• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.778-787
• /
• 2009

This paper illustrates some examples of socio-economic changes brought about by railroads in Korea. The Korean railroad network has been running for 110 years since it started operation in 1899. The opening of railroad system in Korea has had a huge influence on its society, not only transportation but also in the development of infrastructure and formation of new cities, such as Daejeon Metropolitan City, which were built along with the rail network. This paper will examine some examples of the influence that railroads have had on Korean society: the changes of transport route from road to railroad, the emergence of new cities, industries and culture. Also, this paper will look over the various functions of railroads in Korea, and then it compares with those of foreign countries. It gives us chance to examine a specificity as well as universality in the function of railroads.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1398-1405
• /
• 2015

Domestic railway communication in Korea has been introduced for mutual communications among control center, operation staffs, and maintenance staffs. It has been mainly used as railway disaster and safety functions from VHF and UHF from 1980’s and TRS-Astro and TRS-Tetra from the 2000’s. Recently for urban railways communications, 18GHz and 2.4GHz ranges have been utilized for image transmissions and control command communications, respectively. This paper analyzes technical development of LTE-R, LTE communication for Railways, that has been designed as a single integrated railway wireless network in order to merge the current various communication systems. In this paper, we present the details of the examination of the LTE-R test-bed using 2.6GHz test frequency in Daebul test line through CW test and optimization test.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.414-416
• /
• 2013

As the usage of the electric power train increases, the importance of the control network between the electric control devices grows. IEC proposed a revision of IEC-61375, a standard of the networking among electric devices within a train, to adopt Ethernet as a backbone of train network. This paper performed the reliability analysis of three configurations of Ethernet-based networking within a electric power train that are recommended in IEC-61375 standard. The analysis results show that MTTF(mean time to failure) of the redundant configuration is 20,086 hours, which is a about 3 times longer than the linear configuration.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.882-887
• /
• 2014

In this paper, the water cooling method among the forced coolant cooling methods is considered to be applied to the 110kW-class IPMSM for railway vehicles. First, basic thermal property analysis of the IPMSM is conducted using the three-dimensional thermal equivalent network method. Then, based on the results of the basic thermal property analysis, some design requirements for the water cooling jacket are deduced and a basic design of the water cooling jacket is carried out. Finally, thermal equivalent circuit of the water cooling jacket is attached to the IPMSM's 3D thermal equivalent network and then, the basic thermal and effectiveness analysis are conducted for the case of applying the water cooling jacket to the IPMSM. In the future, the thermal variation trends inside the IPMSM by the application of the water cooling jacket is expected to be quickly and easily predicted even at the design step of the railway traction motor.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.241-243
• /
• 2005

The study for ubiquitous computing infra is proceeding actively, it make possible to use service and access network anywhere, anytime because of wire/wireless communication technology and progress of hardware. Domestically, study for the network mobility support technology which is the key technology for future ubiquitous computing realization have progressed, but that is insufficient. Especially, there is no study for independent mobility support study about railway wireless network. So, this study propose network mobility management technology for mobile network infra in railway and proper network model in train.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.551-557
• /
• 2013

This research aims to conduct a study on the feasibility of the LTE communication method for developing a dedicated integrated railway wireless network. An empirical analysis was carried out by establishing a dedicated integrated railway wireless network in an approximately 12km section between Illo station and Daebul station on the Honam line. Korean wireless communication methods for railway safety are different depending on each line, which makes it difficult for railway workers to cooperate with. This causes various problems. There is the ever-present risk of accidents due to call disconnection between wireless communication systems, frequency interference from commercial networks, and crosstalk. This study verified the feasibility of the 4th generation communication system, LTE, over the dedicated integrated railway wireless network as a solution for the above mentioned problems. The result shows this communication system exceeded existing performance standards of Europe GSM-R in every test item despite the location constraint of train tracks on the base station establishment.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2206-2207
• /
• 2011

컴퓨터 통신기술 발달에 따라 철도의 열차제어에 대한 기술도 기존의 궤도회로기반에서 무선통신기반으로 변화되고 있다. 국내에서도 도시철도용 무선통신기반 열차제어시스템의 개발이 진행됨에 따른 개발품의 성능평가에 대한 관심이 높아지고 있다. 따라서 본 논문에서는 새롭게 개발되는 무선통신기반 열차제어시스템의 성능평가를 위해 성능시험 항목의 선정과 현장에서의 시험을 위한 시험선로 지상 및 차상인프라 구축에 대한 기본적인 검토를 기반으로 시험 및 성능평가 시행의 종합기본계획을 수립하는 검토를 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1236-1238
• /
• 2001

The electrified railway has various power supply schemes. Although the identical trains are operated in same condition and the impedance of track are equal, the genealogy impedance of track is changed according to composition method of feeding scheme. So, the collection voltage of train and supplying power from railway substation are greatly unlike. For simulation of collection voltage and power supply according to feeding scheme, using 6-port network analysis proposed previously simulate collection voltage and supply power according to feeding scheme(Parallel Post feeding system, normal feeding system and tie feeding system) and compare and investigate each characteristics.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2020

Railway transportation is the main land-based transportation in most countries. Accordingly, railway-transportation safety has always been a key issue for many researchers. Railway pedestrian accidents are the main reasons of railway-transportation casualties. In this study, we conduct experiments to determine which of the latest convolutional neural network models and algorithms are appropriate to build pedestrian railroad accident prevention systems. When a drone cruises over a pre-specified path and altitude, the real-time status around the rail is recorded, following which the image information is transmitted back to the server in time. Subsequently, the images are analyzed to determine whether pedestrians are present around the railroads, and a speed-deceleration order is immediately sent to the train driver, resulting in a reduction of the instances of pedestrian railroad accidents. This is the first part of an envisioned drone-based intelligent security system. This system can effectively address the problem of insufficient manual police force.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.530-537
• /
• 2006

Recently, the railroad route plan is trying to minimize the damage of the local resident which is caused by railroad construction. For this reason, reducing the banking height of soil roadbed, lowering the bridge girder height of a solid intersection and a part of cross river, the through bridge type which can achieve a required span length must apply. The representative through bridges of railroad are arch bridges, truss bridges and plate girder bridges, the through plate girder bridge of variable section can apply that the span length of these bridges is about $30{\sim}50m$, namely, middle span length bridge types, and that can satisfy structural capacity and beauty of railroad at the same time. This paper introduces plan and design process of the Su-eo cheon bridge applied by a through plate girder bridge type of the Jinju-Gwangyang double track 6th construction ordered at Korea Rail network Authority in 2005.