• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.31-45
• /
• 2017

According to the railway accident statistics in recent years, the frequency of accidents has been significantly reduced, due to the advance of related technologies and the establishment of safety information management systems. Nonetheless, accidents due to errors in the operation and maintenance phase and faults in safety design continue to occur. Therefore, to prevent accidents, guidelines for the safety design and manufacture of railway vehicles were established, and a request for the independent safety evaluation of safety designs was made. To respond to this, rail system developers must prepare safety cases as a safety activity product. One of the main items of these safety cases is the safety-related application conditions (SRAC) and, thus, the question of how to develop these SRAC is an important one. The SRAC studies reported so far focused only on the simplicity of the derivation procedure and the specific safety activities in the design phase. This method seems to have the advantage of quickly deriving SRAC items. However, there is a risk that some important safety-related items may be missing. As such, this paper proposes an improved method of developing the SRAC based on the idea of performing both the safety design and safety evaluation activities throughout the whole system lifecycle. In this way, it is possible to develop and manage the SRAC more systematically. Especially, considering the SRAC from the initial stage of the design can allow the safety requirements to be reflected to a greater extent. Also, an application case study on railway signaling systems shows that the method presented herein can prevent the omission of important safety-related items, due to the consideration of the SRAC throughout the system lifecycle.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.7-17
• /
• 2005

Transportation is from an individual mobility. Various efforts to propose specific values or the individual mobility have been conducted in diverse transportation environment. However, mobility studies for multimodal public transportation are rare especially on not the range of line but area. This study propose a method to calculate transit mobility indices as expanding mobility analysis from point-to-point to area-to-area, considering access time to transit facility, running time and transfer time of passengers. To extract mobility indices, we included walking as a lowest category of mode and set passenger car as a competitive mode to transit mode. This study propose three public transportation mobility indices as 1) how competitive public transportation facility is offered against passenger car 2) how convenient transit mode including walking is provided against passenger car from origin to destination and 3) how many various paths are presented to support passenger's travel between regions. These indices are tested on the Seoul metropolitan area with 10 lines of urban rail and about 420 lines of bus. In addition, we proposed two political applications of proposed mobility indices to increase public transportation mobility between two regions and to maximize the mobility of study area when a line is added in the area.

• Journal of Distribution Science
• /
• v.13 no.12
• /
• pp.53-63
• /
• 2015

Purpose - Recently, creating shared value (CSV) has attracted attention through plan sustainability and the growth of corporate management. Porter and Kramer (2011) defined the core concept of CSV as social value, economic profits, improvements in the economic social condition, and reinforcing competitiveness. The purpose of CSV, which is to pursue economic profits through a social solution to the problem, agrees with managing the objective of a social enterprise that prioritizes the pursuit of profits through the realization of a social purpose. Today, CSV studies focus on CSR and sustainability and reinforce competitiveness. However, few studies focused on the social economy. Precedent studies examined CSV using a company example, and few studies exist from the perspective of consumers and the point of view of a market society. Research design, data, and methodology - Therefore, this study examines CSV in comparison to a background of the social economy. This study also investigates and analyzes the concept of social value from the point of view of consumers, social problems, consumption value, corporate value, and the influence of consumers. This article develops three hypotheses. Hypothesis 1 investigates the correlation with social innovation that consumers thought as being necessary for social innovation by a company. Hypothesis 2 is used to confirm the influence of consumers in CSV. Therefore, this article investigates the influence of consumers on consumption action for companies that are indifferent to social problems. Hypothesis 3 is used to verify the correlation between the value that consumers demand through consumption and the corporate value that companies pursue other than profits. The three hypotheses were adopted and met the standard for suitability. Results - The importance of the CSV study from the consumer perspective was confirmed using the influence of consumers on CSV. Because the objective of company activities is either the consumer or the market, the influence that extends to interactions between the company and consumers to ensure the success of a business is significant. Regarding the CSV study, because it was an initial study, various approaches are subsequently developed. However, conceptual and practical case studies on CSV currently exist that may be used to verify the factors that comprise CSV. Therefore, the company example may enable verification of the factors that influence the composition of CSV through identification from the consumer perspective. In addition, studying CSV as an action result (of consumer satisfaction, of a company's profits and competitiveness, and of society's cancellation of a social problem) may enable the realization of a practice paradigm as opposed to simply thought and faith. Conclusions - First, this study confirms the social value of a business through the feasible and common pursuit of consumers by corporations. Second, customer influence accounts for an important part of CSV. Third, shared value commonly provides a necessary advantage to consumers, corporates, and society, and contributes to the economy and healthy social development. Fourth, corporates can conduct a business, generate profits, and realize value through improvements in social problems and by addressing their competitive strengths and weaknesses.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.227-238
• /
• 2014

There is no question that railroad investment is crucial for better transport systems and the Korean government has continued to invest in railroad facilities. Nevertheless, the modal share of railroad, in particular, for freight has decreased. This is because rail freight transport can hardly meet customer needs such as just-in-time(JIT), a door-to-door service, compared to road transport, to be specific, trucking which can directly carry the freights to the final destinations. This has made the value of the railroad infrastructure less, which has been operated for the past 114 years. This study proposes a new freight movement concept called Piggy Back System. This system can carry freight trucks on the trains and deliver the freights to the final destinations. It can make a door-to-door deliver system possible for railroad transportation, which is the key factor for modal shift from road to railroad. For implementing this, this study proposes three important things: the cost-efficient reforming way of railroad yard that has been used for the past 114 years, the diagram plan of train services, and some technical reviews like clearance limits. This is the first study with practical proposals and solutions on this topic in Korea. The suggestions of this study cut down distribution costs by more than seven trillion won.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.146-156
• /
• 1998

To mitigate excessive noise from highways, and high speed rail road, it is often necessary to construct a noise barrier. Absorptive barroer attenuation solution is obtained for the problem of diffration of a plane wave sound source by a semi-infinite plane. A finite region in the vicinity of the edge has an highly absorbing boundary condition ; the remaining portion of the half plane is rigid. The problem which is solved is a mathematical model for a hard barrier with an absorbing edge. If the wavelength of the sound is much smaller than the length scale associated with the barrier, the diffraction process is governed to all intents and purpose by the solution to a standard problem of diffraction by a semi-infinite hard plane with an absorbent edge. It is concluded that the absorbing material that comprises the edge need only be of the order of a wavelength long to have approximately the same effect, on the sound attenuation in the shadow side of the barrier. Traffic noise is composed of thousands of sources with varying frequency content. To simplify noise predictions when barriers are present, an effective frequency of 550Hz may be used to represent all vehicles. The wavelength of sound at f=550Hz for traffic noise is about 2 feet. According to the above conclusion, an absorptive highway noise barrier is only needed to cover to cover approximately a 2 foot length of absorbing material. It would be more economical to cover only the region in the immediate vicinity of the edge with highly sound obsorbent material.

• Journal of Surface Science and Engineering
• /
• v.49 no.6
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.549-562
• /
• 2017

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.386-393
• /
• 2013

In this study, the so-called repeated plate load bearing test (RPBT) used to get $E_{v2}$ values in order to check the degree of compaction of subgrade, and to get design parameters for determining the thickness of the trackbed foundation, is investigated. The test procedure of the RPBT method is scrutinized in detail. $E_{v2}$ values obtained from the field were verified in order to check the reliability of the test data. The $E_{v2}$ values obtained from high-speed rail construction sites were compared to converted modulus values obtained from resonant column (RC) test results. For these tests, medium-size samples composed of the same soils from the field were used after analyzing stress and strain levels existing in the soil below the repeated loading plates. Finite element analyses, using the PLAXIS and ABAQUS programs, were performed in order to investigate the impact of the strain influence coefficient. This was done by getting newly computed $I_z$ to get the precise strain level predicted on the subgrade surface in the full track structure; under wheel loading. It was verified that it is necessary to use precise loading steps to construct nonlinear load-settlement curves from RPBT in order to get correct $E_{v2}$ values at the proper strain levels.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.13-31
• /
• 2021

Since the signing of the Korea-Europe Free Trade Agreement, the volume of trade transactions between South Korea and Europe has increased. The traditional single-mode transport system has been transformed into an intermodal transport system using two or more modes of transport. In addition, the conventional sea and air transport routes have been restricted, leading to a decline in Korean exports to Europe, and the rail transport mode is becoming mainstream in the market due to the influence of COVID-19. This paper focuses on the China-Railway Express to explore a new intermodal transport route from Korea to Europe. First, the fuzzy analytic hierarchy process (AHP) is used to evaluate the factor weights when selecting intermodal transport routes from Korea to Europe. Then, the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method is used to rank three alternatives. The results show that among the four factors (total cost, total time, transportation capability, and service reliability), the total cost is the most significant factor, followed by the total time, service reliability, and transportation capability. Furthermore, the alternative route 1 (Incheon-Dalian-Manchuria-Hamburg) is preferred.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.454-461
• /
• 2007

Portable embedded systems have recently become smaller in size and offer a variety of junctions for users. These systems require high performance processors to handle the many functions and also a small battery to fit inside the system. However, due to its size, the battery life has become a major issue. It is important to have both efficient power design and management for each function, while optimizing processor voltage and clock frequency in order to extend the battery life of the system. In this paper, we calculated the efficiency of power in optimizing power rail. This system has two microprocessors. One is used to play music and movie files while the other is for DMB. In order to reduce power consumption, the DMB microprocessor is turned of while music or videos are played. Lastly, DVFS is applied to the processor in the system to reduce power consumption. Experimental results of the implemented system have resulted in reduced power consumption.