• International Journal of Railway
• /
• v.5 no.4
• /
• pp.175-181
• /
• 2012

This study proposes a model for railway safety assessment with which the safety of whole railway system can be evaluated. The purpose of the assessment model is to generate safety indicators which quantitatively represent the degree of railway safety. Safety indicators were proposed as three indicators according to their functions; accident indicators, safety management indicators, and safety culture indicators. This paper describes the first result on the safety target which will be a key starting point toward the development of safety assessment model. It is recommended that the safety target to be composed of several sub-targets are apportioned to constituent components. It is concluded that the classification of safety target has influence on deciding components or attributes that constitute each sub-indicators; accident indicators, safety management indicators, and safety culture indicators. Based on this study, a railway safety assessment model will be developed in the following study.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1233-1235
• /
• 2008

The purpose of this study is to analyze human factors - stress, alcohol, fatigue - of the railway driver in domestic railway industry. This study proposes railway safety improvement of domestic railway by intensively comparing railway safety system overseas to reinforce domestic railway safety. Domestic railways well known the well-organized railway safety culture has brought up safety issues on their process of private management. With this process, also, domestic safety is requested by increasing sense of the safety for general public. This study expects Korean railways to become a well-organized that as removing insecure factors of domestic railway based on result comparing and analyzing the manual, factors and requirements of guideline for internal and external safety culture.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.671-675
• /
• 2008

Railway signal system is responsible for the safety operation of railway and performs vital functions as safe space control, route control and etc. These functions prevent collision accidents between trains and derailment accidents of trains. However, these accidents are occurred by some causes. It is necessary to analysis hazards, hazard frequency and risk contribution. And railway signal system must make practical application of the analysis results. This paper includes analysis results of railway accident data by FTA(Fault Tree Analysis) and hazards. Railway signal system must consider these hazards. This paper used the railway accident data of RSSB(Railway Safety & Standard Board) of UK. We will use the FTA result to set up a draft of safety criteria of railway signal system.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.319-326
• /
• 2001

Railway signaling safety system organizes equipments and facilities of railway, increases transport efficiency and assures safe operation of railway. In the early days of signaling system railway managers made sure of safety by using relay logic technology based on fail-safe concept. But the development result of computer and science having been introduced to railway industry, railway signaling equipments begin to be operated through micro electronic control system. Accordingly high speed and high density operation of train became possible. Software reliability and safety technology that controls important systems of railway was highlighted. In the middle of 1990s the standard or guideline of railway reliability and safety were studied and established, and are being reviewing in Europe, Japan etc. Our reliability and safety technology have depended largely on foreign countries. In this study we performed a basic study about the reliability of software that controls the railway signaling system.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1-6
• /
• 2005

To improve safety management of railway and cope with the factors to threat technical and social safety, we need to establish railway safety management system based on analysis of hazards and assessment of risk for railway system. So we have to conduct PHA(Preliminary Hazard Analysis) first to understand weak points and factors to possibly threat safety using analysis of related data such as past accident/incident data and safety regulation and classification standards of hazards/causes of railway accidents. Therefore in this research, we led types/dangerous events/causes of risks/factors of risks from hazard log developed based on railway accident classification and hazards of railway accident. PHA model for domestic railway system will be used in risk analysis and risk assessment of railway accident.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1097-1102
• /
• 2006

Under the necessity certification of railway supplies, an applicant should check the procedure of urban railway law and the new railway safety law. Currently, the Korean railway standards (KRS), formerly managed by Korea Railroad, have been managed by the Korean Ministry of Construction and Transportation. According to Korean railway safety law and its ordinances, which were committed to Korea Railroad Research Institute. It were established for the guarantee of railway safety, the management of KRS including enactment and revision of technical standards for railway vehicle and components. In this investigation, the detailed management procedure will be introduced for the effective management of Certification of Railway Supplies.

• Structural Engineering and Mechanics
• /
• v.46 no.4
• /
• pp.571-594
• /
• 2013

Railway truss bridges are amongst the essential structures in railway transportation. Minimization of the construction and maintenance costs of these trusses can effectively reduce investments in railway industries. In case of railway bridges, due to high ratio of the live load to the dead load, the moving load has considerable influence on the bridge dynamics. In this paper, optimization of the railway truss bridges under moving load is taken into consideration. The appropriate algorithm namely Hyper-sphere algorithm is used for this multifaceted problem. Through optimization the efficiency of the method successfully raised about 5 percent, compared with similar algorithms. The proposed optimization carried out on several typical railway trusses. The influences of buckling, deformation constraints, and the optimum height of each type of truss, assessed using a simple approximation method.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.2108-2115
• /
• 2008

Using transportations like railway, aviations and roads has been increasing continuously. Traffic accidents have been increasing as well. To prevent or lessen these accidents become a big issue to solve. Therefore, more enforced safety levels are being required to meet. In railway field, continuous efforts of railway safety are being executed to prevent traffic accidents. In present, a railway accident has been decreasing since subway accident happened in Daegu Subway in 2003. However, safety levels in railway field have not yet achieved as much as in advanced countries. Basic concept for enforced safety level in railway system is to prevent or minimize accidents by managing systems like related facilities, management method, organization, education. This is the same concept to minimize error rate in six sigma theory. In this paper, we are to apply six sigma techniques used in manufacturing industry to railway safety and go through ways to make more efficient railway safety system.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.528-535
• /
• 2011

According to railway safety regulations for securing the railway vehicle's quality and performance, it can be partly exempted that the performance tests and production inspections on the railway vehicles which are produced and assembled for the purpose of test and research. The reasons of this exemption are for ensuring maximum autonomy and for saving time considered the development period of railway vehicle. However, it was continuously demanded the necessity of supplementation on the confirmation about railway vehicle's quality & performance. Therefore, we added "The monitoring step" which is for securing the quality and performance in high speed railway vehicle's subsystem & compartment to supplement those tests & inspections in development. In this paper, based on a standard ABS(Activity Breakdown Structure) of railway vehicle and a WBS(Work Breakdown Structure) of the railway vehicle system, we investigate the necessity of monitoring in the High speed railway vehicle development. And by comparing and analyzing the essential requirements of international standard, IRIS(International Railway Industry Standard) & TSI(Technical Specification for Interoperability), we try to examine a standard monitoring procedure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.953-958
• /
• 2015

Generally, Urban railway have special characteristics with short distance journey and minimum headway intercity transportation. These days, urban railway operators choose the driverless operation system without driver. On the contrary, Conventional & high speed railway utilize for long distance and high speed running. Because of special conditions of freight railway operation compared with urban railway, operation of conventional & high speed railway is showed very different characteristics. In this paper, We compares different operation scheme of urban railway and conventional & high speed railway and then present condition for train control system based on radio.