• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.175-181
• /
• 2010

The government have plans to improve the railway transport capacity and transport hub for the sustainable national transport and logistics system. Specially, there are much efforts to improve transportation capacity such as high speed transportation of rail freight, enlargement of BT train, development of double stack train, etc. between railway transport hubs. If the transport capacity between railway logistics hubs is increased as planned, we must increase the handling capacity of railway hub terminals. But there are limits to enlarge the terminal infrastructure because of investment scale, location circumstances and urban development plans. To ensure the capacity, with the minimum required enlargement of infrastructure, it is necessary to extremely increase the efficiency of terminal operations. For improving the efficiency, we have to introduce the efficient terminal operation systems based on u-IT and operation optimize technologies. In this paper, we analyse the issues and problems of railway terminals(including ICD) and suggest the concept of intelligent railway terminal and the construction components of technology.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권5호
• /
• pp.248-254
• /
• 2001

The traction power demand highly varies with time and train positions and the traction load is a large-capacity current at single phase converted from 3-phase power system. Subsequently, each phase current converted from 3-phase power system cannot be maintained in balance any longer and thus the traction load can bring about imbalance in three-phase voltage. Therefore, the exact assessment of voltage unbalance must be carried out preferentially as well as load forecast at stages of designing and planning for electric railway system. The evaluation of unbalance voltage in areas, such as electric railway depots should be a prerequisite with more accuracy. The conventional researches on voltage unbalance have dealt with connection schemes of the transformers used in ac AT-fed electric railroads system and induced formulas to briefly evaluate voltage unbalance in the system(3). These formulas are still being used widely due to their easy applicabilities on voltage unbalance evaluation. Meanwhile, they don't take into account detailed characteristics of ac AT-fed electric railroads system, being founded on some assumptions. Accordingly. accuracy still remains in question. This paper proposes a new method to more effectively estimate voltage unbalance index. In this method, numerous diverted circuits in electric railway depots are categorized in three components and each component is defined as a two-port network model. The equivalent circuit for the entire power supply system is also described into a two-port network model by making parallel and/or series connections of these components. Efficiency and accuracy in voltage unbalance calculation as well can be promoted by simplifying the circuits into two-port network models.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1390-1394
• /
• 2009

In the paper We have analyzed the case study of the domestic and foreign railway logistic information systems based on the railway logistic to build the information architect basis system of real-time simultaneous. In case of domestic examples, We have analyzed the logistic information system used in Korea Railroad and the information systems of Kyungin ICD(Inland Container Depot) and Busanjin CY(Container Yard). In case of foreign example, we have analyzed the logistic information system of Japanese FRENS(Freight information network system) and the examples of freight tracking using RFID(Radio Frequency Identification). Through the above analysis, We have induced the main problems and improvement methods. We are able to build the railway-oriented information network system for the massive and efficient railway transportation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1765-1768
• /
• 2009

Honam area is one of the under-industrial areas in Korea and because of this it has low weight in the total container transportation in Korea. Also the railway distance from honam area to the main container ports like Busan port and Gwangyang port is so short that the portion of rail container transportation occupies about 10 percent in total container transportation amount in Honam area. But on the contrary of those situations, 1st step Jangsung inland container depot (ICD) was finished as one of the main logistics facilities in Korea and 2nd Jangsung inland container depot is under construction. To promote rail container transportation in Honam area which has shortage of container transportation demand, it is necessary to give adequate transport service to the client. So, this research studied some methods for promoting rail container transportation in Honam area. The subject of survey is freight agent and survey items are selected to find the present situation of rail container transportation in Honam area. And from the survey results various strategies will be suggested to promote rail container transportation in Honam area.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1481-1498
• /
• 2007

As railroad industry face the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high speed long distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for detailed operations of the sample maintenance center are developed. In this study, standard maintenance procedures, layout, equipments and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. Three simulation analysis using the developed simulation model are done. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Lastly, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared.

• 한국항만학회지
• /
• 제7권2호
• /
• pp.37-60
• /
• 1993

Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2359-2373
• /
• 2008

In 1991, Korean government decided to establish the Inland Container Depot for activating transportation of rail freight container and encourage the effectiveness of intermodal transport system. Therefore, the Ui-Wang ICD has been built in Kyonggi province and began to operate in 1993. However, Despite of original purpose of the Inland Container Depot, rail freight volume at public CY(Container Yard) in Ui-Wang ICD has been recorded very low. This paper deals with the promotion strategy for rail transport in Ui-Wang ICD. The relationship of conflicts between the rail-oriented transporters and road-oriented transporters in Ui-Wang ICD have been found through the TOC thinking process and some solutions are suggested. Some undesirable effects in operation of Ui-Wang ICD are listed and current reality tree(CRT) has been established and future reality tree(FRT) which includes some injections to active the rail transport in ICD has been recommended based on CRT. In order to make good solutions the situation in Busan-jin station ICD known as similar to Ui-Wang ICD has been analyzed.

• 한국철도학회논문집
• /
• 제9권3호
• /
• pp.282-290
• /
• 2006

In the current train operation system, large scaled stations like Cheongnyangni and Yongsan are not remote controlled from the central operator but manually by local operator. It is because there are so many entering and exit of trains between depot and mainline which are operating through the large scaled stations and it is very effective to traffic flow on the mainline. Therefore, Kyong Bong Technology Co., Ltd. (KBTech) and Korea Railway Research Institute (KRRI) are continuing the research and development to import 'Autonomous Decentralized System (ADS)'as part of a new train operation control system which is a national policy project of MOCT (Ministry Of Construction & Transportation). The concept of the 'Autonomous Decentralized System (ADS)' has born in 1970's in Japan by the influences of molecular biology. The special features of ADS are being a system that able to do the online expansion, online maintenance and fault tolerance. This thesis introduces the concept of technology of ADS and also describes the system designing & development to apply with large scaled stations.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.535-540
• /
• 2010

본 연구는 철도물류터미널에서 작업선 배정 및 열차조성을 위한 최적화 모형을 제시한다. 본 연구에서는 하루 터미널 작업 종료시간을 최소화하며 처리 컨테이너수를 최대화하는 다기준 정수 계획 모형을 개발하였고, 의왕ICD로부터의 실제 데이터로부터 구성된 현실 문제에 대해 본 모형을 적용하여 실험하였다. 실험 결과 목적함수의 가중치에 따라 다양한 파레토 최적해를 산출할 수 있었으며, 기존의 해보다 전체 작업종료 시간을 약 6% 감소시켰으며 이러한 결과는 본 연구에서 개발한 최적화 모형을 적용할 경우 설비의 추가적인 확장 없이도, 철도 컨테이너 터미널의 처리효율 향상을 가져올 수 있음을 의미한다.