteers. Twelve subjects were assigned by serial number according to the registration order. For safety evaluation, blood samples were collected and vital signs were checked four times throughout the test period, including screening, pre-administration, post-administration (after 48 hours) and post-administration (after 7 days). The difference in variables was summarized as the mean±standard deviation. The normality was performed using Kolmogorov-Smirnov and Shapiro-Wilk test. If normality is satisfied, a paired t-test is applied. Otherwise, the Wilcoxon sign rank test, which is a nonparametric method, is applied. The significance was p<0.05. The incidence of all side effects is expressed as a percentage. Results In the case of red blood cell, hemoglobin, and hematocrit values, the result of normality test of variables for the difference value before and after administration is significant level p<0.05. However, all laboratory test values before and after administration did not deviate from the normal range. Also the deviations in the normal range could not be seen as significance related to this clinical trial. And no side effects related to clinical trial drugs were observed. Conclusions The soft extract of palmul-tang was considered safe for healthy male volunteers.