• Journal of Korea Technology Innovation Society
• /
• v.3 no.3
• /
• pp.1-17
• /
• 2000

This paper shows the institutional limits of technological innovation at the railway package service, that is the limits of introducing the package express system. The railway package service, owned by government and operated by D company, has been suffered severe operating loss since early 1990's. The package express system supported by information network and co-working with inner city quick service might be an solution for the railway package service. But there are several obstacles such as labor union and the rigidities of the Korean National Railroad of government agency.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.616-623
• /
• 2006

As we have understood the commonly launched T-DMB service from December 2005, we kindly recommend to apply LCX cable installing solution which can be covering underground subway and tunnel T-DMB signal shadow area with most efficient network implementation method. Subway passengers would be enjoyable continuous T-DMB services through LCX cable installing solution.

• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.105-113
• /
• 2017

Recently mountain tourism has been promoted and introduction of railroads with utilizing mountain resources is being planned. With the government policies to increase the share of eco-friendly transportation on railroad, national double-tracking of single rail and improvement projects are on going. However, the eco-friendly railroad policy suggests the environmental impact assessment items only on air quality, water quality, geographical/geological features, fauna/flora, natural/environmental resources, noise/ vibration, and recreation/landscape. And for fauna/flora and natural/environmental resources, confirming the presence of environmental protection zone is enough to satisfy legal requirement. This study suggested to evaluate environmental/ecological values with quantitative data. Evaluation indices and evaluation items have been selected to provide the data. Each of the subject map and railroad network was overlapped. The study selected naturalness and diversity as major indicators and calculated weight values of the items under the indicators, which are to be usd for the selection of the sites for railway development. This assessment method could be applied to the environmentally friendly construction of railroads in the future.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.20-30
• /
• 2017

Due to the evolution of wireless communications technology, Long Term Evolution (LTE), which is a $4^{th}$ generation mobile communications system, has been adopted as a railway communications system. This LTE Railway (LTE-R) system is composed of various elemental functions, which are largely categorized into public safety and wireless communications for train control. Research on the public safety functions of railway communications have their roots in TRS based national public safety communication systems, and research on wireless communications functions for train control have their roots GSM-R, which is utilized by the ETCS in Europe. Based on these circumstances, this paper first analyzes the requirements for developing public safety technology in LTE-R, and compares those requirements with the functions of public safety LTE (PS-LTE), which is being deployed for the first time in the world by the South Korean government. Based on an analysis of the common and specific functions of LTE-R and PS-LTE, we conclude that there is little problem in integrating LTE-R and PS-LTE from the perspective of functionality. Second, this paper provides a comparison of the LTE-R requirements for the Quality of Service (QoS) with those of GSM-R utilized by the ETCS. This offers a guideline to allow LTE-R to be applied to a 500km/h train control system.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3756-3760
• /
• 2010

In this paper we propose network design for power line communication of electric railway using messenger wire. we carried out feasibility study on the power line communication(PLC) using Contact wire and messenger wire which are required at electric railway. First of all, full-duplex data communication was implemented using coupler which is suspended on messenger wire at non-voltage state. We verified data transfer rate was found to be good, and then proposed a design example of PLC network as the main components for PLC. we will study continuously make an effort to verify on the network design of PLC for further study.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.429-431
• /
• 2003

CCTV network has been implemented to transmit the image information of platform, ticket gate and transfer section to local headquarters in the KNR(Korean National Railroad). But, communication system for transferring image information around accident field or wayside has not been established ret. thus, at Present implementation of communication equipment is necessary for dynamic image of unspecified accident to be transmitted to headquarters. Copper cable communication network is run by KNR, but it is processing installation of optical cable in connection with the implemental plan for high-speed network from now on. And, the capacity of communication channel will be guaranteed much more than now between station and station. station and central headquarters when optical cable is completed. This study analyzes the image equipment of field for transmission and estimated matters to transmit image information of accident field to headquarters with using communication infrastructure. And, the study considers implemental method of communication network for long-distance image transmission from dozens to hundreds kilometers.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.19-26
• /
• 2018

This paper presents a structuring process of unstructured social network service (SNS) messages on rail services. We crawl messages about rail services posted on SNS and extract keywords indicating date and time, rail operating company, station name, direction, and rail service types from each message. Among them, the rail service types are classified by machine learning according to predefined rail service types, and the rest are extracted by regular expressions. Words are converted into vector representations using Word2Vec and a conventional Convolutional Neural Network (CNN) is used for training and classification. For performance measurement, our experimental results show a comparison with a TF-IDF and Support Vector Machine (SVM) approach. This structured information in the database and can be easily used for services for railway users.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.27-34
• /
• 2016

In the train system, railway vehicles are connected in a line. Therefore, this feature should be considered in composing network topology in a train system. Besides, inter-car communication should be distinguished from in-car communication. As for the inter-car communication, the hybrid topology was proposed to use rather than the conventional ring, star, daisy-chain, and bus topologies. In the hybrid topology, a number of cars are bound to be a group. Then star topology is used for the communication in a group and daisy-chain topology is used for the communication between groups. Hybrid topology takes the virtue of both star and daisy-chain topologies. Hence it maintains communication speed with reducing the number of connecting cables between cars. Therefore, it is important to choose the number of cars in a group to obtain higher performance. In this paper, we focus on the optimization of hybrid topology for railway cars. We first assume that the size of data and the frequency of data production for each car is identical. We also assume that the importance for the maximum number of cables to connect cars is variable as well as the importance of the communication speed. Separated weights are granted to both importance and we derive the optimum number of cars in a group for various number of cars and weights.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.436-444
• /
• 2016

The primary windings of the main transformer for rolling stock have several natural frequencies that can occur internal resonance with transient voltages induced on a high voltage feeding line. Factory testing is limited in its ability to determine whether or not transient voltage with various shape and duration can be excitable. This study presents the design of a high voltage windings model and simulation and analysis of the internal resonant characteristics in terms of the initial voltage distribution and voltage-frequency relationship using the electromagnetic transients program (EMTP). Turn-based lumped-parameters are calculated using the geometry data of the transformer. And, sub-models, being grouped into the total number of layers, are composed using a ladder-network model and implemented by the library function of EMTP. Case studies are used to show the layer-based voltage-frequency relationship characteristics according to the frequency sweep and the voltage escalation and distribution aspects in time-domain simulation.