• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2814-2820
• /
• 2011

Railway bridge, contact of vehicle needs to design considering the running safety about the running train load of the railway bridge, ride comfort and dynamic safety. Also, upper structure of the railway bridge has to satisfy design standard about moving load(train). So, the railway bridge has to satisfy the requirement for vertical acceleration of the bridge deck, vertical displacement of the bridge and face distortion, which is suggested railway design standard in Korea(2011.5.). In this study, it was investigated and evaluated to the running safety about the running train load of the railway bridge, ride comfort and dynamic safety with railway design standard for steel composite(Steel Box Girder) railway bridge considering KTX, freight train and standard train load.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.52-59
• /
• 1999

As the Korea construction market has recent3y opened, the needs to restructure the design standard for the technical advancement in design is increasing. Therefore, we proposed the design standard of railway according to the direction, which is presented in this study that analyze the present situation of the previous design standard. The new design standard of railway was tried to definite a limit in each service stage. This design standard will improve the design quality and induce the accumulation of technology. In addition, it will solve the organic contradiction of construction service. As a result, this research will bring the improvement in the design standard and contribute to the development of Korea construction industry.

• International Journal of Railway
• /
• v.2 no.4
• /
• pp.180-186
• /
• 2009

High speed railway challenge the design, construction and maintaining of traditional railway, many traditional design concepts have been changed. Transition of railway and bridge has two main problems. one is that different lines have different ability of resisting distortion in area of trial load, which was known that problem of smooth transition of stiffness, the other is that differential settlement between artificial structure and earth structure cause bending of railway. The two problems have effect on train moving. The principle of processing transition of railway and bridge is same in world, but it is difficult to find relationship between design standard of transition, vehicle performance, line standard, design speed and so on form documentation and data reports. Based on mechanics, the paper analyzed dynamic performance of transition of high speed railway, studied various rough elements which is effective to train moving, built mathematical model of interaction of train and transition of high speed railway and developed numerical simulation software. In various different work conditions, we did great quantity of numerical simulation, comprehensive analysis and performance analysis.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.81-87
• /
• 2009

Recent advances in computer technology have brought more dependency on software to railway signalling system. While much efforts have been reported to evaluate embedded software safety for railway signalling systems, not so much systematic approaches to evaluate software safety testing. In this paper, we propose a adaption of automatic software testing tool in terms of the design & coding standard for railway signalling system. The test items for the design & coding standard suggested in this study related international standards and MISRA-C. It is anticipated that it will be greatly helpful for the evaluation on the software for railway signalling system.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.365-371
• /
• 2007

The communication protocol for interface among railway signalling systems is designed and established as national standard in Korean from a few years ago. So the communication link for information transmission among railway signalling system can be a good example of application of this standard. Communication protocol which is standardized among Korean railway signalling is considered to apply information transmission. And we confirmed there is no the states of deadlock of livelock in std. protocol which is applied formal verification which is one of the analytic method for inspection of safety characteristics in the design course of protocol. But the safety of protocol has to necessarily accomplish this normal analysis approach about satisfying requirement matters with such this analytic approach. In this paper we analyzed the safety characteristics of standard protocol for Korean Railway signalling through the requirement matters for safety transmission of railway transmission system which is required in international standard. So through this study we confirm whether it satisfies safety requirement matters of the level which require in international standard and tried to confirm whether standard protocol has enough safety character in the real railway field.

• Journal of the Korean Society for Railway
• /
• v.9 no.1 s.32
• /
• pp.102-109
• /
• 2006

The PSC girders which currently used at highway bridge have the standard cross sections about 25m, 30m and 35m span. Thus, in case of highway bridge design, the bridge designer can choose the adequate standard cross section according to constructional condition. However, in railway bridge design, there are limitations on reasonable bridge design considering circumstances of a construction site and conditions of location etc, because the PSC girders used at railway bridge have the cross section about only 25m span length. In this study, the optimum design for the PSC girder railway bridge with 30m span length has been performed. Also, in order to investigate the dynamic stability of railway bridge using the optimum section of PSC girder, dynamic analysis has been carried out. From the results of analysis, it is suggested to denote the optimum section which satisfied the structural safety, dynamic stability and economical efficiency all together.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.960-964
• /
• 2011

High speed railway structure, contact of vehicle needs to design considering the running stability(dynamic behavior). Also, upper structure has to satisfy design standard about moving load, high speed train(KTX). So, the high speed railway structure has to satisfy the requirement of natural frequency, vertical acceleration on deck, face distortion and vertical displacement considering ride comfort, which is suggested Ho-nam high speed railway design standard. In this study, it was investigated and evaluated to the dynamic behavior for tow plate Girder railway bridge subjected to moving load considering real high speed train loads.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1138-1142
• /
• 2010

High speed railway structure, contact of vehicle needs to design considering the running stability(dynamic behavior). Also, upper structure has to satisfy design standard about moving load, high speed train(KTX). So, the high speed railway structure has to satisfy the requirement of natural frequency, vertical acceleration on deck, face distortion and vertical displacement considering ride comfort, which is suggested Ho-nam high speed railway design standard. In this study, it was investigated and evaluated to the dynamic behavior for a double-rib arch railway bridge subjected to moving load considering real high speed train loads.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.5-9
• /
• 2015

Reliability based limit state design method is replacing traditional deterministic designs such as allowable stress design and/or ultimate strength design methods in world trends. European design code(Eurocode) has adopted limit state design, and Korea road bridge design standard has also recently been transferred to limit state design method. In this trend, Korea railroad design standard is also preparing for adopting the same design concept. While safety factors are determined empirically in traditional design, load combinations as well as load factors are determined by solving limit state equations. General partial safety factors are evaluated by using AFORM(Advanced First Order Reliability Method) in the reliability based limit state design method. In this study sensitivity analysis is carried out for a dead load factor and a live load factor. Relative precisions of the dead load and the live load factors are discussed prior to the AFORM analysis. Furthermore the sectional forces of design and the material quantities required by two different design methods are compared for a PSC box girder railway bridge.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1149-1152
• /
• 2005

Recently, tunnel structure is being widely used in railway or roadway construction projects because earthwork causes large cutting and damages in environmental factors. However, there are many changes of design by different items comparing with design phase in tunnel structure by uncertain drawings. This study develops a standard process for the change of design to reduce change orders in construction phase.