• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.477-488
• /
• 1997

In order to control vibration in structures, it is desirable to be able to identify dominant paths of vibration transmission from sources through the structure to some points of interest. Structural intensity vector(power flow per width of cross section) using cross spectra is able to measure the vibration power flow at a point in a structure. This paper describes the structural intensity measurement of 2-dimensional structure. Structural intensity of 2-dimensional structure can be obtained from eight point cross spectral measurement per axis, or two point measurement per axis on the assumption of far field. Approximate formulation of the relation between bending waves in structures and structural intensity makes it possible to separate the wave components by which one can get a state of the vibration field. Experimental results are obtained on an infinite plate at the near and far field in flexural vibration. The measurement error of two point measurement is rather bigger than eight point measurement on account of the assumption that Poisson's ratio is 1. The structural intensity vectors on the plate are checked the ability to identify the path of vibration power flow in random excitation and 200Hz sine excitation, the result of two point measurememt is almost the same as the result of eight point measurement in 200Hz sine excitation.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.2
• /
• pp.207-211
• /
• 2010

Storage Class Memory (SCM) has both characteristics of non-volatility and random byte addressability. The advent of SCM can bring about novel and innovative features that are not possible in con ventional computing systems. This paper suggests a new system design that turns on/off a system instantly. To do this, we replace the main memory with SCM to retain the volatile system states as the system is turned off. We implement our prototype in an embedded environment and measure its system on/off time.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.202-205
• /
• 2005

The purpose of this work is to identify the characteristic of eye movement for visual training of the elderly. This investigation is to examine the relationship between the head and the eye motor system for the localization of visual target direction in three-dimensional space. All experiments were performed in a soundproof chamber. Twenty-one red LEDs (Light-Emitting Diode, Brightness: 20cd/$m^2$) arrayed in three lines on a half circle-surrounding panel are used. LEDs are horizontally 30 degree apart and vertically 20 degree apart from each other. The condition of stimulation is random and anti-saccade. Physiological parameter such as EOG (Electro-Oculography) was measured by BIOPAC system. We measure the mean latency time, which is the time from the start of visual stimulation to the response of the human body. The result shows that the mean latency time is short in the case of the condition of anti-saccade, the fixed head and a quarter visual stimulation. This finding can be used in developing programs for various visual improvements for the elderly by analyzing the characteristic of eye movement.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2033-2036
• /
• 2013

Many studies have suggested that the XRCC1 Arg280His gene polymorphism might be involved in the development of hepatocellular carcinoma (HCC). However, the results have been inconsistent. In this study, the authors performed a meta-analysis to assess the association between XRCC1 Arg280His and HCC susceptibility. Published literature from PubMed, EMBASE and CNKI Data was searched. Pooled odds ratios (ORs) and 95% confidence intervals (CIs) were calculated using fixed- or random-effects models when appropriate. Begg's test was used to measure publication bias. A total of 7 case-control studies covering 1,448 HCC cases and 1,544 controls were included. No significant variation in HCC risk was detected in any of the genetic models overall. In the stratified analysis, four studies with sample sizes over 300 produced similar results. The corresponding pooled ORs were not substantially altered after the exclusion of three studies deviating from Hardy-Weinberg equilibrium in the control group, which indicated reliability for our meta-analysis results.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.2E
• /
• pp.79-84
• /
• 2006

Acoustic characteristics of a sound absorbing material can be identified, if the characteristic impedance and propagation constants are known, which have generally been determined experimentally. One easy method determining these two essential parameters is to measure the one dimensional wave characteristics in the impedance tube. In th udy, the effects of backing conditions on the impedance tube measurement have been examined using several pairs of generally used end conditions. The results showed that the measured values are similar for most pairs of end conditions: however, it was observed that the measured characteristic impedance for different thickness did not agree well for some pairs. In this work, the multi termination method, using three or more known backing con ns, was suggested to reduce such random errors, which are mostly caused by the test procedure. Employing three terminations as a set, comprised of a rigid end, an end with porous material, and an end with a backing cavity, it was demonstrated that improved measured results could be obtained for an open cell PU foam varying widely with three different thicknesses.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.47-58
• /
• 1985

A new approach is develped to analyze the reliability of the shallow foundation. The measure of the safety of the structhure is expressed In terms of the probability of failure, instead of the conventional factor of safety. Many uncertainties involved in the deterministic stability anaitsis can be reasouably treated by using the probabilistic approach. Both the soil properties and loads are assumed to be random variables. Accordingly, the capacity and demand are considered to be normal, log-normal, and beta variated. Use is made of Error Propagation Method to investigate the probability of failure. And the relationship is investigated between the probability of failure and the central factor of safety. The results are computer programed and several case studies are performed using developed program.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.869-878
• /
• 2009

Image restoration techniques such as noise reduction and contrast enhancement have been researched for enhancing a contaminated image by the noise. An image degraded by additive random noise can be enhanced by noise reduction. Sigma filtering is one of the most widely used method to reduce the noise. In this paper, we propose a new sigma filter algorithm based on noise variance estimation which effectively enhances the degraded image by noise. Specifically, the Bartlett test is used to measure the degree of noise with respect to the degree of image feature. Simulation results are also given to show the performance of the proposed algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.447-459
• /
• 2010

The present study was carried out to summarize the effect of propolis in the diabetic rats by meta-analysis related studies. The association measure to test effect of propolis was Hedges's standardized mean difference between group of rats induced streptozotocin(STZ) or alloxan and group of rats induced STZ or alloxan treated with propolis about the considered 4 effect factors. In this particular fixed-effect model, blood glucose, Cholesterol, Triglyceride were significantly reduce. The case of heterogenous variable such as body weight, blood glucose, cholesterol, triglyceride, random-effect model was applied. In this model, blood glucose, triglyceride were decreased significantly in propolis treated group. According to the meta-regression analysis, period of injection was significant for body weight and blood glucose, cholesterol.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.418-420
• /
• 2005

This paper proposed ultrasonic distance measurement module development for correct distance detection with collision escaping or obstacle of mobile robot is traveling self-regulation. Representative ultrasonic module applied in existing was Polaroid company's 6500 series and Devantech company's SRF04/SRF08 series. This ultrasonic sensors are corrupted by systematic errors due mainly to the dependency of sound speed upon surrounding conditions and random errors of uncertain origin. Therefore Ultrasonic distance detecting means of error compensation method and high definition, narrow beam angle, board area distance detecting means to apply to ultrasonic mobile robot control urgently need. In this paper use internal type temperature compensation method to improve problem of ultrasonic distance measurement method instead of that volume that have shortcoming of used correct temperature compensation methods applied big addition device. Compensate error by environment change of temperature. Humidity density etc. and is applicable to mobile robot offering various interface and real-time processing developed possible distance measurement module.