• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.89-97
• /
• 2021

Purpose: The purpose of this study is to compare and evaluate the dose change according to the gas volume variations in the rectum, which was not included in the treatment plan during radiation therapy for cervical cancer. Materials and methods: Static Intensity Modulated Radiation Therapy (S-IMRT) using a 9-field and Volumetric Modulated Arc Therapy (VMAT) using 2 full-arcs were established with treatment planning system on Computed Tomography images of a human phantom. Random gas parameters were included in the Planning Target Volume(PTV) with a maximum change of 2.0 cm in increments of 0.5 cm. Then, the Conformity Index (CI), Homogeneity Index (HI) and PTV D_max for the target volume were calculated, and the minimum dose (D_min), mean dose (D_mean) and Maximum Dose (D_max) were calculated and compared for OAR(organs at risk). For statistical analysis, T-test was performed to obtain a p-value, where the significance level was set to 0.05. Result: The HI coefficients of determination(R²) of S-IMRT and VMAT were 0.9423 and 0.8223, respectively, indicating a relatively clear correlation, and PTV D_max was found to increase up to 2.8% as the volume of a given gas parameter increased. In case of OAR evaluation, the dose in the bladder did not change with gas volume while a significant dose difference of more than D_mean 700 cGy was confirmed in rectum using both treatment plans at gas volumes of 1.0 cm or more. In all values except for D_mean of bladder, p-value was less than 0.05, confirming a statistically significant difference. Conclusion: In the case of gas generation not considered in the reference treatment plan, as the amount of gas increased, the dose difference at PTV and the dose delivered to the rectum increased. Therefore, during radiation therapy, it is necessary to make efforts to minimize the dose transmission error caused by a large amount of gas volumes in the rectum. Further studies will be necessary to evaluate dose transmission by not only varying the gas volume but also where the gas was located in the treatment field.

• Korean Journal of Psychosomatic Medicine
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2021

Objectives : The purpose of this study is to compare bleeding tendency of selective serotonin reuptake inhibitor (SSRI) and serotonin norepinephrine reuptake inhibitors (SNRI) using platelet function analyzer (PFA-100) in patients with major depressive disorder. Methods : This study is a prospective open-label study conducted by a single institution. A total of 41 subjects diagnosed with major depressive disorder under the DSM-5 diagnostic criteria participated in this study. The subjects were classified into SSRI (escitalopram) groups and SNRI (duloxetine) groups, respectively, according to random assignments. The closure time (CT) was measured using a platelet function analyzer (PFA-100) before each antidepressant was administered and after 6 weeks. Paired-sample t-test was conducted within each group to determine whether a specific antidepressant had an effect on closure time. In order to confirm the relative change in platelet function between the two groups, an independent sample t-test was conducted to compare and analyze the change in closure time between the two groups. Results : There was no significant changes in closure time (CEPI-CT, CADP-CT) before and 6 weeks after drug administration in the SSRI and SNRI groups, and there was no difference in the amount of changes in closure time between the two groups. Conclusions : Our results showed no difference in bleeding tendency between SSRI and SNRI. This study suggests that further large-scale studies on bleeding tendency for various antidepressants are needed in the future.

• The Mathematical Education
• /
• v.62 no.3
• /
• pp.435-455
• /
• 2023

This study primarily focused on the development of an Explainable Artificial Intelligence (XAI) model to discern and analyze papers with significant impact in the field of mathematics education. To achieve this, meta-information from 29 domestic and international mathematics education journals was utilized to construct a comprehensive academic research network in mathematics education. This academic network was built by integrating five sub-networks: 'paper and its citation network', 'paper and author network', 'paper and journal network', 'co-authorship network', and 'author and affiliation network'. The Random Forest machine learning model was employed to evaluate the impact of individual papers within the mathematics education research network. The SHAP, an XAI model, was used to analyze the reasons behind the AI's assessment of impactful papers. Key features identified for determining impactful papers in the field of mathematics education through the XAI included 'paper network PageRank', 'changes in citations per paper', 'total citations', 'changes in the author's h-index', and 'citations per paper of the journal'. It became evident that papers, authors, and journals play significant roles when evaluating individual papers. When analyzing and comparing domestic and international mathematics education research, variations in these discernment patterns were observed. Notably, the significance of 'co-authorship network PageRank' was emphasized in domestic mathematics education research. The XAI model proposed in this study serves as a tool for determining the impact of papers using AI, providing researchers with strategic direction when writing papers. For instance, expanding the paper network, presenting at academic conferences, and activating the author network through co-authorship were identified as major elements enhancing the impact of a paper. Based on these findings, researchers can have a clear understanding of how their work is perceived and evaluated in academia and identify the key factors influencing these evaluations. This study offers a novel approach to evaluating the impact of mathematics education papers using an explainable AI model, traditionally a process that consumed significant time and resources. This approach not only presents a new paradigm that can be applied to evaluations in various academic fields beyond mathematics education but also is expected to substantially enhance the efficiency and effectiveness of research activities.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.933-948
• /
• 2023

Atmospheric aerosols not only have adverse effects on human health but also exert direct and indirect impacts on the climate system. Consequently, it is imperative to comprehend the characteristics and spatiotemporal distribution of aerosols. Numerous research endeavors have been undertaken to monitor aerosols, predominantly through the retrieval of aerosol optical depth (AOD) via satellite-based observations. Nonetheless, this approach primarily relies on a look-up table-based inversion algorithm, characterized by computationally intensive operations and associated uncertainties. In this study, a novel high-resolution AOD direct retrieval algorithm, leveraging machine learning, was developed using top-of-atmosphere reflectance data derived from the Geostationary Ocean Color Imager-II (GOCI-II), in conjunction with their differences from the past 30-day minimum reflectance, and meteorological variables from numerical models. The Light Gradient Boosting Machine (LGBM) technique was harnessed, and the resultant estimates underwent rigorous validation encompassing random, temporal, and spatial N-fold cross-validation (CV) using ground-based observation data from Aerosol Robotic Network (AERONET) AOD. The three CV results consistently demonstrated robust performance, yielding R²=0.70-0.80, RMSE=0.08-0.09, and within the expected error (EE) of 75.2-85.1%. The Shapley Additive exPlanations(SHAP) analysis confirmed the substantial influence of reflectance-related variables on AOD estimation. A comprehensive examination of the spatiotemporal distribution of AOD in Seoul and Ulsan revealed that the developed LGBM model yielded results that are in close concordance with AERONET AOD over time, thereby confirming its suitability for AOD retrieval at high spatiotemporal resolution (i.e., hourly, 250 m). Furthermore, upon comparing data coverage, it was ascertained that the LGBM model enhanced data retrieval frequency by approximately 8.8% in comparison to the GOCI-II L2 AOD products, ameliorating issues associated with excessive masking over very illuminated surfaces that are often encountered in physics-based AOD retrieval processes.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.523-541
• /
• 2023

As accessibility to 3D printers increases, there is a growing frequency of exposure to chemicals associated with 3D printing. However, research on the toxicity and harmfulness of chemicals generated by 3D printing is insufficient, and the performance of toxicity prediction using in silico techniques is limited due to missing molecular structure data. In this study, quantitative structure-activity relationship (QSAR) model based on data-centric AI approach was developed to predict the toxicity of new 3D printing materials by imputing missing values in molecular descriptors. First, MissForest algorithm was utilized to impute missing values in molecular descriptors of hazardous 3D printing materials. Then, based on four different machine learning models (decision tree, random forest, XGBoost, SVM), a machine learning (ML)-based QSAR model was developed to predict the bioconcentration factor (Log BCF), octanol-air partition coefficient (Log Koa), and partition coefficient (Log P). Furthermore, the reliability of the data-centric QSAR model was validated through the Tree-SHAP (SHapley Additive exPlanations) method, which is one of explainable artificial intelligence (XAI) techniques. The proposed imputation method based on the MissForest enlarged approximately 2.5 times more molecular structure data compared to the existing data. Based on the imputed dataset of molecular descriptor, the developed data-centric QSAR model achieved approximately 73%, 76% and 92% of prediction performance for Log BCF, Log Koa, and Log P, respectively. Lastly, Tree-SHAP analysis demonstrated that the data-centric-based QSAR model achieved high prediction performance for toxicity information by identifying key molecular descriptors highly correlated with toxicity indices. Therefore, the proposed QSAR model based on the data-centric XAI approach can be extended to predict the toxicity of potential pollutants in emerging printing chemicals, chemical process, semiconductor or display process.

• Journal of Korean Academy of Nursing
• /
• v.20 no.2
• /
• pp.153-173
• /
• 1990

One of the important tasks for new parents. especially mothers, is to establish warm, mutually affirming interpersonal relationships with the new baby in the family, with the purpose of promoting the healthy development of the child and the wellbeing of the whole family. Nurses assess the quality of the behavioral characteristics of the maternal-infant interaction. This study examined the relationships between primiparas pereptions of their delivery experience and their maternal infant interaction. It compared to delivery experience of mothers having a normal vaginal delivery with those having a casearean section. The purpose was to explore the relationships between the mother's perceptions of her delivery experience with her maternal infant interaction. The aim was to contribute to the development of theoretical understanding on which to base care toward promoting the quality of maternal-infant interaction. Data were collected directly by the investigator and a trained associate from Dec. 1, 1987 to March 8, 1988. Subjects were 3 random sample of 62 mothers, 32 who had a normal vaginal delivery and 30 who had a non-elective cesarean section (but without other perinatal complications) at three general hospitals in Seoul. Instruments used were the Stainton Parent -infant Interaction Scale(1981) and the Marut and Mercer Perception of Birth Scale(1979). The first observations were made in the delivery room (for vaginally delivered mothers only), followed by day 1, day 2, day 3, and 2 weeks, 4 weeks, 6 weeks and 8 weeks after birth, for a total of 7-8 contacts(Cesarean section mothers were observed on days 4 and 5 but the data not used for analysis). Observations in the hospital were made during the hour prior to scheduled feedings. The infant was placed beside the mother. Later contacts were made at home. Data analysis was done by computer using as SPSS program and indulded X² test, paired t-test, t-test, and Pearson Correlation coefficient ; the results were as follows. 1. Mothers who had a normal vaginal delivery tended to perceive the delivery experience more positively than cesarean section mothers(p＝0.002). The finding supported the hypothesis I that perception of delivery would vary according to the method of delivery. Mothers' perceptions of birth were classified into three dimensions, labor, delivery and the bady. There was a significantly different and positive perception by the vaginally delivered mothers to the delivery experience(p＝0.000) but no differences for labor or the bady according to the delivery method(p＝0.096, p＝0.389), 2. Mothers who had a normal vaginal delivery had higher average maternal-infant interaction scores(p＝0.029) than mothers who had a cesarean section. There were similar higher scores for the 1st day(p＝0.042), 2nd day (p＝0.009), and the 3rd day(p＝0.006) after delivery but not for later times. The findings supported the hypothesis Ⅱ that there would be differences in maternal-infant interaction for mothers having vaginal and cesarean section deliveries. However these differences deccreased section deliveries. However these differences decreased over time . by eight weeks the scores for vaginal delivery mothers averaged 8.1 and for cesarean section mothers, 7.9. 3. The more highly positive the pereption of the delivery experience, the higher the maternal-infant interaction score for all subjects(F＝.3206, p＝.006). The findings supported the hypothesis Ⅲ that there would be correlations between perceptions of delivery and maternal-infant interaction. The maternal infant interaction was highest when the perception of the bady and deliery was positive(r＝.4363, p＝.000, r＝.2881, p＝.012). No correlations between perceptions of labor and maternal-infant interaction were found(p＝0.062). 4. The daily maternal-infant interaction score for the initial contact after birth to 8 weeks postpartum had the lowest average score 5.20 and the highest 7.98(in a range of 0-10). This subjects group of mothers needed nursing intervention to promote their maternal- infant interaction. The daily scores for the maternal-infant over the period of eight weeks. However, there were significantly different increases in maternal-infant interaction only from the first to second day(p＝0.000) and from the fourth to sixth weeks after birth(P＝0.000). 5. When the eight items of maternal-infant interaction were evaluated separately, “Expresses feelings about her role as mother” had the highest average score, 1.64(ina range of 0-3)and “Speaks to baby” the lowest, 0.9. All items, with the possible exception of “Expresses feelings about her role as mother”, suggested the subjects' need of nursing intervention to promote maternal-infant interaction. 6. There were positive correlations between certain general charateristis, namely, both a higher economic status(p＝0.002) and breast feeding(p＝0.202) and maternal - infant interaction. There were positive correlations between a mother's confidence in her role as a mother and the perception of the birth experience(p＝0.004). For mothers who had a cesarean section, a positive perception of the birth experience was related to the duration of her marriage(p＝0.010), a wanted pregnancy (P＝0.030) and her confidence in her role as a mother(p＝0.000). Pereptions of birth for mothers who had a normal vaginal delivery were positive than those for mothers who had a cesarean section. The level of maternalinfant interaction for mothers delivered vaginally was higher than for cesarean section mothers. The relationship between perception of birth and materanalinfant interaction was confirmed. Cesarean section has an impact on the mother's perceived experience of birth which, in turn, is positively related to maternal-infant in turn, is positively related to maternal-infant interaction. Nursing intervention to enhance maternal-infant interaction should begin in prenatal classes with an exploration of the potential impact of cesarean section on the perceptions of the birth experience and continue throughout the perinatal and post-natal periods to promote the mother's ability to control with this crisis experience and to mobilize social support. Nursing should help transform a relatively negatively perceived experience into an accepted, positively perceived and self affirming experience which enhances the maternal-infant relationship.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.6 no.1
• /
• pp.56-64
• /
• 1995

Family is a primary unit of the major socialization processing for children. Parents among the family members are one of the most important figures from whom the child and adolescent acquire a wide variety of behavior patterns, attitudes, values and norms. An organization of family members product family structural functioning. Abnormal family structure is one of the most important reference models in the learning of antisocial patterns of behavior. Therefore incest and child sexual abuse including spouse abuse, elderly abuse, and neglect occurs in the abnormal family structural setting. In particular, incest, a specific form of sexual abuse, was once thought to be a phenomenon of great rarity, but our clinical experiences, especially over the past decade, have made us aware that incest and child sexual abuse is not rare case and on the increasing trend. Therefore, the aim of this study was to determine the family problem and dynamics of incest family, and character pattern of post-incest adolescent victim in Korea. A total of 1,838 adolescents from middle and high school(1,237) and juvenile correctional institute(601) were studied, sampled from Korean student population and adolescent delinquent population confined in juvenile correctional institutes, using proportional stratified random sampling method. The subjects' ages ranged from 12 to 21 years. Data were collected through questionnaire survey. Data analysis was done by IBM PC of Behavior Science Center at the Korea university, using SAS program. Statistical methods employed were Chi-square, principal component analysis and t-test etc. The results of this study were as follows ; 1) Of 1,071 subjects, 40(3.7%) reported incest experiences(sibling incest : 1.6% ; another type of incest : 2.1%) in their family setting. 2) The character pattern of post-incest adolescent victim was more socially maladjusted, immature, impulsive, rigid, anxious and dependent than non-incest adolescent. Also they showed some problem in academic performance and their assertiveness. 3) The other family members of incest family revealed more psychological and behavioral problem such as depression, alcoholism, psychotic disorder and criminal act than the non-incest family, even though there is no evidence of the context between them. 4) The family dynamics of incest family tended to be dysfunctional trend, as compared with non-incest family. It showed that the psychological instability of family member, parental rejection toward their children, coldness and indifference among family member and marital discordance between the parents had significant correlation with incest.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.3
• /
• pp.269-277
• /
• 2010

Previous studies have shown that the most important factor affecting customer loyalty in the service industry is service quality. However, on the subject of whether service quality has a direct or indirect effect on customer loyalty, scholars' views apparently vary. Some studies suggest that service quality has a direct and fundamental influence on customer loyalty (Bai and Liu, 2002). However, others have shown that service quality not only directly affects customer loyalty, it also has an indirect impact on customer loyalty by influencing customer satisfaction and perceived value (Cronin, Brady, and Hult, 2000). Currently, there are few domestic articles that specifically address the relationship between service quality and customer loyalty in the mobile communication industry. Moreover, research has studied customer loyalty as a whole variable, rather than breaking it down further into multiple dimensions. Based on this analysis, this paper summarizes previous study results, establishes an effect mechanism model among service quality, customer satisfaction, and customer loyalty in the mobile communication industry, and presents a statistical test on model assumptions by using customer investigation data from Heilongjiang Mobile Company. It provides theoretical guidance for mobile service management based on the discussion of the hypothesis test results. For data collection, the sample comprised mobile users in Harbin city, and the survey was taken by random sampling. Out of a total of 300 questionnaires, 276 (92.9%) were recovered. After excluding invalid questionnaires, 249 remained, for an effective rate of 82.6 percent for the study. Cronbach's ${\alpha}$ coefficient was adapted to assess the scale reliability, and validity testing was conducted on the questionnaire from three aspects: content validity, construct validity. and convergent validity. The study tested for goodness of fit mainly from the absolute and relative fit indexes. From the hypothesis testing results, overall, four assumptions have not been supported. The ultimate affective relationship of service quality, customer satisfaction, and customer loyalty is demonstrated in Figure 2. On the whole, the service quality of the communication industry not only has a direct positive significant effect on customer loyalty, it also has an indirect positive significant effect on customer loyalty through service quality; the affective mechanism and extent of customer loyalty are different, and are influenced by each dimension of service quality. This study used the questionnaires of existing literature from home and abroad and tested them in empirical research, with all questions adapted to seven-point Likert scales. With the SERVQUAL scale of Parasuraman, Zeithaml, and Berry (1988), or PZB, as a reference point, service quality was divided into five dimensions-tangibility, reliability, responsiveness, assurance, and empathy-and the questions were simplified down to nineteen. The measurement of customer satisfaction was based mainly on Fornell (1992) and Wang and Han (2003), ending up with four questions. Based on the study’s three indicators of price tolerance, first choice, and complaint reaction were used to measure attitudinal loyalty, while repurchase intention, recommendation, and reputation measured behavioral loyalty. The collection and collation of literature data produced a model of the relationship among service quality, customer satisfaction, and customer loyalty in mobile communications, and China Mobile in the city of Harbin in Heilongjiang province was used for conducting an empirical test of the model and obtaining some useful conclusions. First, service quality in mobile communication is formed by the five factors mentioned earlier: tangibility, reliability, responsiveness, assurance, and empathy. On the basis of PZB SERVQUAL, the study designed a measurement scale of service quality for the mobile communications industry, and obtained these five factors through exploratory factor analysis. The factors fit basically with the five elements, indicating the concept of five elements of service quality for the mobile communications industry. Second, service quality in mobile communications has both direct and indirect positive effects on attitudinal loyalty, with the indirect effect being produced through the intermediary variable, customer satisfaction. There are also both direct and indirect positive effects on behavioral loyalty, with the indirect effect produced through two intermediary variables: customer satisfaction and attitudinal loyalty. This shows that better service quality and higher customer satisfaction will activate the attitudinal to service providers more active and show loyalty to service providers much easier. In addition, the effect mechanism of all dimensions of service quality on all dimensions of customer loyalty is different. Third, customer satisfaction plays a significant intermediary role among service quality and attitudinal and behavioral loyalty, indicating that improving service quality can boost customer satisfaction and make it easier for satisfied customers to become loyal customers. Moreover, attitudinal loyalty plays a significant intermediary role between service quality and behavioral loyalty, indicating that only attitudinally and behaviorally loyal customers are truly loyal customers. The research conclusions have some indications for Chinese telecom operators and others to upgrade their service quality. Two limitations to the study are also mentioned. First, all data were collected in the Heilongjiang area, so there might be a common method bias that skews the results. Second, the discussion addresses the relationship between service quality and customer loyalty, setting customer satisfaction as mediator, but does not consider other factors, like customer value and consumer features, This research will be continued in the future.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.123-138
• /
• 2017

Since the stock market is driven by the expectation of traders, studies have been conducted to predict stock price movements through analysis of various sources of text data. In order to predict stock price movements, research has been conducted not only on the relationship between text data and fluctuations in stock prices, but also on the trading stocks based on news articles and social media responses. Studies that predict the movements of stock prices have also applied classification algorithms with constructing term-document matrix in the same way as other text mining approaches. Because the document contains a lot of words, it is better to select words that contribute more for building a term-document matrix. Based on the frequency of words, words that show too little frequency or importance are removed. It also selects words according to their contribution by measuring the degree to which a word contributes to correctly classifying a document. The basic idea of constructing a term-document matrix was to collect all the documents to be analyzed and to select and use the words that have an influence on the classification. In this study, we analyze the documents for each individual item and select the words that are irrelevant for all categories as neutral words. We extract the words around the selected neutral word and use it to generate the term-document matrix. The neutral word itself starts with the idea that the stock movement is less related to the existence of the neutral words, and that the surrounding words of the neutral word are more likely to affect the stock price movements. And apply it to the algorithm that classifies the stock price fluctuations with the generated term-document matrix. In this study, we firstly removed stop words and selected neutral words for each stock. And we used a method to exclude words that are included in news articles for other stocks among the selected words. Through the online news portal, we collected four months of news articles on the top 10 market cap stocks. We split the news articles into 3 month news data as training data and apply the remaining one month news articles to the model to predict the stock price movements of the next day. We used SVM, Boosting and Random Forest for building models and predicting the movements of stock prices. The stock market opened for four months (2016/02/01 ~ 2016/05/31) for a total of 80 days, using the initial 60 days as a training set and the remaining 20 days as a test set. The proposed word - based algorithm in this study showed better classification performance than the word selection method based on sparsity. This study predicted stock price volatility by collecting and analyzing news articles of the top 10 stocks in market cap. We used the term - document matrix based classification model to estimate the stock price fluctuations and compared the performance of the existing sparse - based word extraction method and the suggested method of removing words from the term - document matrix. The suggested method differs from the word extraction method in that it uses not only the news articles for the corresponding stock but also other news items to determine the words to extract. In other words, it removed not only the words that appeared in all the increase and decrease but also the words that appeared common in the news for other stocks. When the prediction accuracy was compared, the suggested method showed higher accuracy. The limitation of this study is that the stock price prediction was set up to classify the rise and fall, and the experiment was conducted only for the top ten stocks. The 10 stocks used in the experiment do not represent the entire stock market. In addition, it is difficult to show the investment performance because stock price fluctuation and profit rate may be different. Therefore, it is necessary to study the research using more stocks and the yield prediction through trading simulation.

• Korean small business review
• /
• v.31 no.4
• /
• pp.67-93
• /
• 2009

The purpose of this paper is to explore the relations between financial constraints and dividend smoothing of innovative small and medium sized enterprises(SMEs) listed on Korea Securities Market and Kosdaq Market of Korea Exchange. The innovative SMEs is defined as the firms with high level of R&D intensity which is measured by (R&D investment/total sales) ratio, according to Chauvin and Hirschey (1993). The R&D investment plays an important role as the innovative driver that can increase the future growth opportunity and profitability of the firms. Therefore, the R&D investment have large, positive, and consistent influences on the market value of the firm. In this point of view, we expect that the innovative SMEs can adjust dividend payment faster than the noninnovative SMEs, on the ground of their future growth opportunity and profitability. And also, we expect that the financial unconstrained firms can adjust dividend payment faster than the financial constrained firms, on the ground of their financing ability of investment funds through the market accessibility. Aivazian et al.(2006) exert that the financial unconstrained firms with the high accessibility to capital market can adjust dividend payment faster than the financial constrained firms. We collect the sample firms among the total SMEs listed on Korea Securities Market and Kosdaq Market of Korea Exchange during the periods from January 1999 to December 2007 from the KIS Value Library database. The total number of firm-year observations of the total sample firms throughout the entire period is 5,544, the number of firm-year observations of the dividend firms is 2,919, and the number of firm-year observations of the non-dividend firms is 2,625. About 53%(or 2,919) of these total 5,544 observations involve firms that make a dividend payment. The dividend firms are divided into two groups according to the R&D intensity, such as the innovative SMEs with larger than median of R&D intensity and the noninnovative SMEs with smaller than median of R&D intensity. The number of firm-year observations of the innovative SMEs is 1,506, and the number of firm-year observations of the noninnovative SMEs is 1,413. Furthermore, the innovative SMEs are divided into two groups according to level of financial constraints, such as the financial unconstrained firms and the financial constrained firms. The number of firm-year observations of the former is 894, and the number of firm-year observations of the latter is 612. Although all available firm-year observations of the dividend firms are collected, deletions are made in the case of financial industries such as banks, securities company, insurance company, and other financial services company, because their capital structure and business style are widely different from the general manufacturing firms. The stock repurchase was involved in dividend payment because Grullon and Michaely (2002) examined the substitution hypothesis between dividends and stock repurchases. However, our data structure is an unbalanced panel data since there is no requirement that the firm-year observations data are all available for each firms during the entire periods from January 1999 to December 2007 from the KIS Value Library database. We firstly estimate the classic Lintner(1956) dividend adjustment model, where the decision to smooth dividend or to adopt a residual dividend policy depends on financial constraints measured by market accessibility. Lintner model indicates that firms maintain stable and long run target payout ratio, and that firms adjust partially the gap between current payout rato and target payout ratio each year. In the Lintner model, dependent variable is the current dividend per share(DPS_t), and independent variables are the past dividend per share(DPS_t-1) and the current earnings per share(EPS_t). We hypothesized that firms adjust partially the gap between the current dividend per share(DPS_t) and the target payout ratio(Ω) each year, when the past dividend per share(DPS_t-1) deviate from the target payout ratio(Ω). We secondly estimate the expansion model that extend the Lintner model by including the determinants suggested by the major theories of dividend, namely, residual dividend theory, dividend signaling theory, agency theory, catering theory, and transactions cost theory. In the expansion model, dependent variable is the current dividend per share(DPS_t), explanatory variables are the past dividend per share(DPS_t-1) and the current earnings per share(EPS_t), and control variables are the current capital expenditure ratio(CEA_t), the current leverage ratio(LEV_t), the current operating return on assets(ROA_t), the current business risk(RISK_t), the current trading volume turnover ratio(TURN_t), and the current dividend premium(DPREM_t). In these control variables, CEA_t, LEV_t, and ROA_t are the determinants suggested by the residual dividend theory and the agency theory, ROA_t and RISK_t are the determinants suggested by the dividend signaling theory, TURN_t is the determinant suggested by the transactions cost theory, and DPREM_t is the determinant suggested by the catering theory. Furthermore, we thirdly estimate the Lintner model and the expansion model by using the panel data of the financial unconstrained firms and the financial constrained firms, that are divided into two groups according to level of financial constraints. We expect that the financial unconstrained firms can adjust dividend payment faster than the financial constrained firms, because the former can finance more easily the investment funds through the market accessibility than the latter. We analyzed descriptive statistics such as mean, standard deviation, and median to delete the outliers from the panel data, conducted one way analysis of variance to check up the industry-specfic effects, and conducted difference test of firms characteristic variables between innovative SMEs and noninnovative SMEs as well as difference test of firms characteristic variables between financial unconstrained firms and financial constrained firms. We also conducted the correlation analysis and the variance inflation factors analysis to detect any multicollinearity among the independent variables. Both of the correlation coefficients and the variance inflation factors are roughly low to the extent that may be ignored the multicollinearity among the independent variables. Furthermore, we estimate both of the Lintner model and the expansion model using the panel regression analysis. We firstly test the time-specific effects and the firm-specific effects may be involved in our panel data through the Lagrange multiplier test that was proposed by Breusch and Pagan(1980), and secondly conduct Hausman test to prove that fixed effect model is fitter with our panel data than the random effect model. The main results of this study can be summarized as follows. The determinants suggested by the major theories of dividend, namely, residual dividend theory, dividend signaling theory, agency theory, catering theory, and transactions cost theory explain significantly the dividend policy of the innovative SMEs. Lintner model indicates that firms maintain stable and long run target payout ratio, and that firms adjust partially the gap between the current payout ratio and the target payout ratio each year. In the core variables of Lintner model, the past dividend per share has more effects to dividend smoothing than the current earnings per share. These results suggest that the innovative SMEs maintain stable and long run dividend policy which sustains the past dividend per share level without corporate special reasons. The main results show that dividend adjustment speed of the innovative SMEs is faster than that of the noninnovative SMEs. This means that the innovative SMEs with high level of R&D intensity can adjust dividend payment faster than the noninnovative SMEs, on the ground of their future growth opportunity and profitability. The other main results show that dividend adjustment speed of the financial unconstrained SMEs is faster than that of the financial constrained SMEs. This means that the financial unconstrained firms with high accessibility to capital market can adjust dividend payment faster than the financial constrained firms, on the ground of their financing ability of investment funds through the market accessibility. Futhermore, the other additional results show that dividend adjustment speed of the innovative SMEs classified by the Small and Medium Business Administration is faster than that of the unclassified SMEs. They are linked with various financial policies and services such as credit guaranteed service, policy fund for SMEs, venture investment fund, insurance program, and so on. In conclusion, the past dividend per share and the current earnings per share suggested by the Lintner model explain mainly dividend adjustment speed of the innovative SMEs, and also the financial constraints explain partially. Therefore, if managers can properly understand of the relations between financial constraints and dividend smoothing of innovative SMEs, they can maintain stable and long run dividend policy of the innovative SMEs through dividend smoothing. These are encouraging results for Korea government, that is, the Small and Medium Business Administration as it has implemented many policies to commit to the innovative SMEs. This paper may have a few limitations because it may be only early study about the relations between financial constraints and dividend smoothing of the innovative SMEs. Specifically, this paper may not adequately capture all of the subtle features of the innovative SMEs and the financial unconstrained SMEs. Therefore, we think that it is necessary to expand sample firms and control variables, and use more elaborate analysis methods in the future studies.