• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.27-33
• /
• 2016

In this paper, we propose the bilateral filter based on median value that can reduce random noise and impulse noise with minimal loss of contour information. In general, EO / IR camera to generate a random or impulse noise due to a number of reasons. This noise reduces the performance of detecting and tracking by signal processing. To reduce noise, our proposed bilateral filter sorts the values of the target pixel and the peripheral pixels, and extracts a median filter coefficients of the Gaussian type. Then to extract the Gaussian filter coefficient involved with the distance between the center pixel and the surrounding pixels. As using those filter coefficients, our proposed method can remove the various noise effectively while minimizing the loss of the contour information. To validate our proposed method, we present experimental results for several IR images.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1383-1391
• /
• 2018

A new nonlinear filtering algorithm for effectively denoising images corrupted by the random-valued impulse noise, called dual sliding statistics switching median (DSSSM) filter is presented in this paper. The proposed DSSSM filter is made up of two subunits; i.e. Impulse noise detection and noise filtering. Initially, the impulse noise detection stage of DSSSM algorithm begins by processing the statistics of a localized detection window in sorted order and non-sorted order, simultaneously. Next, the median of absolute difference (MAD) obtained from both sorted statistics and non-sorted statistics will be further processed in order to classify any possible noise pixels. Subsequently, the filtering stage will replace the detected noise pixels with the estimated median value of the surrounding pixels. In addition, fuzzy based local information is used in the filtering stage to help the filter preserves the edges and details. Extensive simulations results conducted on gray scale images indicate that the DSSSM filter performs significantly better than a number of well-known impulse noise filters existing in literature in terms of noise suppression and detail preservation; with as much as 30% impulse noise corruption rate. Finally, this DSSSM filter is algorithmically simple and suitable to be implemented for electronic imaging products.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.722-728
• /
• 2020

Digital image processing has been applied in a wide range of fields due to the development of IoT technology and plays an important role in data processing. Various techniques have been proposed to remove such noise, but the conventional impulse noise canceling methods are insufficient to remove noise of edge components of an image, and have a disadvantage of being greatly affected by random impulse noise. Therefore, in this paper, we propose an algorithm that effectively removes edge component noise in random impulse noise environment. The proposed algorithm calculates the threshold value by determining the noise level and switches the filtering process by comparing the reference value with the input pixel value. The proposed algorithm shows good performance in the existing method, and the simulation results show that the noise is effectively removed from the edge of the image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.598-604
• /
• 2012

Image signal is corrupted by various noises in image processing, many studies are being accomplished to restore those images. In this paper, we proposed a cascade filter algorithm for removing random valued impulse noise. The algorithm consists two steps that noise detection and noise elimination. Variance of filtering mask and center pixel variance are calculated for noise detection, and the noise pixel is replaced by estimated value which first apply switching self adaptive weighted median filter and finally processed by modified weight filter. Considering the proposed algorithm only remove noise and preserve the uncorrupted information that the algorithm can not only remove noise well but also preserve edge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.609-615
• /
• 2020

In the modern society, the use of digital equipment is increasing along with the 4th industrial revolution, and the importance of image and signal processing is increasing. At the same time, research on noise reduction is being actively conducted. In this paper, we propose a switching filter algorithm for random-valued impulse noise cancellation. The proposed algorithm obtains the threshold value by determining the noise level present in the image, and threshold value is compared with the difference between the input pixel value and the reference value, and is used in the weight switching process of the filter. The final output of the filter is estimated by applying a pixel weight and a modified weight median filter according to the switching, and obtains a final output by comparing the estimated value with the input pixel value. To evaluate the performance of the proposed algorithm, we compared it with the existing methods using simulation and PSNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.54-61
• /
• 2023

With the development of IoT technologies and artificial intelligent, diverse digital image equipments are being used in industrial sites. Because image data can be easily damaged by noise while it's obtained with a camera or a sensor and the damaged image has a bad effect on the process of image processing, noise removal is being demanded as preprocessing. In this thesis, for the restoration of image damaged by the noise of random impulse, a switching filter algorithm based on noise estimation was suggested. With the proposed algorithm, noise estimation and error distraction were carried out according to the similarity of the pixel values in the local mask of the image, and a filter was chosen and switched depending on the ratio of noise existing in the local mask. Simulations were conducted to analyze the noise removal performance of the proposed algorithm, and as a result of magnified image and PSNR comparison, it showed superior performance compared to the existing method.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.347-352
• /
• 2013

In impulse noise filtering techniques window size play an important role. Usually, an appropriate window is determined according to the noise density. A small window may not be able to suppress noise properly whereas a large window may remove edges and fine image details. Moreover, the value of the central pixel is estimated by considering all pixels within the window. In this work, contrary to the previous approaches, we propose an iterative impulse noise removal scheme that emphasizes on noise-free pixels within a small neighborhood. The iterative process continues until all noisy pixels are replaced with the estimated pixels. In order to estimate the optimal value for a noisy pixel, a genetic programming (GP) based estimator is evolved that takes few noise-free pixels as input. The estimator is constituent of noise-free pixels, arithmetic operators and random constants. Experimental results show that theproposed scheme is capable of removing impulse noise effectively while preserving the fine image details. Especially, our approach has shown effectiveness against high impulse noise density.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.585-591
• /
• 2000

The wavelet transform is the most recent technique for processing signals with time-varying spectra. In this paper, the wavelet transform is utilized to improved the assessment and multi-resolution analysis of acoustic emission signals generating in partial discharge. This paper especially deals with the assessment of process statistical parameter using the features extracted from the wavelet coefficients of measured acoustic emission signals in case of applied voltage 20[kv]. Since the parameter assessment using all wavelet coefficients will often turn out leads to inefficient or inaccurate results, we selected that level-3 stage of multi decomposition in discrete wavelet transform. We applied FIR(Finite Impulse Response)digital filter algorithm in discrete to suppression for random noise. The white noise be included high frequency component denoised as decomposition of discrete wavelet transform level-3. We make use of the feature extraction parameter namely, maximum value of acoustic emission signal, average value, dispersion, skewness, kurtosis, etc. The effectiveness of this new method has been verified on ability a diagnosis transformer go through feature extraction in stage of acting(the early period, the last period) .

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.41-45
• /
• 2010

Image processing techniques are fundamental in human vision-based image information processing. There have been widely studied areas such as image transformation, image enhancement, image restoration, and image compression. One of research subgoals in those areas is enhancing image information for the correct information retrieval. As a fundamental task for the image recognition and interpretation, image enhancement includes noise filtering techniques. Conventional filtering algorithms may have high noise removal rate but usually have difficulty in conserving boundary information. As a result, they often use additional image processing algorithms in compensation for the tradeoff of more CPU time and higher possibility of information loss. In this paper, we propose a Fuzzy Mask Filtering algorithm that has high noise removal rate but lesser problems in above-mentioned side-effects. Our algorithm firstly decides a threshold based on fuzzy logic with information from masks. Then it decides the output pixel value by that threshold. In a designed experiment that has random impulse noise and salt pepper noise, the proposed algorithm was more effective in noise removal without information loss.