• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.763-771
• /
• 2008

Uncertainties are pervasive in engineering geological problems. Therefore, the presence of uncertainties and their significance in analysis and design of slopes have been recognized. Since the uncertainties cannot be taken into account by the conventional deterministic approaches in slope stability analysis, the probabilistic analysis has been considered as the primary tool for representing uncertainties in mathematical models. However, some uncertainties are caused by incomplete information due to lack of information, and those uncertainties cannot be handled appropriately by the probabilistic approach. For those uncertainties, the theory of fuzzy sets is more appropriate. Therefore, in this study, fuzzy reliability analysis has been proposed in order to deal with the uncertainties which cannot be quantified in the probabilistic analysis due to the limited information. For the practical example, a slope is selected in this study and both the probabilistic analysis and the fuzzy reliability analysis have been carried out for planar failure. In the fuzzy reliability analysis, the dip angle and internal friction angle of discontinuity are considered as triangular fuzzy numbers since the random properties of the variables cannot be obtained completely under the conditions of limited information. In the study, the fuzzy reliability index and the probabilities of failure are evaluated from fuzzy arithmetic and compared to those from the probabilistic approach using Monte Carlo simulation and point estimate method. The analysis results show that the fuzzy reliability analysis is more appropriate for the condition that the uncertainties arise due to incomplete information.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.158-167
• /
• 2016

This study evaluates potential sources of errors in k-NN(k-nearest neighbor) algorithm such as procedures, variables, and input data. Previous research has been thoroughly reviewed for understanding fundamentals of k-NN algorithm that has been widely used for short-term traffic states prediction. The framework of this algorithm commonly includes historical data smoothing, pattern database, similarity measure, k-value, and prediction horizon. The outcomes of this study suggests that: i) historical data smoothing is recommended to reduce random noise of measured traffic data; ii) the historical database should contain traffic state information on both normal and event conditions; and iii) trial and error method can improve the prediction accuracy by better searching for the optimum input time series and k-value. The study results also demonstrates that predicted error increases with the duration of prediction horizon and rapidly changing traffic states.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.287-296
• /
• 2012

This study is analysis of the existing domestic terrorism factors and suggest countermeasures for political leadership that can occur to the precautionary terror occasion of the presidential election approached 100 days in the future. Political terror caused mainly achieved peak of Ideology or social conflict by Politically alienated class. Common cause is most likely to occur when the party or the government want to attack a target or can not stand disadvantaged and lose that I suppert the party or the government. 21st century political terror is occurred with Misfits of complaints expressed or social conflict more frequency than attack used random people, new weqpon and bomb. It is interpreted that issued as a drastic measure from individual complaint because of increased polarization of wealth by separate into group and fallen law and order but also we are not familiar with the political compromises. Personal safety escort mission is essential condition of political activity that Absolute personal protection and to come up with a large number of voters for best result. Thus security guard ought to professional security activity depend on gathered situation, location and regional feature for perfect protection service.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.161-172
• /
• 2018

Purpose: During tillage operations, the selection of a working machine (tool) depends on the soil conditions as well as the type of tillage operation to be performed. The goal of this research was to ascertain the effects of varying working machine parameters of a compact disc harrow on tillage operations under various soil moisture content (SMC) conditions. Methods: The working machine parameters were the disc spacing and machine speed. The tillage parameters under investigation were the soil inversion ratio (SIR), tillage cutting depth (TCD), and soil clod breakage ratio (SCB). To determine the SIR, the areas of the white regions before and after tillage were obtained. The ratio of the difference of the areas of the white regions before and after tillage to the area of the white regions before tillage was considered as the SIR. The SCB was obtained as the ratio of the weight of soil clods after sieving with a mesh size of <0.02 m to the total weight of the soil clods before sieving. The soil TCD was measured using a tape measure at random points after the tillage operation. The resulting data were statistically analyzed in a one-way analysis of variance. Results: The highest soil inversion was achieved when the machine speed was 0.2 m/s with the disc spaced at 0.2 m in the 16.5% SMC. At a 0.4-m/s machine speed and 0.3-m disc spacing the highest soil breakage was achieved in the 26.5% SMC. The highest TCD was achieved at a 0.2-m/s machine speed and 0.2-m disc spacing in the 16.5% SMC. Conclusions: It was concluded that varying the working machine parameters, such as the disc spacing and machine speed, could significantly affect the soil inversion and soil clod breakage; however, it had no significant impact on the TCD.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1471-1485
• /
• 2013

The purpose of this study was to develop a HAM (Heuristic Attention Model) by analyzing the difference between eye movements according to the science achievement of elementary school students on discrimination task. Science achievement was graded by the results of the Korea national achievement test conducted in 2012 for a random sampling of classes. As an assessment tool to check discrimination task, two discrimination measure problems from TSPS (Test of Science Process Skill, developed in 1994) which were suitable for an eye tracking system were adopted. The subjects of this study were 20 students from the sixth grade who agreed to participate in the research. SMI was used to collect EMD (eye movement data). Experiment 3.2 and BeGaze 3.2 programs were used to plan experiments and analyze EMD. As a result, eye movements of participants in discrimination tasks varied greatly in counts and duration of fixation, first fixation duration, and dwell time, according to students' science achievement and difficulty of the problems. By the analysis of EMD, strategies of the students' problem-solving could be found. During problem solving, subjects' eye movements were affected by visual attention; bottom-up attention, top-down attention and convert attention, and aflunter attention. In conclusion, HAM was developed, and it is believed to help in the development of a science learning program for underachievers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.111-121
• /
• 1995

In Extracting the dynamic parameters for estimating the load carrying capacity and integrity of bridges, both the instrumentation and the processing the data plays important role . When the fixed point can not be secured, it is difficult and expensive to measure dynamic displacements. Even if the displacement is obtained through the integration of the acceleration data, the results can be quite different from the real behavior, because the main frequency contents can be leaked during discretized data processing. The instrumentation is used for measurements, and every measurement involves error and uncertainty, such as systematic, conformance, environmental, observational, sampling, and ranmom error. Systematic and conformance error can be remedied through the proper sellection and installation of the instruments, but sampling and random errors could not have been corrected properly and it becomes the limitation for using acceleration data. In this paper, the errors which can be occurred in numerical processing of dynamic data are referred, and the method to sellect proper sampling rate for the structural frequency range are proposed. Using the proposed method, the displacement response of the structures can be economically obtained from the measured acceleration record, and this procedure can be used properly to estimate the integrity of the bridges and infrastructures subjected to dynamic loads.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.21-32
• /
• 2013

This is a preliminary study for the real-time feedback vibration control of building structures. The study developed a wireless acceleration sensor system based on authentic technology capacities, to integrate with the Prototype AMD system and ultimately construct the feedback vibration control system. These systems were used to evaluate the basic performance levels of the control systems within model building structures. For this purpose, the study first developed a wireless acceleration sensor unit that integrates an MEMS sensor device and bluetooth communication module. Also, the study developed an operating program that enables control output based on real-time acceleration response measurement and control law. Furthermore, the Prototype AMD and motor driver system were constructed to be maneuvered by the AC servo-motor. Eventually, all these compositions were used to evaluate the real-time feedback vibration control system of a 2-story model building, and qualitatively measure the extent of vibrational reduction of the target structure within the laboratory validation tests. As a result of the tests, there was a definite vibrational reduction effect within the laboratory validation tests. As a result of the tests, there was a definite vibrational reduction effect within 1st and 2nd resonance frequency as well as the random frequency of the model building structure. Ultimately, this study confirmed the potential of its wireless acceleration sensor system and AMD system as an effective tool that can be applied to the active vibration control of other structures.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.185-193
• /
• 2020

This purpose of this study was to investigate the effects of 16-week long-term walking exercise on the feeling, mood state, and life stress of college students. Participations in this study were 50 college students, and 24 Walking Group and 26 Control Group were random sampled to experiment the psychological effect of exercise walking. The experimental design was designed by factorial design by 2×3 repeated measurements. Data collection was conducted for 0week, 8week, 16week of feeling, mood state and life stress of college students. As a result, WG showed a positive increase in feeling status compared to CG. Negative mood state such as tension, anger, depression, fatigue, and confusion have been greatly reduced, vigor has increased, and stress on college student life such as friends, study, economy, future, and values has decreased statistically. The results of this study can be used as a way of coping with the stress of college students to improve their study motivation and quality of life.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.196-204
• /
• 1997

우리 나라는 한해에 안전사고로 인해 12만 .+-. 2만명정도의 재해자를 발생시키고 있으며, 재해의 천국이라는 오명까지 얻게 되었다. 따라서 본 연구는 우리나라의 산업안전관리자의 안전의식을 분석함으로써 재해발생의 감소에 일조를 하고자 함을 본 연구의 목적으로 한다. 연구기간은 1997년 3월에서 8월까지며, 총 200여명의 강원지역의 산업안전관리자들을 대상 으로 설문조사하여, 그중 불성실하게 답한 것을 제외한 183명의 관리자들의 응답결과를 토 대로 통계분석을 실시하였다. 연구내용은 안전의식에 대한 설문조사를 통하여 그들의 근무 조건과 안전에 대한 지식정도, 현 직장에의 만족과 불만족요인과 자주 쓰는 재해통해방법들을 조사하여 우리나라의 안전관리자들의 현 상황을 유추해 보고자 시도하였다. 분석결과 183명 중 여성은 불과 3명뿐이며, 83%가 기혼이며, 대졸은 전체의 25.1%이며, 59.6%가 고졸이며 , 전문대졸은 15.2%나 되었다. 전담 안전관리자는 전체의 8%에 불과했으며, 대부분 겸임을 하고 있었다. 놀라운 것은 안전관리자들의 92.6%가 안전관리자격증이 없었으며, 2급이 4.7% 에 불과했다. 과거에 부상을 당한 경험이 있는 안전관리자는 전체의 26.3%에 달해 회사가 부상을 당한 근로자를 안전부서로 발령한다는 사실을 확인할 수 있었다. 다친 원인의 50%가 시설물 결함으로 나타나 작업환경개선이 시급함을 알 수가 있었다. 우리나라도 선진국과 같은 교욱담당의 NIOSH와 제재담당의 OSHA와 같은 기관의 설립이 보다 효율적이고 근본적인 안전 관리의 문제해결책이라고 사료된다. 열악한 중소기업에 나라에서 안전교육을 담당해 주는 대신 기업은 근로자들에게 보다 안전한 환경을 제공해야 된다는 것이 이러한 기관설립의 목적이라고 하겠다. 더 나아가 이를 총괄하는 안전관리청의 신설이 보다 근본적인 문제해결을 제공해 줄 수 있을 것으로 사료된다.의 결과는 자전거 에르고노미터의 결과가 트레드밀의 결과에 87.60%정도 나타났다.음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively related to the

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.142-151
• /
• 1997

본 연구는 주부들의 주활동공간인 부엌가구와 공간의 설계에 있어사용하기 편리하며 가사활동에 따 른 피로를 경감시키고 요통과 같은 주부직업병을 예방할 수 있는 부엌가구와 공간의 개발에 그 목적을 두었다. 연구는 먼저 수도권의 32평형 규모의 아파트150가구를 대상으로 설문조사를 실시하였으며, 만 24시간동안의 실제 가사활동을 Video로 촬영하여 동작분석을 실시하였다. 그 결과 주부들은 수납의 용 이성과 공간의 크기, 작업대의 높이 등을 가장 많은 개선사항으로 지적하였으며, 절반이상의 주부들이 앉은 자세에서 작업이 이루어졌으면 좋겠다고 응답하였다. 또한 동작분석 결과 작업의 70%이상이 개수 대를 중심으로 조리대와 가열대 주변의 한정된 공간에서정적으로 선 자세에서이루어지는 것으로 파악 되었다. 이러한 선 자세에서의 작업에 따른 피로도를 감소시키기 위하여 입좌식 의자를 도입하였으며, 개수대를 씽크대의 'ㄱ'자 코너에 위치하여 주방활동시의 이동거리를 단축하고자 하였다. 피로도의 경감 을 측정하기 위하여 입좌식 의자를 도입한 개선된 씽크대와 기존의 입식씽크대에서 가사활동시 요구되는 주부들의 에너지 대사량을 비교하기 위하여 심장박동수와 산소호흡량을 측정하였다. 실험결과에 따르면 주방에 입좌식의자를 도입한 경우가 가사활동에 요구되는 에너지 소모량이 심장박동수와 산소호흡량의 기준에서 각각 평균적으로 30%와 57.5% 이상이 감소하는 것으로 파악되어 이러한 부엌가구의 도입으로 주부들의 가사활동에따른 피로도가 절반 가까이 감소될 수 있음을 니타내었다. 또한 부엌가구의 재배치 에따른 가사활동시 이동거리가 평균적으로5.5%이상이 감소하는 것으로 나타났다. 본 연구결과를 주방설 계에 적용할 경우 가사활동의 효율성과 편리성이 향샹됨은 물론 가사활동에따른 피로도를 경감 시키고 요통 등의 주부직업병을 예방할 수 있을 것으로 기대된다.1일 1회씩 4회 투여한 군에서도 암수에 상관없이 전 농도 군에서 염색체이상을 나타내지 않아 유전독성을 나타내지 않음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are signif