• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.628-631
• /
• 2007

One of the structural measures for the peak flow reduction is infiltration facilities. There are many types in infiltration facilities - infiltration basin, trench, bed, porous pavement, percolated subdrain, dry well. In this study runoff reduction effect of infiltration trench is analyzed by WinSLAMM. Runoff reduction effect is investigated by each design rainfall and temporal pattern of rainfall particularly. The biggest reduction is shown in Yen and Chow's temporal pattern of design rainfall and the smallest reduction is shown in Huff's first quartile pattern. Runoff reduction rate is presented about 6 to 14 percentage, and the larger return period, the smaller runoff reduction rate.

• 산업기술연구
• /
• 제27권B호
• /
• pp.193-199
• /
• 2007

This paper is a result of a case study about landslides at Whacheon area in Kangwondo occurred during heavy rainfall in 2006. A-day-accumulative rainfalls from July 12 to July 13 and July 15 to July 16 were 120mm and 110mm respectively. Five sites at which slope failures occurred were visited to figure out main causes of slope failures by investigating characteristics of rainfall, geological formation, topography and ground surface exploration around the boundary of the landslides. Based on the site investigation characteristics of landslide with respect to rainfall pattern, geological and topographical condition and pattern of landslide were evaluated.

• 한국수자원학회논문집
• /
• 제49권1호
• /
• pp.41-49
• /
• 2016

본 연구에서는 일강수량의 누적 패턴을 고려하여 새로운 가뭄지수(RADI)를 개발하였다. RADI는 누적 강수량의 장기간의 평균과 특정 기간에 관측된 누적 강수량을 비교하여 일단위로 가뭄지수를 간단히 산정할 수 있도록 개발되었다. 우리나라의 대표적인 가뭄기간 동안의 RADI의 시 공간적 변동성과 재현 주기를 살펴봄으로써 장 단기 가뭄의 감시에 대한 RADI의 적용성을 평가하였다. SPI의 경우, 장 단기 가뭄을 표현하기 위해서는 여러 가지 지속기간을 가지는 SPI를 사용해야 하지만, RADI는 하나의 지수로 단기 및 장기가뭄을 표현하고 모니터링 할 수 있다. RADI의 전국 평균값을 살펴본 결과, 우리나라에서 20년 주기로 가뭄이 발생하고 있다는 사실을 확인하였다. 또한 RADI의 발생확률 및 통계 분석을 통해 5단계의 가뭄 등급을 제안하였으며, 이는 가뭄 예보와 대응을 위한 기준으로 활용될 수 있을 것으로 판단된다.

• 한국수자원학회논문집
• /
• 제37권9호
• /
• pp.695-706
• /
• 2004

본 연구는 실측자료가 확보된 중규모 하천유역에서 최대 첨두유량을 발생시키는 설계강우의 시간분포모형을 밝혀내고, 결정된 시간분포모형을 바탕으로 하여 유역특성과 임계지속기간의 관계를 규명하는 것이다. 50-5,000$\textrm{km}^2$의 44개 유역을 통하여 수문분석을 실시하였으며, SCS 유효우량 산정방법으로 결정된 유효우량을 사용하여 최대 첨두유량을 발생시키는 시간분포모형은 Huff의 4분위 시간분포모형으로 나타났다. 유역면적 50-600$\textrm{km}^2$인 유역에서는 24시간 강우지속기간의 첨두유량과 임계지속기간의 첨두유량은 유사한 값을 보이며, 유역면적 600-5,000$\textrm{km}^2$인 유역에서는 48시간 강우지속기간의 첨두유량과 임계지속기간의 첨두유량이 유사한 값을 보였다. AMC III 조건의 유효우량에 대하여 높은 상관성을 지니는 유역면적과 임계지속기간의 관계식을 유도하였으며, 유역면적 50-5,000$\textrm{km}^2$이 중규모 하천유역에서 임계지속기간을 결정하는데 유용한 식으로 이용될 수 있을 것으로 판단된다. 또한, 단위도 특성치를 이용한 무차원 회귀식을 유도하였다.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1027-1035
• /
• 2013

사면안정 해석 시, 사면파괴의 주원인인 강우사상의 현실적 접목을 위하여 본 연구에서는 다음 두 가지 방법을 채택하였다. 하나는 시간에 따른 강우량 변화의 영향을 무시한 기존의 설계강우 방식인 I.D.F(Intensity-Duration-Frequency)곡선을 이용하는 방법이며, 다른 하나는 시간의 영향을 고려하여 강우사상을 표현한 Huff 방법이다. 먼저 I.D.F 방법의 강우사상을 적용하여 선행강우효과를 나타내는 초기흡수력의 변화에 따른 사면의 안전율의 변화를 알아보았다. 또한, 두 강우사상의 방식을 적용하여 강우사상이 사면의 안전율 변화에 미치는 영향을 규명하고자 하였다. 그 결과, Huff 방법의 강우사상이 I.D.F 방법보다 더 현실적으로 사면의 안전성 평가가 이루어 질 수 있음을 확인할 수 있었다.

• 한국습지학회지
• /
• 제4권2호
• /
• pp.43-56
• /
• 2002

About 12 rain gauge stations of Korea, annual maximum rainfall series of before and after 1980 whose durations are 1, 2, 3, 6, 12, 24, 48, 72 hours respectively were composed and statistical characteristics of those time series were calculated and probability rainfall were estimated by L-moment frequency analysis method and compared each other in order to investigate the recent quantitative rainfall variations. And also, distribution curves of each statistical variations for each duration were constructed by using Kigging method to look into spacial rainfall variation aspects. As a result, We could confirm recent rainfall increase in the South Korea. And spatial increase pattern of standard deviation and frequency rainfall appeared analogously each other. 1n the cases of comparatively short rainfall duration, we could see relatively low increase or decrease tendency in Chungchong Province, Cholla-bukdo, Cholla-namdo eastern part, Kyongsang-namdo western part area. While, variations happened great1y in seaside district of east coast, southwest seashore, Inchon area etc. In the cases of longer durations relatively low increase was showed in southern seashore such as Yeosoo area and as distance recedes from this area, showed gradually augmented tendency. The aspect of mean looks similar tendency of above except that the variation rate of almost seaside district are big in the case of shorter durations. In addition, rainfall increases of short durations which became the center of hydrologist and meteorologist are unconfirmed in this study.

• 물과 미래
• /
• 제14권4호
• /
• pp.13-18
• /
• 1981

강우량의 시간분포 특성에 관한 강우상태 분석은 소유역의 계획홍수량을 결정한다거나 도시지역의 배수망 설계를 위한 설계유량 산정을 위하여 대단히 중요하다. 서울 지역의 과거 기록치로부터 총강우량이 20mm 이상 되는 약 400개의 호우자료를 이용하여 5분간격 강우의 시간분포를 해석하였다. 총강우량에 대한 백분율을 총강우시간에 대한 백분율과 연관시키고 획득된 자료를 강우 최대치가 발생되는 위치 따라 4개의 그룹으로 분류 분석하여 그 결과를 제시하였다. 또한 강우와 강우간의 변화성을 정량적으로 나타내기 위하여 시간분포 특성을 빈도 확률에 따라 분석하였다. 분석결과로 얻어진 강우의 시간분포 관계는 설계유량 수문곡선 결정에 사용되는 설계강우의 우량주상도를 얻는데 사용될 뿐만 아니라 주어진 유역에서의 강우형상을 파악하는데 적용될 수 있다. 또한 수문해석 문제를 위한 강우의 모델을 형성할 수 있으며 공간적 분포 이외의 강우특성 및 매개변수 등과 같은 자료와 연관시킬 수 있다. 분석결과 제2구간 강우의 빈도가 가장 높았으며 제4구간 강우의 빈도가 가장 낮았다. 이와 같은 분석 결과인 시간분포의 특성을 누가 강우시간 백분율과 누가 강우량 백분율의 항으로써 확률별로 표시하였으며 각 구간별 강우의 시간분포 양상 및 그에 따른 우량주상도를 도표화하였다.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.637-643
• /
• 2004

A new method of automatic recording raingauge is developed to measure rainfall with 0.01mm resolution. This use two different signals to measure rainfall more accurately compare than other raingauges. One is weight of the tipping bucket with rainfall amount and the other is pulse from tipping bucket reverse. New method applied 1 mm tipping bucket mechanism and install loadcell under tipping bucket mechanism for measuring rainfall weight. Loadcell measure weight of rainfall until 1 mm with 0.01 mm resolution and more than 1 mm than bucket reverse and pulse signal generate, after that loadcell measure weight again. The validation of new instrument was examined in the room 65 mm/hour rainfall rate total 53 mm range. There is below than 1 % error of absolute rainfall amount and 0.01 mm resolution. The field test of instrument was carried out by comparing its measured values with values recorded by weight type and standard type on June 1 2003 at Terrestrial Environmental Research Center at Tsukuba University in Tsukuba of Japan, when it has recorded total amount of 40.58 mm rainfall by standard raingauge and new raingauge recorded 41.032 mm. Same rainfall intensity pattern observed in field observation with weight type raingauge. Rainfall intensity between weight type and Lee-A type raingauge reached 0.9947 correlation in 3 minute average.

• 상하수도학회지
• /
• 제36권4호
• /
• pp.229-237
• /
• 2022

The sewer capacity design have been based on the Huff model or the rational equation in South Korea and often failed to determine optimal capacity, resulting in frequent urban flooding or over-sizing. A time distribution of rainfall (i.e., Huff or ABM method) could be used instead of a rainfall hyetograph obtained from statistical analysis of previous rainfalls. In this study, the Huff method and the ABM method, which predict the time distribution of rain intensity, which are widely used to calculate sewage pipe drainage capacity using the SWMM, were compared with the standard rainfall intensity hyetograph of Seoul. If the rainfall duration was 30 minutes to 180 minutes, the rainfall intensity value calculated by the Huff model tended to be less than the rainfall intensity value of the standard rainfall intensity in the initial 5-10 minutes. As a result, more than 10% to 30% of under-design would be made. In addition, the rainfall intensity value calculated by the Huff model from the section excluding the initial 5-10 minutes of rainfall to the rainfall duration was calculated larger than the value using the standard rainfall intensity equation, which would result in an over-design of 10% to 30%. In the case of a relatively long rainfall duration of 360 minutes (6 hours) to 1,440 minutes (24 hours), it showed an lower rainfall intensity of 60 to 90% in the early stages of rainfall, but the problem of under-design had been solved as the rainfall duration time had elapsed. On the other hand, in the alternating block method (ABM) method, it was found that the rainfall intensity at the entire period at each assumed rainfall duration accurately matched the standard rainfall intensity hyetograph of Seoul.

• 한국농공학회지
• /
• 제35권3호
• /
• pp.47-62
• /
• 1993

The laboratorv model test was carried out to investigate the behavior of pore water pressure, the critical amount of rainfall for slope failure, the pattern of failure, and the variation of seepage line at the slope with the uniform material of embankment by changing the slope angles and rainfall intensities. The results were was summarised as follows : 1.At the beginning stage of rainfall, the negative pore pressure appeared at the surface of slope and the positive pore pressure at the deep parts. But, the negative one turned into the positive one as the rainfall continued and this rapidly increased about 50 to 100 minutes before the slope failure. 2.The heavier the rainfall intensity, the shorter the time, and the milder the slope, the longer the time took to reach the failure of slope. 3.As the angle of the slope became milder, the critical amount of rainfall for slope failure became greater. 4.Maximum pore water pressure was 10 to 40g/cm$^2$ at the toe of slope and 50 to 90g/cm$^2$at the deep parts. 5.In the respect of the pattern of slope failure, surface failure of slope occurred locally at the toe of slope at the A-soil and failure of slope by surface flow occurred gradually at the top part of slope at the B-soil. 6.As the rainfall continued and the saturation zone in the embankment was formed, the seepage line went rapidly up and also the time to reach the total collapse of slope took longer at the B-soil. 7.As the position of the seepage line went up and the strength parameter accordingly down, the safety factor was 2.108 at the A-soil and 2.150 at the B-soil when the slope occured toe failure. Minimum safety factor was rapidly down to 0.831 at the A-soil and to 0.936 at the B-soil when the slope collapsed totally at the top part of slope.