• KSBB Journal
• /
• v.14 no.6
• /
• pp.655-660
• /
• 1999

Supercritical fractional extraction of DHA and EPA from the mixture of fatty acids composing the fish oil was performed. The compositions, extracted quantities, and cumulative extracted quantities of fatty acids in the extract and the raffinate were investigated according to the fractional steps. The temperature and pressure for the miximum concentration of DHA and EPA in the extract or the raffinate were 60$^{\circ}C$ and 101 bar respectively among the extraction conditions considered in this study. In this case, the weight percent of EPA in the extract was 50% and that of DHA in the raffinate was 40%. These values were two times higher than those in fish oil. THe same temperature and pressure were used to extract DHA and EPA from the mixture of fatty acids whose the initial weight percent of DHA was 34%. The weight percent of DHA in the raffinate after the fourth fractionation was 7-%. And the remaining weight of DHA in the raffinate was 80% of DHA initially loaded in the extraction vessel.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.623-627
• /
• 2011

Simulated moving bed(SMB) chromatography was simulated for separating loxoprofen racemates. Aspen chromatography simulator was utilized with Henry's constants of loxoprofen racemates which were obtained by batch chromatography experiments. Raffinate stream concentrations as well as purities were calculated with various $m_2$ and $m_3$ values in the triangle diagram obtained from two Henry's constants 7.9 and 10.1. Purity values are high under the conditions that the $m_2-m^3$ coordinates are near the left central region in the diagram and feed flow rates are lower. Concentration profiles of raffinate and extract streams along SMB columns explain the purity change in the case of increasing the column numbers installed at SMB.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.548-551
• /
• 1993

A simple and new uranium analysis technique for raffinate solution of nuclear fuel conversion process was developed using a time-resolved laser-induced fluorimetry. The addition of 4 M-phosphoric acid more than 10 times in volume to the raffinate sample was found to be efficient for obtaining stable uranium fluorescence signal which was not influenced by many fluorescence quenchers. A calibration curve of a good linearity for the fluorescence intensity vs. the uranium concentration was obtained at the range of 3.0$\times$10$^{-6}$－6.0$\times$10$^{-5}$ M U $O_2$$^{2＋}$ in the raffinate samples.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.155-159
• /
• 2019

As a part of improving the quality for the fraction of the waste plastics pyrolysis oil (WPPO), the recovery of paraffin components contained in the fraction was investigated by dimethylformamide (DMF) equilibrium extraction. The fraction of a distilling temperature of $120{\sim}350^{\circ}C$ recovered from WPPO by the simple distillation and the aqueous solution of DMF were used as a raw material and solvent, respectively. The concentrations of paraffin components ($C_{12}$, $C_{14}$, $C_{16}$ and $C_{18}$) contained in the raffinate decreased by increasing the mass fraction of water in the solvent at an initial state ($y_{w,0}$), whereas, the concentrations of paraffin components contained in the raffinate increased by increasing the mass ratio of the solvent to the feed at an initial state $(S/F)_0$. The concentrations of $C_{12}$, $C_{14}$, $C_{16}$ and $C_{18}$ paraffin components present in the raffinate recovered at $(S/F)_0=10$ were about 1.37, 2.0, 2.46 and 3.16 times higher than those of the raw materials, respectively. Recovery rates (residue rates present in raffinate) of paraffin components rapidly increased with increasing $y_{w,0}$, and decreasing $(S/F)_0$. The raffinate recovered through this study was expected to be used as a renewable energy.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.692-696
• /
• 2008

There is not much method of using C4 Raffinate III, despite having high olefin contents. The majority of the C4 Raffinate III have been converted into n-butane through hydrogenation, and sold as LPG. The C4 Raffinate III is rich 2-butenes with very low isobutene and isobutene contents. The 2-butenes are converted into 1-butene in the vicinity of thermodynamic equilibrium yield through positional isomerization with n-almumina catalyst calcinated at $400{\sim}600^{\circ}C$. The overall process is composed of isomerization-reactor, de-1-buteneizer to prepare the reactants and to enrich reactive products, and 1-butene column to product a high purity 1-butene. The production of 1-butene increases by 40~60 wt% with the selective positional isomerization from the existing separation method.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.630-634
• /
• 2018

The recovery of paraffin components contained in the fraction as a part of improving the quality for the fraction of waste plastics pyrolysis oil (WPPO) was investigated by batch cocurrent 4 stages equilibrium extraction. The fraction at a distilling temperature of $120-350^{\circ}C$ recovered from WPPO by the simple distillation and a little water-added dimethylformamide (DMF) solution were used as a raw material and solvent, respectively. As the number of equilibrium extraction (n) and the carbon number of paraffin component increased, the concentration of paraffin component contained in the raffinate increased. The concentrations of $C_{12}$, $C_{14}$, $C16$ and $C_{18}$ paraffin components present in the raffinate recovered at n = 4 were about 1.2, 1.5, 1.6 and 1.8 times higher than those of using the raw materials, respectively. Recovery rates (residue rates present in raffinate) of paraffin components rapidly decreased with increasing n, and increased sharply with increasing the carbon number. Furthermore, it was possible to predict the recovery rates at n = 1 - 4 for all paraffin components ($C_7-C_{24}$) contained in the raw material. The raffinate recovered through this study is expected to be used as a renewable energy.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.4
• /
• pp.341-345
• /
• 2005

Since it is troublesome to estimate adequate flow rates in four sections of SMB chromatography, a systematic determination of the flow rates has been suggested by using ketoprofen as a model chiral enantiomer. S-ketoprofen. less retained species, was separated from raffinate stream and the variation in its purity was dependent on the changes of the flow rate of section 4 ($Q_4$), the raffinate flow rate ($Q_{raf}$), and the feed flow rate ($Q_{feed}$) under a fixed switch­ing time t$^{\ast}$. When one parameter was changed at the given experimental condition, purities of product were changed and these phenomena has be well explained by the triangle theory.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.110-115
• /
• 2006

We conducted a sensitivity analysis of the simulated moving bed (SMB) chromatography with the case model of the separation of two amino acids phenylalanine and tryptophan. We consider a four-zone SMB chromatography where the triangle theory is used to determine the operating conditions. Competitive Langmuir isotherm model was used to determine the adsorption isotherm. The finite difference method is used to solve nonlinear partial differential equation (PDE) systems numerically. We examined the effects of alterations in the operating conditions(feed-extract, feed-raffinate, eluent-extract, eluent-raffinate, recycle, and switching time) and the adsorption isotherm parameters (Langmuir isotherm parameters a and b) on SMB efficiency. The variation range of operating conditions and Langmuir isotherm a was between -50 and 50% of original value and the variation range of the Langmuir isotherm b was between $2.25^{-5}$ and $2.25^5$ times of original value.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3808-3814
• /
• 2023

The thermal stability of nitric acid solutions after contact with non-irradiated and irradiated tributyl phosphate (TBP) and its solution in Isopar-M has been studied. It has been established that exothermic processes occur during heating due to the interaction of soluble radiolysis products and the decomposition of the extractant with nitric acid. Such processes can occur at temperatures below 100 ℃, but unlike a thermal explosion that occurs in seconds, they are longer in time and are accompanied by weak heat evolution. Their intensity depends on the composition of the extractant, the concentration of HNO₃, and the volume ratio of the organic and aqueous phases. The presence of extractant degradation products in raffinates does not pose a risk of a rapid evolution of gaseous products during evaporation, however, the presence of reducing agents can significantly increase the intensity of the exothermic decomposition of raffinates.