• 대한치과의사협회지
• /
• 제55권8호
• /
• pp.537-540
• /
• 2017

BSSRO (bilateral sagittal split ramus osteotomy) is frequently performed to correct dentofacial deformity and malocclusion. Among its complications the incidence of post-operative facial nerve palsy is very rare, but it is one of the most serious complications. The case of a 21-year-old male patient who underwent facial nerve palsy after BSSRO is described. After surgical intervention and conservative therapy, the patient recovered his facial nerve function successfully.

• Imaging Science in Dentistry
• /
• 제52권2호
• /
• pp.231-238
• /
• 2022

Intraosseous xanthoma of the mandible is a rare benign disorder. A 17-year-old male patient presented with a suspected abscess in the right mandibular third molar, detected on a panoramic radiograph. The patient had no history of systemic or lipid-related metabolic diseases and complained of no specific symptoms or pain. A radiographic examination revealed a heterogeneous radiolucency extending from the apical to the distal aspect of the right mandibular third molar tooth germ. The lesion measured 9 × 16 × 24 mm (antero-posterior × mediolateral × supero-inferior) and showed a relatively well-defined, multilocular, foamy appearance with hyperostotic borders spreading to the inferior alveolar nerve canal. After excisional biopsy, a diagnosis of central xanthoma was made. The lesion recurred, and intraoral vertical ramus osteotomy was done near the lesion. For the treatment of xanthoma of the mandible, extensive and delicate surgical treatment under general anesthesia should be considered.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.524-529
• /
• 2007

Objective: Autologous transfusion is frequently used with orthognathic surgery. The necessity of autologous transfusion has begun to question alone in bilateral sagittal split ramus osteotomy. The aim of this study was to evaluate the availability of autologous transfusion. Methods: The chart reviews of sixty patients who had undergone bilateral sagittal ramus osteotomy were done. The subjects were divided into two groups: In experimental group, 30 patients who autodonated 320ml in the preoperative 3 weeks actually received a transfusion in the postoperative 6 hours were included. In control group, 30 patients who underwent the same operation without preoperative donation and any other transfusion were included. Hemoglobin, hematocrit, and changes of these values in both groups were evaluated. Results: 1. From postoperative 3 hours to postoperative 1 day, the increases of hemoglobin(0.8g/dL in experimental group, 0.2g/dL in control group) and hematocrit(0.3% in experimental group, 0.6% in control group) were not statistically significant between both groups. 2. From postoperative 1 day to postoperative 1 week, the increase of hemoglobin(0.6g/dL in experimental group, 0.3g/dL in control group) was not statistically significant between both groups. But the increase of hematocrit(2.5% in experimental group, 1.0% in control group) was statistically significant between both groups over the same period(hematocrit p=0.043). 3. On postoperative 1 week, the values of hemoglobin(12.3% in both groups) and hematocrit(35.6% in experimental group, 36.8% in control group) were not statistically significant between both groups. Conclusion: The autologous transfusion in surgery of just a little blood loss was not effective. The most results show that there is little availability of autologous transfusion according to changes of hemoglobin and hematocrit in bilateral sagittal split ramus osteotomy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권1호
• /
• pp.100-107
• /
• 2008

First of all a good surgical access is considered among various approach methods to the cystic lesion. A poor surgical access can lead to a failure of the whole treatment. A sagittal split ramus osteotomy (SSRO) on the large cyst occurring in the mandibular ramus lets us not only reduce operation time, but can additionally contribute to a good visual field. In addition, a merit exists that it lets this operating method provide soft tissue adhesion for proximal and distal segment and decrease post operative necrosis. We experienced three cases of a large cyst on the mandibular angle and ramus. By employing a sagittal splitting of the mandible, it provided good surgical access and operation results without recurrence during a follow-up period. The surgical technique described may be helpful in treating similar large cysts.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권4호
• /
• pp.351-358
• /
• 2010

A 31-year-old woman with hemifacial microsomia presented to the Department of Oral and Maxillofacial Surgery, Seoul National University Dental Hospital. The patient was previously treated with distraction osteogenesis device to elongate right maxilla and mandibular ramus. But, the result was not satisfactory, to correct residual facial asymmetry due to hemifacial microsomia we planned costochondral graft for reconstruction of ramus and condyle, Le Fort I osteotomy and sagittal split ramus osteotomy for facial asymmetry. The right mandibular condyle and ramus was reconstructed with right eleventh costochondral graft via submandibular approach. Using costochondral graft and orthognathic surgery the facial asymmetry in hemifacial microsomia patient was corrected. 1-stage treatment consists of costochondral graft and orthognathic surgery can achieve function and esthetics at the same time, is timesaving to both patient and surgeon.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권2호
• /
• pp.191-198
• /
• 1991

안모비대칭은 심미적 정서적으로 영향을 줄 뿐만 아니라 기능적인 장애를 초래하는 경우도 있다. 안모비대칭은 안면골 중에서 특히 하악골과 관련된 경우가 많은데 이는 하악골이 안면하부의 연조직을 지지하므로 작은 위치, 형태 변화에도 두드러지게 나타나기 때문이다. 비대칭안모를 초래하는 하악과두의 거대증은 Hyperplasia, Hypertrophy, 골증, 외골증, 골연골증, 연골육종 등을 들 수 있다. 비대칭안모 분류는 여러 학자에 의해 다양하게 분류되지만 Bruce와 Hayward는 Deviation prognathism, Unilateral macroganthia, Unilateral condylar hyperpiasia로 분류한 바 있다. 과증식된 하악과두의 절제술은 1856년 Humphry에 의해 최초로 시행된 후 여러 학자들에 의해 성공적으로 시행되고 있다. 본 증례에서는 Unilateral condylar hyperlpasia와 골연골종으로 인한 안모비대칭 환자로써 Condylectomy, Le Fort I osteotomy, Vertical ramus osteotomy, Mandibular inferior border ostectomy, Genioplasty 등을 시행하여 심미적 기능적으로 양호한 결과를 얻었기에 이를 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권4호
• /
• pp.319-322
• /
• 2011

Purpose: The purpose of this study was to examine the appropriate degree of set-back of the mandible by evaluating the rate of relapse after surgery. Methods: Among the patients who visited our hospital from January 2002 to January 2007 and who underwent orthognathic surgery, of the patients available for follow-up observation, the rate of relapse after surgery was investigated according to the set-back degree. The patients were divided into groups by the degree of set-back, and relapse was evaluated by the radiographs performed the day after surgery, 6 months after surgery, 1 year after surgery, 2 years after surgery and 3 years after surgery. Results: In cases that exceeded the limit of posterior movement of the mandible (13 mm) or that had the wrong position of the condyle, a greater tendency toward relapse was shown. Conclusion: Based on the results of this study, among the cases that required a large amount of posterior movement of the mandible, two jaw surgeries accompanied by bilateral sagittal split ramus osteotomy (BSSRO) and LeFort I osteotomy are recommended.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권5호
• /
• pp.271-275
• /
• 2012

Objectives: This study evaluated a range of fixation methods to determine which is best for the postoperative stabilization of a mandibular osteotomy using three-dimensional finite element analysis of the stress distribution on the plate, screw and surrounding bone and displacement of the lower incisors. Materials and Methods: The model was generated using the synthetic skull scan data, and the surface model was changed to a solid model using software. Bilateral sagittal split ramus osteotomy was performed using the program, and 8 different types of fixation methods were evaluated. A vertical load of 10 N was applied to the occlusal surface of the first molar. Results: In the case of bicortical screws, von-Mises stress on the screws and screw hole and deflection of the lower central incisor were minimal in type 2 (inverted L pattern with 3 bicortical repositioning screws). In the case of plates, von-Mises stress was minimal in type 8 (fixation 5 mm above the inferior border of the mandible with 1 metal plate and 4 monocortical screws), and deflection of the lower central incisor was minimal in types 6 (fixation 5 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws) and 7 (fixation 12 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws). Conclusion: Types 2 and 6 fixation methods provide better stability than the others.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권1_2호
• /
• pp.65-76
• /
• 1992

This study was designed to observe the adaptive changes of mandibular condyles to displacement of mandibular condyle in adult animals. In this study, 16 rabbits weighting about 3.5 kg was selected. Four rabbits were preserved for control group and 8 animals were divided into 3 groups, 2 weeks, 4 weeks and 8 weeks. The experimental animals were performed oblique osteotomy on both mandibular ramus and internal wiring at mandibular border. The experimental animals were sacrificed consecutively on the 2 weeks, 4 weeks and 8 weeks after oblique osteotomy and mandibular condyles were dissected out carefully to produced tissue specimen. The specimens were fixed with 10% N formaline solution for 24 hours and rinsed with phosphate buffer solution. It was decalcified with 5% nitric acid for 15 days. Thereafter the specimens were dehydrated in alcohol series and embedded paraffin as usual manner. The mebedded specimen were sectioned in $4-6{\mu}m$ microtome, stained with hematoxylin-eosin and azan stain and observed through light microscope. The following results were observed from this experiment. When there was postional change of condyle head after mandibular ramus oblique osteotomy in adult rabbit, 1. The density of chondrocyte was generally increased at condylar cartilage and the thickness of condylar cartilage was increased posterosuperior aspect of the mandibular condyle slightly. 2. The density of chondrocyte was increased at proliferative zone so fibrous articular zone, porliferative zone and hypertrophic zone was clearly distinguished. 3. Active endochondral bone formation was occurred at mandibular condyle.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.77-82
• /
• 2017

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance ($162.72{\pm}42.55N$), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.