• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.511-515
• /
• 2013

A Monte Carlo (MC) simulation study has been done in order to investigate the effects of line-edge-roughness (LER) induced by either 1P1E (single-patterning and single-etching) or 2P2E (double-patterning and double-etching) on fully-depleted silicon-on-insulator (FDSOI) tri-gate metal-oxide-semiconductor field-effect transistors (MOSFETs). Three parameters for characterizing the LER profile [i.e., root-mean square deviation (${\sigma}$), correlation length (${\zeta}$), and fractal dimension (D)] are extracted from the image-processed scanning electron microscopy (SEM) image for each photolithography method. It is experimentally verified that two parameters (i.e., ${\sigma}$ and D) are almost the same in each case, but the correlation length in the 2P2E case is longer than that in the 1P1E case. The 2P2E-LER-induced $V_TH$ variation in FDSOI tri-gate MOSFETs is smaller than the 1P1E-LER-induced $V_TH$ variation. The total random variation in $V_TH$, however, is very dependent on the other major random variation sources, such as random dopant fluctuation (RDF) and work-function variation (WFV).

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.813-820
• /
• 2010

The spread mooring system for FPSO is developed to explore deep sea area, in which swell is dominant. It is known that the tension response of mooring lines in this sea area shows bimodal spectrum. Assuming normal distribution of tension profile and Rayleigh distribution of tension amplitude, the power spectral density function (PSD) of the mooring tension under the bimodal stationary random process is applied for the calculation of spectrum fatigue. Three popular methods, which are simple summation method, combined spectrum method and Jioa-Moan method, are used to combine fatigue damages from bimodal spectrum characteristics. Each damage value is compared with damage using Rainflow Cycle Counting (RCC) method which is believed to be close to exact solution. Vanmarcke' parameter and RMS(Root Mean Square) ratio are employed to assess relative damage variations between from RCC method and from three combination methods. Finally the most reliable fatigue damage combining method for spread mooring system is suggested.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.31.1-31.7
• /
• 2019

Background: To test the hypothesis that in profile smiling view, for ideal aesthetics, a tangent to the labial face of the maxillary central incisor crowns should be approximately parallel to the true vertical line and thereby perpendicular to the true horizontal line. Methods: An idealized female image was created with computer software and manipulated using the same software to construct an "ideal" female profile image with proportions, and linear and angular soft tissue measurements, based on currently accepted criteria for idealized Caucasian profiles. The maxillary incisor labial face tangent was altered in 5° increments from 70 to 120°, creating a range of images, shown in random order to 70 observers (56 lay people and 14 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers. Results: The most attractive inclination of a tangent to the labial face of the maxillary incisor crowns in profile view in relation to the true horizontal line was 85°, i.e. 5° retroclined from a perpendicular 90° inclination. The most attractive range appears to be between 80 and 90°. Excessive proclination appeared to be less desirable than retroclination. Beyond 105° most observers recommend treatment. Conclusion: In natural head position, the ideal inclination of the maxillary incisor crown labial face tangent in profile view will be approximately parallel to the true vertical line and thereby approximately perpendicular to the true horizontal line.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.99-106
• /
• 1996

Two types of regularization method (singular system and HMP approaches) for generating depth-concentration profiles from angle-resolved XPS data were evaluated. Both approaches showed qualitatively similar results although they employed different numerical algorithms. The application of the regularization method to simulated data demonhstrates its excellent utility for the complex depth profile system . It includes the stable restoration of depth-concentration profiles from the data with considerable random error and the self choice of smoothing parameter that is imperative for the successful application of the regularization method. The self choice of smoothing parameter is based on generalized cross-validation method which lets the data themselves choose the optimal value of the parameter.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1998년도 정기학술강연회 발표논문 초록집 Annual Meeting of Korean Society of Coastal and Ocean Engineers
• /
• pp.5-11
• /
• 1998

Wave nonlinearity and dispersivity have mutually counteracting effects on the wave evolution process; i.e., the former makes the wave profile steeper, while the latter milder. Therefore to describe evolution of nonlinear water waves under general condition such as nonlinear random waves over arbitrary depths, both the wave nonlinearity and dispersivity must be properly taken into account in the wave modeling. (omitted)

• 한국지반공학회논문집
• /
• 제30권5호
• /
• pp.17-24
• /
• 2014

본 논문에서는 국내 CFRD 사력존을 위한 1차원 전단파 속도 분포를 제안하였다. 이를 위해 선정된 3개의 댐 사면 8곳에서 수행된 표면파 시험 결과를 사용하였다. 다양한 원인에 의해 존재 가능한 사력존 물성치 공간 변동성에 의한 표면파 시험 결과의 불확실성을 고려하고자 시험에서 얻어진 개별 주상도들을 하모닉 웨이브릿 변환을 통해 공간-파수 영역에서 분석하였다. 이를 통해 전단파 속도 주상도에 존재하는 불확실성을 평가하였다. 논문에서 제안된 방법을 통해 사력존에 존재 가능한 1차원 전단파 속도 분포들을 생성하였으며, 생성된 1차원 전단파 속도 분포들을 사용하여 물성치 공간 변동성에 의한 불확실성이 고려된 국내 CFRD 사력존의 1차원 전단파 속도 분포를 결정하였다.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.683-690
• /
• 2012

In this work, the semi-active control of a large-sized bus suspension system with an MR damper was studied. An MR damper model that can aptly describe the hysteretic characteristics of an MR damper was adopted. Parameter values of the MR damper model were suitably modified by considering the maximum damping force of a passive damper used in the suspension system of a real large-sized bus. In addition, a fuzzy logic controller was developed for semi-active control of a suspension system with an MR damper. The vertical acceleration at the attachment point of the MR damper and the relative velocity between sprung and unsprung masses were used as input variables, while voltage was used as the output variable. Straight-ahead driving simulations were performed on a road with a random road profile and on a flat road with a bump. In straight-ahead driving simulations, the vertical acceleration and pitch angle were measured to compare the riding performance of a suspension system with a passive damper with that of a suspension with an MR damper. In addition, a single lane change simulation was performed. In the simulation, the lateral acceleration and roll angle were measured in order to compare the handling performance of a suspension system using a passive damper with that of a suspension system using an MR damper.

• 방송공학회논문지
• /
• 제18권3호
• /
• pp.435-444
• /
• 2013

ATSC (Advanced Television System Committee) 지상파 DTV(Digital Television) 방송시스템은 6 MHz 대역폭을 이용하여 최대 19.2 Mbps의 데이터 전송률을 지원하지만, 멀티패스 페이딩이 발생하는 도심 환경에서는 수신 성능이 급격히 나빠지는 단점을 가지고 있다. 도심 환경에서 DTV 수신기의 성능 열화를 개선하기 위해서는 무엇보다 멀티패스 페이딩 채널을 측정하고 분석하는 것이 중요하다. 하지만 ATSC 지상파 DTV 방송시스템의 8-VSB(Vestigial Sideband Modulation) 변조 방식은 동위상 채널에만 DTV 심볼 데이터를 전송하기 때문에, 직교위상 채널을 예측하지 않으면 정확한 멀티패스 페이딩 채널 측정이 어려워진다. 본 논문에서는 지상파 DTV 방송시스템의 VSB 펄스성형 필터를 이용하여 직교위상 채널을 예측하고, 이를 통해 멀티패스 페이딩 채널을 보다 정확하게 측정하는 DTV 채널 프로파일 측정기술을 제안하고 모의실험을 통해서 성능을 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2018-2030
• /
• 2015

A two stage ac drive configuration consisting of a single-phase line commutated rectifier and a three-phase voltage source inverter (VSI) is very common in low and medium power applications. The deterministic pulse width modulation (PWM) methods like sinusoidal PWM (SPWM) could not be considered as an ideal choice for modern drives since they result mechanical vibration and acoustic noise, and limit the application scope. This is due to the incapability of the deterministic PWM strategies in sprawling the harmonic power. The random PWM (RPWM) approaches could solve this issue by creating continuous harmonic profile instead of discrete clusters of dominant harmonics. Insufficient filtering at dc link results in the amplitude distortion of the input dc voltage to the VSI and has the most significant impact on the spectral errors (difference between theoretical and practical spectra). It is obvious that the sprawling effect of RPWM undoubtedly influenced by input fluctuation and the discrete harmonic clusters may reappear. The influence of dc link fluctuation on harmonics and their spreading effect in the VSI remains invalidated. A case study is done with four different filter capacitor values in this paper and results are compared with the constant dc input operation. This paper also proposes an ingenious RPWM, a ripple dosed sinusoidal reference-random carrier PWM (RDSRRCPWM), which has the innate capacity of suppressing the effect of input fluctuation in the output than the other modern PWM methods. MATLAB based simulation study reveals the fundamental component, total harmonic distortion (THD) and harmonic spread factor (HSF) for various modulation indices. The non-ideal dc link is managed well with the developed RDSRRCPWM applied to the VSI and tested in a proto type VSI using the field programmable gate array (FPGA).

• 한국포장학회지
• /
• 제27권3호
• /
• pp.175-180
• /
• 2021

Although it has recently been regulated for use as an eco-friendly policy in Korea, the use of EPS (Expanded Polystyrene) cooling boxes, which are used as cold chain delivery insulation boxes for fresh agricultural and livestock products, is also increasing rapidly as e-commerce logistics such as delivery have increased rapidly due to COVID-19. Studies were conducted to optimize the EPS cooling container through internal air heat flow of CFD (Computational Fluid Dynamics) analysis and FEM (Finite Element Method) random vibration analysis using domestic PSD (Power Spectral Density) profile of the EPS cooling box to which the refrigerant is applied in this study. In the analysis of the internal air heat flow by the refrigerant in the EPS cooling box, the application of vertical protrusions inside was excellent in volume heat flow and internal air temperature distribution. In addition, as a result of random vibration analysis, the internal vertical protrusion gives the rigid effect of the cooling box, so that displacement and stress generation due to vibration during transport are smaller than that of a general cooling container without protrusion. By utilizing the resonance point (frequency) of the EPS cooling box derived by the Model analysis of ANSYS Software, it can be applied to the insulation and cushion packaging design of the EPS product line, which is widely used as insulation and cushion materials.