• Convergence Security Journal
• /
• v.15 no.3_1
• /
• pp.99-105
• /
• 2015

A typical SRAM-based PUF is used in random number generation and key exchange process. The generated out puts should be preserved, but the values are changed owing to the external environment. This paper presents a new D-PUF logic employing a dual anti-fuse OTP memory to the SRAM-based PUF. The proposed PUF can enhance the reliability of the logic since it can preserve the output values. First, we construct the OTP memory using an anti-fuse. After power up, a SRAM generates the random values owing to the mismatch of cross coupled inverter pair. The generated random values are programed in the proposed anti-fuse ROM. The values that were programed in the ROM at once will not be changed and returned. Thus, the outputs of the proposed D-PUF are not affected by the environment variable such as the operation voltage and temperature variation, etc. Consequently, the reliability of the proposed PUF will be enhanced owing to the proposed dual anti-fuse ROM. Therefore, the proposed D-PUF can be stably operated, in particular, without the powerful ECC in the external environment that are changed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.318-323
• /
• 1981

This study was conducted to establish an effective radiation treatment and selection method for induced mutants in M_1 population of soybean treated with gamma-ray. About 64% of total M_1 plants was reduced in plant height up to 50 - 60% and among which 60 - 70% of the plants were contained mutations in M_2 generation. About 60% of the MI plants have born 6 - 15 seeds per plant and 50 - 60% of their progenies produced mutants in M_2 generation. Positive correlation between plant height and number of seeds per plant in M_1 population was found. Higher visible macro-mutation rate in M_2 was observed in the groups of reduced plant height and seed number in the M_1 generation, whereas the frequency of chlorophyll mutation was increased in the group of less damaged plants. The size of mutation sector was increased with reduction in number of seeds per M_1 plant and the mutants were occurred at random in all the parts of M_1 plants. For the effective selection of mutants in soybean mutation breeding, the M_1 seeds should be harvested from the radiation damaged M_1 plants with the application of higher doses of mutagens, and handling M_2 generation by bulk population method is recommendable.

• IE interfaces
• /
• v.25 no.1
• /
• pp.127-133
• /
• 2012

This paper considers the preventive maintenance scheduling problem of the cluster tool which is one of the most important manufacturing equipments in the next-generation semiconductor production environment. We define a random process that expresses the successive amount of chemicals accumulating inside the tool. Based on the renewal theory, we find the expected value and probability distribution of the time that the amount of accumulated chemicals exceeds a predetermined level. For a given probability that the accumulated chemicals exceeds the predetermined level we present a method to obtain the number of chamber operations to perform the preventive maintenance of that chamber. In addition, a method to get the preventive maintenance schedule for the whole cluster tool is presented. A numerical example is provided to illustrate our method.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.36-41
• /
• 2002

In this study we produced 1-dimensional p wave velocity structure of the crust using 449 P arrivals of 35 stations and we analysed hypocenters of the southeastern Korean peninsula area. A initial velocity model was selected from the priori studies and 30 different initial models were generated using random number generation from it. Using the veriest program 30 different velocity structures were calculated and the result show that velocities are 5.8 - 6.4 km/sec within 6 - 16 km depth and 7 $\pm$ 0.2 km/sec within 20 - 30 km with resonable resolution. Hypocenters were relocated by using resulted 1-dimensional velocity model as a initial model. Recalculated hypocenters'depth are shallower than initial data and epicenters show a little better lineality around study area but more much earthquake information are needed fur the determination of relation between epicenter distribution and geological tectonic structures.

• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.147-154
• /
• 1992

A computer simulation of earthquake sequence in the time and magnitude space was done using random number generation. The theory of the simulation are based on the two statistical models of earthquake events. Those models are Stationary Poisson Process for independent earthquakes and Branching Markov Process for aftershocks. The generated earthquake sequnces resemble the actual earthquake catalogs.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.834-836
• /
• 2009

The authors have been discussed the optimal voltage regulation method and on-line real time method using artificial neural networks in the distribution system interconnected with Distributed Generation and Storage(DSG) systems. However, these methods have difficulty in dealing with the random load variations and operation characteristics of a number of DSG systems. To overcome these problems, this paper shows the basic concepts of smart grid system which is considered as one of the power delivery system in the near future and presents an evaluation method on the impacts of customer voltages by the operation of smart grid system. The smart grid system can change the system configuration in a flexible manner by using the static switches and offer the different power qualities in power services through the power quality control centers.

• Journal of Korean Society for Quality Management
• /
• v.26 no.4
• /
• pp.250-264
• /
• 1998

The purpose of the thesis is to develop simulation program for forecasting of optical connector. So we can achieve the time and the money saving for making the optical connector. Optical performance (insertion loss) of optical connector mainly relies on 3 misalignment factors-ferrule factor due to mis-manufacture from design, auto-centering effect that is fiber behavior phenomena between hole and fiber, fiber misalignment factor. Simulation use experimental data with auto-centering effect and fiber factor and use pseudo data with ferrule through random number generation because it is developing stage. In this study we a, pp.y kernel density estimation method with experimental data in order to know whether it belong to or not specific parametric distribution family. And we simulate to forecast insertion loss of optical multifiber connector under specific design model using nonparametric bootstrap resampling data and parametric pseudo samples from uniform distribution. We obtain the tolerance specifications of misalignment factors satisfying not exceed in maximum 1.0dB and choose optimal hole diameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6B
• /
• pp.523-532
• /
• 2003

GENMET(GEneralized Multihop Network) which is based on Wavelength-Division Multiplexsing(WDM) and can be used in order to construct the next generation lightwave network is a logical(virtual), packet-switched and multihop topology network. GENMET is a regular multihop network which is a generalization of Shuffle network and do Bruijn network As such, it has the advantage of simple routing which is critical in a high speed network Given a physical topology, different logical topologies can be derived for assigning wavelengths to the UserNodes. By appropriately assigning wavelengths, performance of the network, such as mean hop count, maximum throughput and mean packet delay can be improved. In this paper, we propose heuristic algorithms for effectively assigning a limited number of wavelengths to the given UserNodes. The Performance of proposed algorithm is compared with the random assignment and the lower bounds.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.228-234
• /
• 2010

This paper investigates the conducted-noise characteristics of a digitally-controlled randomly-switched dc-dc converter. In order to investigate the effect of the suggested digital controller on the conducted-noise characteristics of a dc-dc converter, three factors have been studied: the field-programmable gate array (FPGA) clock speed, the randomization ratio percentage, and the effect of using a closed loop feedback controller. A field-programmable gate array is much more flexible than analog control circuits, has a lower cost, and can be used for power supply applications. A novel FPGA-based implementation has been suggested for obtaining the experimental validations and realizing the studied concepts. Furthermore, the experimental results have been discussed and design guidelines have been included.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.205-216
• /
• 1996

In this paper we propose an efficient robust path delay fault test genration algorithm for detection of path delay faluts in combinational ligic circuits. In the proposed robust test genration approach, the testability measure is computed for all gates in the circuit under test and these computed values are used to genrate weighted random delay test vetors for detection of path delay faults. For genrated robust test vectors, we perform fault simulation on ISCAS '85 benchmark circuits using parallel pattern technqieus. The results indicate that the proposed test genration method not only increases the number of detected robust path delay faults but also reduces the time taen to genrate robust tests.