• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.98-101
• /
• 1996

Background: Lumbar epidural steroid injection for relief of low back pain and sciatica has become a popular procedure. further, cervical epidural steroid injection with nerve block (CESNB) is known to be effective for the management of acute and chronic pain of neck, shoulder and arm. However, many anesthesiologists are not familiar with CESNB. Methods: Charts of 34 patients who had undergone 60 cervical epidural steroid injections over a three year period, 1993 to 1995, were reviewed. We studied the followings: initial visit and department, injected interspaces, personal characteristics, indications for injection and complications. Results: Patients' first visits were mainly to orthopaedics (11 patients) and neurosurgery (10 patients). Epidural injection sites were: C7-T1 interspace (29 patients) and C6-C7 interspace (6 patients). Mean age of patients were 50.1 years. range 21~73 years. There were twenty male and fourteen female patients. Complications varied from dizziness after CESNB (1 patient). loss of consciousness with transient apnea (2 patients), and local infection with suspicious meningitis (1 patient). Conclusion: We conclude from the above data that CESNB is a good, safe and conservative form of therapeutic procedure in the management of patients suffering from cervical radiculopathy, and neck and shoulder pain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.182-190
• /
• 1997

Recently to develope an automobile with better properties, much researches and investments are executed in many countries. In this paper, it is intended to minimize the weight of an engine block without changing the dynamic characteristics. The weight minimization is executed by the sensitivity of the natural frequency of the engine block. To decrease the engine weight, much less thickness than the original thickness of the engine is selected to initial value and the structure modification is performed to recover the dynamic characteristics of the engine. Here, the original thickness of the engine is 8mm and the initial thickness is selected to 5mm, 6mm and the number if the natural frequencies fitted are 2, 6, 7, respectively. As the results, it is found that; (1) the weight of each case could be reduced without changing the objective natural frequencies. Specially, in the case of fitting 2 natural frequencies with 5mm initial thickness the weight could be reduced to 4.21kg(23.3% for engine weight). (2) according to the driving frequency range of engine, the weight minimization could be performed choicely, (3) improving a vibration characteristics of a orignal structure, the weight minimization could be performed.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.80-88
• /
• 2006

In the present study damage behavior of resilient sleepers on concrete ballasts is analyzed. Cracks of resilient sleepers in a railway track system are concentrated on inside of blocks to which the tie bars are connected. Finite element analysis is performed by dividing a block into the straight section and the curved section according to the load condition of the resilient sleeper, and limited the interpretation within the range of resilience. In addition, the value of stress obtained from the interpretation was compared with the allowable stress of concrete to determine the safety. According to the result of numerical analysis, compared with the stress before unequal settlement, the tensile stress of the inside of the block increased significantly after the settlement considering the entire block, and the tensile stress of this part exceeded the allowable stress of concrete, so was undesirable in terms of safety. In reality, the arrangement of tensile stiffeners inside blocks connected to tie bars is improper in the design of resilient sleepers, and when unequal settlement occurs, tensile stress increases on this part and consequently causes cracking damage. It is necessary to arrange wire meshes or tensile reinforcing bars in a structurally safe way to reinforce the inside of blocks on which cracks are concentrated.

• The Korean Journal of Ecology
• /
• v.14 no.1
• /
• pp.25-38
• /
• 1991

Berchemia berchemiaefolia is a native a native rare plant which has been designating as the Natural Monument, No. 266, since 1980. The floristic composition, population structure and maintenance mechanism of the Berchemia berchemiaefolia forest were investigated in conjunction with the habitat consisted of the block field or screes. Through the present study, the authors found a new habitat of Berchemia berchemiaefolia in the northeastern slope on Mt. Kumdansan located at Hajeok-ri, Cheongcheon-myeon, Koesan-gun, chungbuk province. Gravels consisted of the block field belonged to granule, pebble and cobble as the range of grain size, $\Phi$=-1.5~6.6 values. The tree layer of Berchemia berchemiaefolia community was mainly composed of Quercus variabilis, Pinus densiflora and Q. serrata including Berchemia berchemiaefolia and of this community were similar to that of Q. variabilis. By the age distribution, it was considered that the community was a discontinued one as the pattern of distribution was a normal distribution type(N type). Phenological cycle including leafing, blooming and seed-bearing period between both sites of block field and valley or close canopy showed some differences. The seed production of Berchemia berchemiaefolia was 8, 655, 000 seeds/ha/year, but only 406, 000 seeds/ha/year of them were developed as saplings, and only 4 saplings were developed to mature trees.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.433-439
• /
• 2010

This paper proposes a beacon color code scheduling algorithm for the localization of multiple robots in a multi-block workspace. With the developments of intelligent robotics and ubiquitous technology, service robots are applicable for the wide area such as airports and train stations where multiple indoor GPS systems are required for the localization of the mobile robots. Indoor localization schemes using ultrasonic sensors have been widely studied due to its cheap price and high accuracy. However, ultrasonic sensors have some shortages of short transmission range and interferences with other ultrasonic signals. In order to use multiple robots in wide workspace concurrently, it is necessary to resolve the interference problem among the multiple robots in the localization process. This paper proposes an indoor localization system for concurrent multiple robots localization in a wide service area which is divided into multi-block for the reliable sensor operation. The beacon color code scheduling algorithm is developed to avoid the signal interferences and to achieve efficient localization with high accuracy and short sampling time. The performance of the proposed localization system is verified through the simulations and the real experiments.

• Journal of the Speleological Society of Korea
• /
• no.68
• /
• pp.75-98
• /
• 2005

Korea physiographic province is divided into two provinces which is northern Chugaryung graben zone and southern Chugraryung graben zone. Northern Chugraryung is also divided in to Gema block and Kohan block, and southern Chugraryung dividedinto Han block, Yongnam basin and Honam plain. The above mentioned macro geomorophic units is divided, mainly on the geotectonics. The meso geomorphic units is divided, based upon the regional distribution of topographic characteristic that is plateaus, mountains, mountain range, basins and great plain etc. Micro geomorphic units id into a mountain, a hill, a plain, and a lowland, and then it is formed by selfreliant topographic unit. And micro topographic (fan, peneplain, delta, etc) dealt with a characteristics unit. In this article has a disregarded amallest scale that is included flood plait natural levee, back marsh and oxbow lake etc. Accordingly, it shows macro units are meso units are 5, meso units are 53, micro units are 299. A study method of physiographic provincs prefered to aufsteigende and abstergands methoy. How to organically combine topographic factors can be seen in regional distribution of the peculiar topographic characteristics, for charage teristic of topographic makes a study on the topographic of micro unit such understanding as aufsteigende method. At the same time, since it can be studied systematically from marco unit to micro unit like the absteigende methods, I used both methods. And this establishment of physiographic province based on the scientific method depend on the base map of climate classification. Geology, Soil, Biology. I feel confident that it will be used the basic map for land use map, land classification map, study of geomorphology of Korea. And will be used for study of a topographic standard data.

• Journal of Hydrogen and New Energy
• /
• v.27 no.1
• /
• pp.42-48
• /
• 2016

This study presents an experiment investigation on natural convection heat transfer of air-cooling Proton exchange membrane fuel cells (PEMFCs) in a enclosure system for unmanned aerial vehicles (UAVs). Considered are replacing fuel cell stack with Aluminum block for heat generating inside a enclosure chamber. The volume ratio of fuel cell stack and chamber for simulation to the actual size of aerial vehicle is 1 to 15. The parameters considered for experimental study are the environmental temperature range from $25^{\circ}C$ to $-60^{\circ}C$ and the block heat input of 10 W, 20 W and 30 W. Effect of the thermal conductivity of the block and power level on heat transfer in the chamber are investigated. Experimental results illustrate the temperature rise at various locations inside the chamber as dependent upon heat input of fuel cell stack and environmental temperature. From the results, dimensionless correlation in natural convection was proposed with Nusselt number and Rayleigh number for designing air-cooling PEMFC powered high altitude long endurance (HALE) UAV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1484-1502
• /
• 2023

The medical sector actively changes and implements innovative features in response to technical development and revolutions. Many of the most crucial elements in IoT-connected health services are safeguarding critical patient records from prospective attackers. As a result, BlockChain (BC) is gaining traction in the business sector owing to its large implementations. As a result, BC can efficiently handle everyday life activities as a distributed and decentralized technology. Compared to other industries, the medical sector is one of the most prominent areas where the BC network might be valuable. It generates a wide range of possibilities and probabilities in existing medical institutions. So, throughout this study, we address BC technology's widespread application and influence in modern medical systems, focusing on the critical requirements for such systems, such as trustworthiness, security, and safety. Furthermore, we built the shared ledger for blockchain-based healthcare providers for patient information, contractual between several other parties. The study's findings demonstrate the usefulness of BC technology in IoHT for keeping patient health data. The BDSA-IoHT eliminates 2.01 seconds of service delay and 1.9 seconds of processing time, enhancing efficiency by nearly 30%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.12
• /
• pp.3398-3415
• /
• 2023

Internet-of-Things (IoT) is an emerging technology that interconnects millions of small devices to enable communication between the devices. It is heavily deployed across small scale to large scale industries because of its wide range of applications. These devices are very capable of transferring data over the internet including critical data in few applications. Such data is exposed to various security threats and thereby raises privacy-related concerns. Even devices can be compromised by the attacker. Modern cryptographic algorithms running on traditional machines provide authentication, confidentiality, integrity, and non-repudiation in an easy manner. IoT devices have numerous constraints related to memory, storage, processors, operating systems and power. Researchers have proposed several hardware and software implementations for addressing security attacks in lightweight encryption mechanism. Several works have made on lightweight block ciphers for improving the confidentiality by means of providing security level against cryptanalysis techniques. With the advances in the cipher breaking techniques, it is important to increase the security level to much higher. This paper, focuses on securing the critical data that is being transmitted over the internet by PRESENT using key-based dynamic S-Box. Security analysis of the proposed algorithm against other lightweight block cipher shows a significant improvement against linear and differential attacks, biclique attack and avalanche effect. A novel key-based dynamic S-Box approach for PRESENT strongly withstands cryptanalytic attacks in the IoT Network.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2057-2062
• /
• 2024

Among photon counting detector (PCD)-based technologies, the K-edge subtraction (KES) method has a very high material decomposition efficiency. Yet, since the increase in noise in the X-ray image to which the KES method is applied is inevitable, research on image quality improvement is essential. Here, we modeled a block-matching and 3D filtering (BM3D) algorithm and applied it to PCD-based X-ray images with the improved KES (IKES) method. For PCD modeling, Monte Carlo simulation was used, and a phantom composed of iodine substances with different concentrations was designed. The IKES method was modeled by adding a log term to KES, and the X-ray image used for subtraction was obtained by applying the 3.0 keV range based on the K-edge region of iodine. As a result, the IKES image using the BM3D algorithm showed the lowest normalized noise power spectrum value. In addition, we confirmed that the contrast-to-noise ratio and no-reference-based evaluation results when the BM3D algorithm was applied to the IKES image were improved by 29.36 % and 20.56 %, respectively, compared to the noisy image. In conclusion, we demonstrated that the IKES imaging technique using a PCD-based detector and the BM3D algorithm fusion technique were very efficient for X-ray imaging.