• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1390-1394
• /
• 2009

In the paper We have analyzed the case study of the domestic and foreign railway logistic information systems based on the railway logistic to build the information architect basis system of real-time simultaneous. In case of domestic examples, We have analyzed the logistic information system used in Korea Railroad and the information systems of Kyungin ICD(Inland Container Depot) and Busanjin CY(Container Yard). In case of foreign example, we have analyzed the logistic information system of Japanese FRENS(Freight information network system) and the examples of freight tracking using RFID(Radio Frequency Identification). Through the above analysis, We have induced the main problems and improvement methods. We are able to build the railway-oriented information network system for the massive and efficient railway transportation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.715-720
• /
• 2002

The dynamic load effects, generated by moving trains, are transferred to the railway bridges through tracks. The dynamic load effects may vary due to the dynamic characteristics of the applied vehicle loads and the railway bridges including the track system. However, the track models have been neglected or simplified by spring elements in the most studies since it is quite complicated to consider the track systems in the dynamic analysis models of railway bridges. In this study track system on railway bridges are modeled using a three-dimensional discrete-support model that can simulate the load carrying behavior of tracks. A 40m simply supported prestressed concrete box-girder system adopted for high-speed railway bridges are modeled for simulation works. The train models are composed of 20 cars for KTX. The dynamic response of railway bridges are found to be affected depending on whether the track model is considered for not. The influencing rate depends on the traveling speed and different wheel-axle distance. The dynamic bridge response decreases remarkably by the track systems around the resonant frequency. Therefore, the resonance effect can be reduced by modifying the track properties in the railway bridge, especially for KTX trains.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.51-60
• /
• 2013

As the human demand or desire on brand new systems otherwise equipped with new functions grows drastically, so does the complexity of the systems. With this trend, the systems are becoming bigger in scale and at the same time the safety requirements are more stringent in the development. Typical systems examples in such a situation may include high-speed railway systems, aero and space systems, marine systems, etc. Failure of those systems can cause serious damages on both the human being and wealth with social infrastructure. As such, it is quite necessary to ensure that the safety requirements be satisfied in the system development. To achieve this need, there could be a lot of solutions to take. In this paper, regarding safety, a special attention is given to the verification phase process, which is one of the intermediate phases of whole systems development process. More specifically, the ultimate concern is placed on how to carry out the design verification while ensuring the safety requirements. To do so, some improvements in the verification phase were proposed first. Then, the outcomes were combined with the systems safety process by generating an integrated process model to reach the goal. As a case study, application to a railway system was discussed, where strict safety requirements are usually necessary. It would be expected that the potential likelihood of failure with rail systems could be reduced if the results obtained are used effectively with some enhancement from further study.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.731-740
• /
• 2008

A railway control system is one of the typical safety-critical systems. It is required to use formal methods for the requirements specification and verification in order to develop the global-standard railway control systems based on the computer systems. In this paper, we develop a guideline for requirements specification using formal methods, and present a case study of the development of a computer-based railway control system through the application of the proposed guideline. We use the Statechart and the Z method for the formal requirements specifications and verify the consistency and completeness of the formal specifications of the requirements.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.968-973
• /
• 2007

The systems such as the railway control system, satellite control system and nuclear power plant control system are the safety critical systems because the failure of them could lead to risk significant events. These softwares of digital systems must follow the life cycle process from the beginning of software development to guarantee their safety and reliability. The NRC(Nuclear Regulatory Commission) Reg Guide of nuclear fields, the RTCA/DO-178B standard which is used to acquire the certification for software in industrial aero field in European Union and United State, the DEF STAN 00-55 standard for the safety of electronic weapon in England, the IEC 601-1-4 for medical equipment and the IEC 62279 for railway system recommended the development life cycle. This paper introduces the development process and compares each other. Also it indicates applicable development criteria for the software of systems related to railway fields and describes the detailed procedure of development criteria. We describe the procedure to make the software development criteria in nuclear filed. For the software development related to railways, the process from plan phase to maintenance phase must be satisfied. The safety and reliability is guaranteed through these standards.

• Journal of Korean Port Research
• /
• v.8 no.1
• /
• pp.49-63
• /
• 1994

The introduction of high speed railway system a significant impact on the conventional inter-urban transport systems by inducing a significant traffic from the existing modes as well as generating a new traffic. It is also closely related to intra-urban transport systems as the inter-urban traffic has its origin and destination in a city. In the context of mode choice, for high speed transport systems, it has been argued that the accessibility is the most important attribute conceived by users. Thus this study attempts to analysis the importance of the accessibility for the planned high speed railway systems particularly with respect to the location of Busan Station. For this Stated-Preference approach, which is considered appropriate for such study, is adopted, and disaggregate binary logit models for mode choice between the high speed railway and air service in Busan-Seoul corridor are developed. The elasticities for cost and service variables are also derived. The results disclose that cost is the most important which is inconsistent with most previous studies ; accessibility has considerable impact on the choice ; and frequency however has a little impacts. Concerning location of the high speed railway station the results suggest that the longer the access distance is, the more important the accessibility is. This implies that the connection of reliable access transport services such as underground are essential between the terminal and urban center.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.57-69
• /
• 2011

Reliability means that a product maintains its initial quality and performance at certain period of time(time, distance, cycle etc) under given condition without failure. Given conditions include both environmental condition and operating condition. Environmental condition means common natural environment such as temperature, humidity, vibration, and working condition means artificial environment such as voltage, current load, install place, hours of use, which occurs during using the product. In the field of railway vehicles, although components of railway vehicles with reliability are the trend of mandatory as persisting period of railway vehicles is extended, using components of railway vehicles is insufficient for the practical reliability assessment. but the meaning of the first railway operating agency to acquire the parts in the field, the data suggest the reliability of products if you can and can show the reliability of modular units and modular units can provide the reliability of if you can present reliability of the entire system is thought to be here In this study, lifespan of micro-switch for master controller is analyzed and prediction is performed based on its field data considering the special circumstances of railway vehicles operating agency, such as a large number of trains operates on the same line.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.751-757
• /
• 2007

This paper is concerned with the development of the requirements for railway safety support information systems. The five safety elements at the system level have been modeled based on the enterprise architecture approach. Specifically, the modeling has been carried out as follows. First, the requirements are derived according to EIA-632 process. Also, the possible scenarios on the accident-investigation-support are developed from the help of relevant personnel in the area. The developed scenarios are reflected in modeling the operational and system architectures of DoDAF approach using a CASE tool. From this architecture model, we can easily get the specifications required for the operations. These results can give the improved understanding of the railway safety system to the members of diverse teams and areas working for the system development.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.694-699
• /
• 2009

This paper presents a synchronous-reference-frame-based control of single-phase UPQC(Unified Power Quality Conditioner) to improve power quality in ac electrified railway systems. The proposed synchronous-reference-frame-based UPQC can compensate the voltage distortion, the voltage sag, the harmonic currents, and the reactive power instantaneously. The simulation results show that the UPQC can compensate the harmonic supply voltages, the voltage sag, the harmonic load currents, and the reactive power in electrified railway systems. Validity and effectiveness of the proposed UPQC control method based on the synchronous-reference-frame is illustrated through the simulation results.