• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.

• 항공우주기술
• /
• 제5권2호
• /
• pp.102-107
• /
• 2006

본 논문은 위성체 동적 환경의 발사체 구조에 의해 전달된 저 주파수의 과도 진동과 불 규칙적인 가속력으로 구성되어 있다. 저 주파수에서의 과도 진동은 보통 진동수 100 ~ 200Hz에 이르는 정현파로 근사되며 주로 예비설계에 사용된다. 그리고, 랜덤 환경은 발사체의 연소와 분리 단계, 외부 공력소 음에 의한 구조적 진동에 의해 발생한다. 이는 발사체 구조물을 통하여 위성체와 발사체의 어댑터 구조로 전달된다. 이러한 동적환경 중에서 랜덤 진동 해석은 위성체에 수행되는데, 특히, 위성체 내의 전자 박스(장비) 는 실제 상황에 가깝게 하여 검증하기 위해 랜덤 진동 실험을 통해 설계 되야 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.374-379
• /
• 2001

The satellite electronic equipment is exposed to high level random vibration environment during the launch of spacecraft. The random vibration can cause damage of electronic equipment. Thus very careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of transponder equipments of communication satellite. For the structural integrity of the communication satellite transponder equipment under qualification level random vibration, Finite Element analysis was carried out using the commercial code, MSC/Nastran and ANSYS and stress levels are presented. In order to validate the femodel, modal test was also performed and compared with numerical results.

• 소음진동
• /
• 제10권6호
• /
• pp.971-976
• /
• 2000

High level random vibration environments induced while launching of spacecraft can damage sensitive electronic equipment, unless the equipment is properly packaged. Thus careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of electronic equipment of spacecraft. This paper describes the development process of Solar Array Regulator for KOMPAT-2, which is designed and tested by Korean engineers. Both analytical and experimental techniques are introduced in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.966-970
• /
• 2005

On the basis of the development of KSLV-1, KoDSat was designed and manufactured to demonstrate the performance of KSLV-1. KoDSat is exposed to a severe vibrational environment at launch. The structural reliability of KoDSat has to be verified using vibrational test. The structural compatibility and verification of components between analysis and test can be proved using environmental vibration test. In this paper, we review the structural characteristic of thruster control unit for a space launch vehicle and design TCU housing using mathematical model. In order to verify the structural compatibility and reliability, half-sine shock, random and sing sweep vibration test was performed. Especially, sing sweep vibration test result is compared with analysis result and mathematical model is verified.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1246-1251
• /
• 2000

High level random vibration environments induced while launching of spacecraft can damage sensitive electronic equipment very rapidly, unless the equipment is properly packaged. Thus very careful consideration on the launch environment, especially for high level random vibration, is required in the design stage of electronic equipment of spacecraft. This paper describes the development process of Solar Array Regulator for KOMPAT-2, which is designed and tested by Korean engineers. Both analytical and experimental techniques are introduced in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.224-227
• /
• 2007

This paper introduces the results of acoustic loads test conducted on the upper stage assembly of KSLV-I, which is the first Korea space launch vehicle. A launch vehicle and its payloads are subjected to severe acoustic pressure loading when they lift off and ascent during the transonic periods. Acoustic loadings are spreaded out broad frequncy-spectrum up to 10,000Hz. Acoustic loads are a primary source of structural random vibration of the upper stage and payloads. Therefore, in order to verify the structural integrity of the upper stage assembly of KSLV-I and the survivability of its components under severe random vibration environment, acoustic loads test is conducted in the high intensity acoustic chamber with 142dB (overall SPL). The results show the structural design and component random vibration specifications well meet with the environmental requirements.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.120-128
• /
• 2004

The impulse between launch vehicle and atmosphere can generate a lot of noise and vibration during the process of launching a satellite. Structurally, the electronic equipment of a satellite consists of an aluminum case containing PCB. Each PCB has resistors and IC. Noise and vibration of the wide frequency band are transferred to the inside of fairing, subsequently creating vibration of the electronic equipment of the satellite. In this situation, random vibration can cause malfunctioning of the electronic equipment of the device. Furthermore, when the frequency of random vibration meets with natural frequency of PCB, fatigue fracture may occur in the part of solder joint. The launching environment, thus, needs to be carefully considered when designing the electronic equipment of a satellite. In general, the safety of the electronic equipment is supposed to be related to the natural frequency, shapes of mode and dynamic deflection of PCB in the electronic equipment. Structural vibration analysis of PCB and its electronic components can be performed using either FEM or vibration test. In this study, the natural frequency and dynamic deflection of PCB are measured by FEM, and the safety of the electronic components of PCB is evaluated according to the results. This study presents a unique method for finite element modeling and analysis of PCB and its electronic components. The results of FEA are verified by vibration test. The method proposed herein may be applicable to various designs ranging from the electronic equipments of a satellite to home electronics.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.777-783
• /
• 2021

항공기는 기동 중 다양한 진동의 영향을 받게 된다. 이러한 진동들은 상황에 따라서는 항공기 생존에 치명적인 영향을 미칠 수 있으므로 항공기에 적용되는 구성품들은 랜덤 진동해석을 통해 다양한 진동 조건에 대한 안전성이 입증되어야 한다. 본 연구에서는 상용 소프트웨어인 MSC.Random을 사용하여 랜덤진동 조건에서 군용항공기 외부연료탱크와 파일런에 대한 구조 강건성을 평가하였다. 랜덤 진동해석은 경계조건 지점에 단위하중을 부과하여 주파수 응답해석을 수행한 후 파워 스펙트럼 밀도 프로파일로 가진하게 되는데, 이 과정에서 필요한 모드 데이타는 모달해석 방법을 통해 추출하였다. 그리고, 랜덤진동 조건으로 미국 국방환경규격에서 규정하고 있는 랜덤 진동 프로파일을 적용하였고, G 단위로 주어진 파워 스펙트럼 밀도 프로파일을 중력가속도 단위로 변환하여 사용하였다. 수치해석 결과로, x축, y축 및 z축 방향에서의 랜덤 가진에 대해 수치해석 모델을 구성하는 빔 요소, 쉘 요소 그리고 솔리드 요소의 안전여유를 파악하여 본 논문에서 다루고 있는 군용 항공기에 장착되는 외부연료탱크와 파일런의 구조 강건성을 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.877-881
• /
• 2001

In this paper, a model is developed that can predict insulation performance of sound barrier systems under the action of multiple random point impact. The predicted results are compared with the measured results obtained by using APAMAT II. The results show the error due to the difference between experimental environment and theoretical assumptions. The model is needed to be improved to obtain better agreement between predicted and measured results.