• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.643-646
• /
• 2006

An operational calibration is applied to improve radar rainfall intensity using rainfall obtained from rain gauge. The method is applied under the assumption of the temporal continuity of rainfall, the rainfall intensity from rain gauge is linearly related to that from radar. The method is applied to the cases of typhoon and rain band using the reflectivity of CAPPI at 1.5km obtained from Jindo radar. The CAPPI is obtained by bilinear interpolation. For the two cases, the rainfall intensities obtained by operational calibration are very consistent with the ones by the rain gauges. The present study shows that the correlation between the rainfall intensity by operational calibration and rain gauges is better than the one between the rainfall intensity by M-P relationship and rain gauges. The correlation coefficients between the total rainfall intensity obtained by operational calibration and rain gauges in typhoon and rain band cases are 0.99 and 0.97, respectively. Areal rainfalls are estimated using the field of calibration factor interpolated by Barnes objective analysis. The method applied here shows an improvement in the areal rainfall estimation. For the cases of typhoon and rain band, the correlation between the areal rainfall by operational calibration and rain gauges is better than the one between the area rainfall by M-P relationship and rain gauges. The correlation coefficients between the areal rainfall obtained by operational calibration and rain gauges in typhoon and rain band cases are 0.97 and 0.84, respectively. The present study suggests that the operational calibration is very useful for the real-time estimation of rainfall intensity and areal rainfall.

• 한국대기환경학회지
• /
• 제15권1호
• /
• pp.1-11
• /
• 1999

In this work, a theoretical model has been formulated which allows the study of the scavenging efficiencies of aerosol particles by the rain drops. Aerosol particles are scavenged by the simultaneous brownian diffusion, interception and inertial impaction force. In addition the calculations based on the collision efficiency model are carried out for the collision of aerosol particles with diameter range 0.01~30 $mu extrm{m}$ and rain drops with diameter 0.02$\times$$2^{n/3}$(n=1, 2, …, 17)cm. The results indicate that: (1) the below-cloud scavenging affects mainly the coarse particles (＞3 ${\mu}{\textrm}{m}$), the fine particles remaining almost unchanged; (2) the scavenging efficiencies by below-cloud in the heavy rain (rain intensity, 10 mm/hr) surpass the efficiency found in the drizzle rain (rain intensity, 1 mm/hr).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2507-2509
• /
• 2005

Because the rain gauges of tipping bucket type can easily use the digital signal, the rain gauges are widely used for the meteorological observation. In general, the resolution of rain gauges of tipping bucket type can be categorized by the 0.1mm, 0.5mm, and 1.0mm classes. But, the error of the tipping bucket rain gauges is made by the intensity of rainfalls and is expected to make the standard calibration method for error measurement. Thus, we developed the hardware of standard calibration facility for rain gauges by weighting measurement method and proposed the standard procedure by rainfall intensity in this study. Also, we calculated the error for the rainfall intensity and obtained useful result through the proposed calibration method.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.229-237
• /
• 2011

Today they use a weather radar with spatially high resolution in predicting rainfall intensity and utilizing the information for super short-range forecast in order to make predictions of such severe meteorological phenomena as heavy rainfall and snow. For a weather radar, they use the Z-R relation between the reflectivity factor(Z) and rainfall intensity(R) by rainfall particles in the atmosphere in order to estimate intensity. Most used among the various Z-R relation is $Z=200R^{1.6}$ applied to stratiform rain. It's also used to estimate basic rainfall intensity of a weather radar run by the weather center. This study set out to compare rainfall intensity between the reflectivity of a weather radar and the ground rainfall of ASOS(Automatic Surface Observation System) by analyzing many different cases of heavy rain, analyze the errors of different weather radars and identify their problems, and investigate their applicability to nowcasting in case of severe weather.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2468-2473
• /
• 2005

Because the rain gauges of tipping bucket type can easily use the digital signal, the rain gauges are widely used for the meteorological observation. In general, the resolution of rain gauges of tipping bucket type can be categorized by the 0.1mm, 0.5mm, and 1.0mm classes. But, the error of the tipping bucket rain gauges is made by the intensity of rainfalls and is expected to make the standard calibration method for error measurement. Thus, we developed the hardware of standard calibration facility for rain gauges by weighting measurement method and proposed the standard procedure by rainfall intensity in this study Also, we calculated the error for the rainfall intensity and obtained useful result through the proposed calibration method.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.818-823
• /
• 2006

Because the rain gauges of tipping bucket type can easily use the digital signal, the rain gauges are widely used for the meteorological observation. In general, the resolution of rain gauges of tipping bucket type can be categorized by the 0.1mm, 0.5mm, and 1.0mm classes. But, the error of the tipping bucket rain gauges is made by the intensity of rainfalls and is expected to make the standard calibration method for error measurement. Thus, we developed the hardware of standard calibration facility for rain gauges by weighting measurement method and proposed the standard procedure by rainfall intensity in this study Also, we calculated the uncertainty for the rainfall intensity and obtained useful result through the proposed calibration method.

• 한국지구과학회지
• /
• 제33권7호
• /
• pp.569-582
• /
• 2012

2011년 7월 26일 서울은 장마에 동반된 기록적인 대류성 집중호우로 인해 약 2천5백억 원 이상의 재산피해와 57명(사망자)의 인명손실이 발생되었고, 2012년 8월 27일 15호 태풍 볼라벤에 동반된 집중호우로 광주광역시에는 보다 약한 집중호우와 강풍을 동반하여 피해는 상대적으로 적게 발생시켰다. 위의 사례에 대해 KLAPS(기상청 국지분석 및 예측시스템)을 사용하여 집중호우 시 다른 물리적 요소들에 의한 중규모 과정들의 조사 및 분석을 수행하였다. 이것은 레이더관측과 천리안 위성관측 자료로부터 강우강도를 도출하는데 호조건의 전형적인 중규모 시스템이기 때문에 선택되었으며, 두 사례는 모두 집중호우 발생에 좋은 환경임을 보였다. 2011년 장마에 동반되어 서울에 나타난 사례에서 레이더와 천리안의 정량적인 강우강도를 지상강우계 관측과 비교했을 때, 최대 관측값이 85 mm/hr 이상이 나타난 시점에 비해 약 50 mm/hr 이상이 과소 추정되는 차이가 나타났으나, 레이더 강우강도는 35 mm/hr의 차이와 천리안 강우강도는 60 mm/hr의 차이를 보였다. 그러나 2012년 8월 27일 15호 태풍 볼라벤에 동반되어 광주광역시에 나타난 강우강도와 지상강우강도의 경향은 위의 사례와 유사하게 나타났으며, 정량적인 강우강도 차이는 최대 관측값이 17 mm/hr 이상이 나타난 시점에 비해 약 10 mm/hr 이상이 과소 추정되는 차이가 나타났으나, 레이더 강우강도는 5 mm/hr의 차이와 천리안 강우강도는 10 mm/hr의 차이를 보였다. 이것은 태풍 볼라벤에 의한 집중호우가 상대적으로 약했기 때문이었다. 두 사례에 대해 레이더 강우강도와 천리안 강우강도는 지상강우강도와 시계열적으로 비교했을 때, 모두 유사한 경향을 보였다.

• Wind and Structures
• /
• 제29권4호
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• 대기
• /
• 제21권4호
• /
• pp.481-495
• /
• 2011

This study is performed to consider the threshold values of heavy rain warning in Korea using 98 surface meteorological station data and 590 Automatic Weather System stations (AWSs), damage data of National Emergency Management Agency for the period of 2005 to 2009. It is in need to arrange new criteria for heavy rain considering concept of rainfall intensity and rainfall damage to reflect the changed characteristics of rainfall according to the climate change. Rainfall values from the most frequent rainfall damage are at 30 mm/1 hr, 60 mm/3 hr, 70 mm/6 hr, and 110 mm/12 hr, respectively. The cumulative probability of damage occurrences of one in two due to heavy rain shows up at 20 mm/1 hr, 50 mm/3 hr, 80 mm/6 hr, and 110 mm/12 hr, respectively. When the relationship between threshold values of heavy rain warning and the possibility of rainfall damage is investigated, rainfall values for high connectivity between heavy rain warning criteria and the possibility of rainfall damage appear at 30 mm/1 hr, 50 mm/3 hr, 80 mm/6 hr, and 100 m/12 hr, respectively. It is proper to adopt the daily maximum precipitation intensity of 6 and 12 hours, because 6 hours rainfall might be include the concept of rainfall intensity for very-short-term and short-term unexpectedly happened rainfall and 12 hours rainfall could maintain the connectivity of the previous heavy rain warning system and represent long-term continuously happened rainfall. The optimum combinations of criteria for heavy rain warning of 6 and 12 hours are 80 mm/6 hr or 100 mm/12 hr, and 70 mm/6 hr or 110 mm/12 hr.

• 한국지구과학회지
• /
• 제33권2호
• /
• pp.113-125
• /
• 2012

열대강우관측(TRMM) 위성에 탑재된 두 독립적인 기기인 마이크로파 센서(TMI)와 강수레이더(PR)를 통해 추정된 지표에서의 강우강도와 강수 관련 변수들을 네 개의 주요 열대해양에서 비교하였다. 해수면의 온도가 가장 높은 서태평양에서 가장 많은 강수구름이 발생하며, 이는 동태평양과 대서양 보다 1.5배 많은 빈도수이다. 반면 대류형과 혼합형에서 동태평양이 가장 강한 강우강도를 나타냈으며, 전체 강수 화소에 대해서는 대서양이 가장 강한 강우강도를 보였다. 한편 PR의 강우강도를 참값으로 볼 때 TMI의 강우강도의 편향은 강수유형과 지역에 따라 그 크기가 매우 다르게 나타났다. 더욱이 강수유형별 편향은 서로 다른 부호를 보였다. 특히 이 연구에서 선정한 열대해양들은 비교적 유사한 지구물리적 환경을 가지고 있지만, 그 편향의 크기가 지역에 따라 2배 이상의 차이가 일어났다. 따라서 마이크로파로부터 추정된 강수량에 대한 검증은 강수유형별 및 지역적으로 수행되어야 하며, 또한 국지적 강수 특성을 고려한 보다 정교한 TMI 알고리즘의 개발 및 개선이 필요함을 의미한다.